{"product_id":"35kva-able-diesel-generator-pl35x1","title":"35kVA ABLE Diesel Generator PL35X1","description":"\u003cp\u003eThe PL35X1 is a 35kVA single phase diesel generator rated 35kVA (35kW) prime (PRP) and 38kVA (38kW) standby (ESP) at 240V, 50Hz and a power factor of 1.0. Its engine is a Xinchai 4D35ZD, a four cylinder, water-cooled diesel of 3.5 litres running at 1500 rpm, and it drives a four-pole brushless synchronous alternator with AVR. With 12 volt electric start and the battery included, the set also has an IP67-enclosed RCD and over current protection.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe engine is naturally aspirated with direct injection and a mechanical governor, so it has no turbocharger.\u003c\/li\u003e\n\u003cli\u003eThe alternator has 100% copper windings, class H insulation and IP23 protection, and it holds voltage within ±0.5%, so the output stays steady as loads change.\u003c\/li\u003e\n\u003cli\u003eA ComAp AMF controller with a two-wire remote start input lets a switch or external controller start the set.\u003c\/li\u003e\n\u003cli\u003eThe canopy is lockable and sound deadened, with a weather-resistant powder coat and stainless steel fittings.\u003c\/li\u003e\n\u003cli\u003eThree 15A outlets have an IP66 rating (dust tight and protected against powerful water jets), and hardwire terminals suit a fixed connection.\u003c\/li\u003e\n\u003cli\u003eMine site ready bunding is included in the specification to contain fuel spills.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAt about 10 litres an hour at prime load, a full 290 litre tank gives about 29 hours of running. Noise is 66.1 dB(A) at 7 m. Its design standards are CE, ISO 8528-5:2005, AS 3000-2018 and AS 3010-2017.\u003c\/p\u003e\n\u003ch3\u003eWhat it will run\u003c\/h3\u003e\n\u003cp\u003eAt 240V the PL35X1 has a rated current of about 145A, and at a power factor of 1.0 the kVA and kW figures are the same. It is a large single phase set, so frame the choice around the loads of the site rather than single appliances. Typically it suits a rural property on single phase supply, a large homestead, a single phase commercial building with refrigeration and air conditioning, or a workshop. Motors in pumps, compressors and air conditioners can draw several times their running current as they start, so allow headroom for the largest. Check each appliance's compliance plate for its running and starting power. An electrician should assess the site load before the set is specified, and connection to a switchboard or for home backup should be made through an inlet and changeover switch installed by a licensed electrician. Share your load list with us and we will help with sizing.\u003c\/p\u003e\n\u003cp\u003eThe PL35X1 suits farms, workshops, single phase commercial and light industrial premises and large homes. Having prime and standby ratings, it can stand in during a mains outage or supply a site that runs it regularly.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul style=\"list-style-position: outside; padding-left: 1.5em; margin-left: 0;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput:\u003c\/strong\u003e 35kVA (35kW) prime, 38kVA (38kW) standby @ 1.0PF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated current:\u003c\/strong\u003e 145 Amps (prime)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine:\u003c\/strong\u003e Xinchai 4D35ZD four-cylinder diesel, 1500rpm, water cooled\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlternator:\u003c\/strong\u003e Single phase 4-pole brushless synchronous alternator with AVR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController:\u003c\/strong\u003e ComAp AMF20, two-wire remote start\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStart type:\u003c\/strong\u003e 12 volt electric, battery included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhase \/ voltage:\u003c\/strong\u003e Single phase, 240V, 50Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel:\u003c\/strong\u003e Diesel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel tank:\u003c\/strong\u003e 290 L\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel use:\u003c\/strong\u003e 10 L\/hr at prime load\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRun time:\u003c\/strong\u003e 29 hrs continuous at prime load\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise level:\u003c\/strong\u003e 66.1 dB(A) @ 7m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlets:\u003c\/strong\u003e 3 x 15 Amp IP66 outlets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardwire terminals:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection:\u003c\/strong\u003e RCD to Australian Standards (IP67 enclosed), over current protection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCanopy:\u003c\/strong\u003e Lockable, sound deadened, weather-resistant powder coat, stainless steel fittings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMine spec:\u003c\/strong\u003e Mine site ready bunding\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (L x W x H):\u003c\/strong\u003e 210 x 95 x 152 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1,312 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 12 months or 1,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine configuration:\u003c\/strong\u003e 4 cylinder, 98 x 115 mm bore and stroke, 3.5 L, compression ratio 18.5, naturally aspirated, direct injection, mechanical governor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine output:\u003c\/strong\u003e 49.0 kWm prime, 54.0 kWm standby\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine capacities:\u003c\/strong\u003e Oil 7.0 L, coolant 5.6 L\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlternator model:\u003c\/strong\u003e PL2C-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlternator construction:\u003c\/strong\u003e 4 pole, 100% copper windings, 2\/3 winding pitch, insulation class H, IP23, shunt self-excitation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage regulation:\u003c\/strong\u003e ±0.5%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection class:\u003c\/strong\u003e IP54\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRating test conditions:\u003c\/strong\u003e 25°C ambient, 100 m altitude, 30% relative humidity\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign standards:\u003c\/strong\u003e CE, ISO 8528-5:2005, AS 3000-2018, AS 3010-2017\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePart of the ABLE Power range at Gen4Sale.\u003c\/p\u003e","brand":"ABLE","offers":[{"title":"Default Title","offer_id":67546748158143,"sku":"PL35X1","price":14869.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/7409\/5295\/files\/ABLE-PL35X1.jpg?v=1791155378","url":"https:\/\/gen4sale.com.au\/products\/35kva-able-diesel-generator-pl35x1","provider":"Gen4Sale","version":"1.0","type":"link"}