{"product_id":"50kva-able-diesel-generator-pl50x3","title":"50kVA ABLE Diesel Generator PL50X3","description":"\u003cp\u003eThe PL50X3 is a 50kVA three phase diesel generator rated 50kVA (40kW) prime (PRP) and 55kVA (44kW) standby (ESP) at 415V, 50Hz and a power factor of 0.8. It is powered by a Xinchai 4D35ZD, a four cylinder, water-cooled diesel of 3.5 litres running at 1500 rpm, and drives a four-pole brushless synchronous alternator with AVR. It starts electrically on 12 volts from the included battery, and protection is an IP67-enclosed RCD plus over current protection.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe alternator is built with class H insulation and IP23 protection, and voltage regulation of ±0.5% keeps the output steady as loads change.\u003c\/li\u003e\n\u003cli\u003eA switch or external controller can start the set through the ComAp AMF controller's two-wire remote start.\u003c\/li\u003e\n\u003cli\u003eTwo 32A and one 20A three phase outlets and one 15A single phase outlet are rated IP66 (dust tight and protected against powerful water jets), and hardwire terminals suit a fixed connection.\u003c\/li\u003e\n\u003cli\u003eThe lockable, sound deadened canopy has a weather-resistant powder coat and stainless steel fittings.\u003c\/li\u003e\n\u003cli\u003eThe specification includes mine site ready bunding for sites that need fuel spills contained.\u003c\/li\u003e\n\u003cli\u003eAmbient temperatures from -25°C to 45°C are specified, along with humidity below 80% and altitude below 1000 m.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA 290 litre tank and fuel use of about 10 litres an hour at prime load work out to about 29 hours of running. Noise is 66.4 dB(A) at 7 m. The engine is rated 49.0 kW prime and 54.0 kW standby. The design standards are CE, ISO 8528-5:2005, AS 3000-2018 and AS 3010-2017.\u003c\/p\u003e\n\u003ch3\u003eWhat it will run\u003c\/h3\u003e\n\u003cp\u003eAt 40kW prime the PL50X3 has a rated current of about 69A per phase, and at a power factor of 0.8 the loads should be added up in kW as well as kVA. For a three phase set like this, frame the choice around the loads of the site. Typically it suits the refrigeration, pumps, lighting and motors of a cold store, a farm processing operation, a club or a small factory. Because motors draw several times their running current as they start, bring the largest on first, then add other loads, and keep the three phases balanced. The running and starting power of each machine is on its compliance plate. The site load should be assessed by an electrician before the set is specified, and a licensed electrician should do the switchboard connection. Send your load list to us and we will help with sizing.\u003c\/p\u003e\n\u003cp\u003eThe PL50X3 suits cold stores, farm processing, clubs and supermarkets, small factories, and mine and construction camps. With both prime and standby ratings it can cover a mains outage or supply a site that runs it for regular periods.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul style=\"list-style-position: outside; padding-left: 1.5em; margin-left: 0;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput:\u003c\/strong\u003e 50kVA (40kW) prime, 55kVA (44kW) standby @ 0.8PF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated current:\u003c\/strong\u003e 69 Amps per phase (prime)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine:\u003c\/strong\u003e Xinchai 4D35ZD four-cylinder diesel, 1500rpm, water cooled\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlternator:\u003c\/strong\u003e Three phase 4-pole brushless synchronous alternator with AVR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController:\u003c\/strong\u003e ComAp AMF20, two-wire remote start\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStart type:\u003c\/strong\u003e 12 volt electric, battery included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhase \/ voltage:\u003c\/strong\u003e Three phase, 415V, 50Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel:\u003c\/strong\u003e Diesel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel tank:\u003c\/strong\u003e 290 L\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel use:\u003c\/strong\u003e 10 L\/hr at prime load\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRun time:\u003c\/strong\u003e 29 hrs continuous at prime load\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise level:\u003c\/strong\u003e 66.4 dB(A) @ 7m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlets:\u003c\/strong\u003e 2 x 32 Amp and 1 x 20 Amp three phase and 1 x 15 Amp single phase IP66 outlets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardwire terminals:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection:\u003c\/strong\u003e RCD to Australian Standards (IP67 enclosed), over current protection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCanopy:\u003c\/strong\u003e Lockable, sound deadened, weather-resistant powder coat, stainless steel fittings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMine spec:\u003c\/strong\u003e Mine site ready bunding\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (L x W x H):\u003c\/strong\u003e 210 x 95 x 152 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1,315 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 12 months or 1,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine configuration:\u003c\/strong\u003e 4 cylinder, 3.5 L\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine output:\u003c\/strong\u003e 49.0 kWm prime, 54.0 kWm standby\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine capacities:\u003c\/strong\u003e Oil 7.0 L, coolant 5.6 L\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlternator model:\u003c\/strong\u003e PL2B-3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlternator construction:\u003c\/strong\u003e 4 pole, insulation class H, temperature rise class H, IP23\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage regulation:\u003c\/strong\u003e ±0.5%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection class:\u003c\/strong\u003e IP54\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating conditions:\u003c\/strong\u003e Ambient -25 to 45°C, humidity below 80%, altitude below 1000 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRating test conditions:\u003c\/strong\u003e 25°C ambient, 100 m altitude, 30% relative humidity\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign standards:\u003c\/strong\u003e CE, ISO 8528-5:2005, AS 3000-2018, AS 3010-2017\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePart of the ABLE Power range at Gen4Sale.\u003c\/p\u003e","brand":"ABLE","offers":[{"title":"Default Title","offer_id":67546748223679,"sku":"PL50X3","price":14869.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/7409\/5295\/files\/ABLE-PL50X3-1.jpg?v=1791155380","url":"https:\/\/gen4sale.com.au\/products\/50kva-able-diesel-generator-pl50x3","provider":"Gen4Sale","version":"1.0","type":"link"}