{"product_id":"11kva-able-diesel-generator-pl11d3","title":"11kVA ABLE Diesel Generator PL11D3","description":"\u003cp\u003eThe PL11D3 is an 11kVA three phase diesel generator rated 11kVA (9kW) prime (PRP) and 11.4kVA (9.4kW) standby (ESP) at 415V, 50Hz and a power factor of 0.8. Power comes from a YangDong YD385D three cylinder diesel, water cooled and turning at 1500 rpm, which drives a four-pole brushless alternator with AVR. It starts electrically at 12 volts with the battery included, and protection is an IP67-enclosed RCD plus over current protection.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe YD385D is naturally aspirated with direct injection and a mechanical governor, so there is no turbocharger to look after.\u003c\/li\u003e\n\u003cli\u003eThe alternator has 100% copper windings, class H insulation and IP23 protection, with voltage regulation of ±0.5%, so the output stays steady as loads come on and off.\u003c\/li\u003e\n\u003cli\u003eA ComAp AMF controller with a two-wire remote start input lets an external switch or controller start the set.\u003c\/li\u003e\n\u003cli\u003eThe fuel tank is built into the base frame, so there is no separate tank to connect.\u003c\/li\u003e\n\u003cli\u003eThe canopy is lockable and sound deadened, with a weather-resistant powder coat and stainless steel fittings.\u003c\/li\u003e\n\u003cli\u003eSound-absorbing cotton and vibration isolators are part of the build, which limits noise and vibration.\u003c\/li\u003e\n\u003cli\u003eAmbient temperatures from -25°C to 45°C are specified (a coolant heater is needed below 5°C), along with humidity below 80% and altitude below 1000 m.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe tank holds 70 litres and noise is 65 dB(A) at 7 m. Outlets are 3 x 15A single phase and 1 x 20A three phase (IP66), with hardwire terminals for a fixed connection. Its design standards are CE, ISO 8528-5:2005, AS 3000-2018 and AS 3010-2017.\u003c\/p\u003e\n\u003ch3\u003eWhat it will run\u003c\/h3\u003e\n\u003cp\u003eThe PL11D3 is a small three phase set. Typically it suits a bore or irrigation pump, a cool room, a packing facility or a workshop with a few machines. Start the largest motor first and add other loads afterwards, because motors draw several times their running current as they start. Check each machine's compliance plate for running and starting power, and spread the load across the three phases. Prime (PRP) allows unlimited annual hours on a variable load with an average load factor below 70% and 10% overload for 1 hour in every 12. Standby (ESP) is limited to 500 hours a year, with an average load factor below 80% and no overload. Before specifying the set, have an electrician assess the site load; a licensed electrician should then connect it to the switchboard. Send us your load list and we will help you pick the right size.\u003c\/p\u003e\n\u003cp\u003eThe PL11D3 suits farms, packing facilities, workshops and small commercial or industrial premises, as standby during a mains outage or as prime power on a site with a variable load.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul style=\"list-style-position: outside; padding-left: 1.5em; margin-left: 0;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput:\u003c\/strong\u003e 11kVA (9kW) prime, 11.4kVA (9.4kW) standby @ 0.8PF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated current:\u003c\/strong\u003e 16 Amps per phase (prime)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine:\u003c\/strong\u003e YangDong YD385D three-cylinder diesel, 1500rpm, water cooled\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlternator:\u003c\/strong\u003e Three phase 4-pole brushless synchronous alternator with AVR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController:\u003c\/strong\u003e ComAp AMF20, two-wire remote start\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStart type:\u003c\/strong\u003e 12 volt electric, battery included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhase \/ voltage:\u003c\/strong\u003e Three phase, 415V, 50Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel:\u003c\/strong\u003e Diesel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel tank:\u003c\/strong\u003e 70 L\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel use:\u003c\/strong\u003e 2.2 L\/hr at prime load\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRun time:\u003c\/strong\u003e 31 hrs continuous at prime load\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise level:\u003c\/strong\u003e 65 dB(A) @ 7m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlets:\u003c\/strong\u003e 3 x 15 Amp single phase and 1 x 20 Amp three phase IP66 outlets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardwire terminals:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection:\u003c\/strong\u003e RCD to Australian Standards (IP67 enclosed), over current protection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCanopy:\u003c\/strong\u003e Lockable, sound deadened, weather-resistant powder coat, stainless steel fittings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (L x W x H):\u003c\/strong\u003e 141 x 73 x 111 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 724 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 12 months or 1,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrime (PRP) limits:\u003c\/strong\u003e Variable load, unlimited annual hours, average load factor below 70% per 24 hours, 10% overload for 1 hour in every 12\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandby (ESP) limits:\u003c\/strong\u003e 500 hours a year, up to 300 hours at a time, average load factor below 80% per 24 hours, no overload\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine configuration:\u003c\/strong\u003e 3 cylinder, 85 x 90 mm bore and stroke, 1.532 L, compression ratio 18, naturally aspirated, direct injection, mechanical governor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine output:\u003c\/strong\u003e 11.0 kWm prime, 12.1 kWm standby\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine capacities:\u003c\/strong\u003e Oil 4.5 L, coolant 3.5 L\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlternator model:\u003c\/strong\u003e PL1E-3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlternator construction:\u003c\/strong\u003e 4 pole, 100% copper windings, 2\/3 winding pitch, insulation class H, IP23, shunt self-excitation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage regulation:\u003c\/strong\u003e ±0.5%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection class:\u003c\/strong\u003e IP54\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating conditions:\u003c\/strong\u003e Ambient -25 to 45°C (coolant heater needed below 5°C), humidity below 80%, altitude below 1000 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRating test conditions:\u003c\/strong\u003e 25°C ambient, 100 m altitude, 30% relative humidity\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign standards:\u003c\/strong\u003e CE, ISO 8528-5:2005, AS 3000-2018, AS 3010-2017\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePart of the ABLE Power range at Gen4Sale.\u003c\/p\u003e","brand":"ABLE","offers":[{"title":"Default Title","offer_id":67546745536703,"sku":"PL11D3","price":7778.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/7409\/5295\/files\/ABLE-PL11D3.jpg?v=1791155218","url":"https:\/\/gen4sale.com.au\/products\/11kva-able-diesel-generator-pl11d3","provider":"Gen4Sale","version":"1.0","type":"link"}