{"product_id":"30kva-able-diesel-generator-fs30x3","title":"30kVA ABLE Diesel Generator FS30X3","description":"\u003cp\u003eThe FS30X3 is a 30kVA three phase diesel generator rated 30kVA (24kW) prime (PRP) and 33kVA (26kW) standby (ESP) at 415V, 50Hz and a power factor of 0.8. It is powered by a FAWDE 4DW92-39D, a four-cylinder, turbocharged, water-cooled diesel running at 1500 rpm, and drives a four-pole brushless synchronous alternator with AVR. Electric start at 12 volts uses the included battery, and protection is an IP67-enclosed RCD plus over current protection.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe alternator has class H insulation and IP23 protection, and its AVR holds the output voltage steady as loads change.\u003c\/li\u003e\n\u003cli\u003eThe electric governor holds engine speed, and with it the 50Hz frequency, as loads come on and off.\u003c\/li\u003e\n\u003cli\u003eA charger keeps the 12 volt, 60 Ah battery topped up, and a lockable isolator lets it be disconnected and locked off.\u003c\/li\u003e\n\u003cli\u003eThe ComAp AMF20 controller has a two-wire remote start input, and an emergency stop is fitted.\u003c\/li\u003e\n\u003cli\u003eThe canopy is lockable, sound deadened, galvanised and powder coated, and the steel base frame has vibration isolators.\u003c\/li\u003e\n\u003cli\u003eOne 32A and one 20A three phase outlet and two 15A single phase outlets are rated IP66 (dust tight and protected against powerful water jets), with hardwire terminals for a fixed connection.\u003c\/li\u003e\n\u003cli\u003eThe 130 litre fuel tank is bunded, and the specification includes mine site ready bunding for sites that need fuel spills contained.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNoise is 63 dB(A) at 7 m. The engine is rated 29.0 kW prime and 32.0 kW standby. Ambient temperatures from -25°C to 50°C are specified, with a coolant heater needed below 5°C, along with humidity below 80% and altitude below 1000 m.\u003c\/p\u003e\n\u003ch3\u003eWhat it will run\u003c\/h3\u003e\n\u003cp\u003eAt 24kW prime the FS30X3 has a rated current of about 42A per phase. Typically it suits irrigation pumps, a grain dryer, a commercial kitchen, a workshop with machining equipment, or the essential loads of a small business park. Motors draw several times their running current as they start, so start the largest first, add the other loads in steps and keep the three phases balanced. Gather the running and starting power from each machine's compliance plate. Prime (PRP) allows unlimited annual hours on a variable load, with 10% overload for 1 hour in every 12. Standby (ESP) is for emergency use during mains outages, with no overload. Have an electrician assess the site load before you specify the set, and have a licensed electrician make the switchboard connection. Send us your load list and we can help with sizing.\u003c\/p\u003e\n\u003cp\u003eThe FS30X3 suits three phase sites with heavier loads: farms, commercial kitchens and clubs, workshops and small business parks. It can provide standby power in a mains outage or prime power on a variable load.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul style=\"list-style-position: outside; padding-left: 1.5em; margin-left: 0;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput:\u003c\/strong\u003e 30kVA (24kW) prime, 33kVA (26kW) standby @ 0.8PF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated current:\u003c\/strong\u003e 42 Amps per phase (prime)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine:\u003c\/strong\u003e FAWDE four-cylinder turbo diesel, 1500rpm, water cooled\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlternator:\u003c\/strong\u003e Three phase 4-pole brushless synchronous alternator with AVR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController:\u003c\/strong\u003e ComAp AMF20, two-wire remote start\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStart type:\u003c\/strong\u003e 12 volt electric, battery included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhase \/ voltage:\u003c\/strong\u003e Three phase, 415V, 50Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel:\u003c\/strong\u003e Diesel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel tank:\u003c\/strong\u003e 130 L\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel use:\u003c\/strong\u003e 6.5 L\/hr at prime load\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRun time:\u003c\/strong\u003e 20 hrs continuous at prime load\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise level:\u003c\/strong\u003e 63 dB(A) @ 7m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlets:\u003c\/strong\u003e 1 x 32 Amp and 1 x 20 Amp three phase and 2 x 15 Amp single phase IP66 outlets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardwire terminals:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection:\u003c\/strong\u003e RCD to Australian Standards (IP67 enclosed), over current protection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCanopy:\u003c\/strong\u003e Lockable, sound deadened, weather-resistant powder coat, stainless steel fittings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMine spec:\u003c\/strong\u003e Mine site ready bunding\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (L x W x H):\u003c\/strong\u003e 185 x 76 x 118 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 850 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 12 months or 1,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrime (PRP) availability:\u003c\/strong\u003e Unlimited annual hours on a variable load, 10% overload for 1 hour in every 12\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandby (ESP) use:\u003c\/strong\u003e Emergency use during mains outages, no overload, no parallel operation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine model:\u003c\/strong\u003e FAWDE 4DW92-39D\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine configuration:\u003c\/strong\u003e 4 cylinder, 90 x 100 mm bore and stroke, 2.54 L, compression ratio 17.0:1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine output:\u003c\/strong\u003e 29.0 kW prime, 32.0 kW standby\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine capacities:\u003c\/strong\u003e Oil 8.0 L, coolant 8.0 L\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlternator construction:\u003c\/strong\u003e 184G frame, 4 pole, insulation class H, IP23\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGovernor and excitation:\u003c\/strong\u003e Electric governor, self-excited shunt excitation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery and charger:\u003c\/strong\u003e 12 V 60 Ah battery with charger and lockable battery isolator\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOther fitted features:\u003c\/strong\u003e Emergency stop, galvanised and powder-coated canopy, 50°C radiator, steel base frame with vibration isolators, bunded 130 L fuel tank\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating conditions:\u003c\/strong\u003e Ambient -25 to 50°C (coolant heater needed below 5°C), humidity below 80%, altitude below 1000 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards:\u003c\/strong\u003e CE certification, ISO 8528-5:2005, GB\/T 2820.5-2009, ISO 3046\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePart of the ABLE Power range at Gen4Sale.\u003c\/p\u003e","brand":"ABLE","offers":[{"title":"Default Title","offer_id":67546748125375,"sku":"FS30X3","price":10678.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/7409\/5295\/files\/ABLE-FS30X3.jpg?v=1791155377","url":"https:\/\/gen4sale.com.au\/products\/30kva-able-diesel-generator-fs30x3","provider":"Gen4Sale","version":"1.0","type":"link"}