{"title":"Genelite","description":"\u003cp\u003eGenelite has been building and backing generators in Australia for decades, and their range forms the backbone of our catalogue. It runs from Honda-powered petrol worksite units through silenced diesels to fully engineered standby sets, transfer switch panels and load banks, all specced for Australian conditions and supported with parts and service nationwide. Built in Queensland and delivered Australia-wide: if you are weighing up two models, \u003ca href=\"\/pages\/customer-support\"\u003eask us\u003c\/a\u003e and we will talk you through the differences before you spend a dollar.\u003c\/p\u003e","products":[{"product_id":"genelite-gatsi40100-automatic-transfer-switch","title":"Genelite GATSI40100 Automatic Transfer Switch","description":"\u003cp\u003eThe Genelite GATSI40100 is a 100A, three phase automatic transfer switch for auto-start generators from 44 to 66kVA. An automatic transfer switch moves a site's supply between the mains and a generator without anyone at the switchboard, and the GATSI40100 is run by an ATS-I controller.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe ATS-I controller has a graphical display and alarms, giving a clear view of what the switch is doing.\u003c\/li\u003e\n\u003cli\u003eThe IP55 rated steel enclosure protects the internal components from dust and water jets.\u003c\/li\u003e\n\u003cli\u003eThe switch carries a 2 year warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhere it fits\u003c\/h3\u003e\n\u003cp\u003eThe GATSI40100 suits three phase sites with an auto-start generator rated from 44 to 66kVA. A licensed electrician must install it and connect it to the generator and the site's switchboard, and they can confirm that the rating suits your generator and your site's load before you buy. If your generator is single phase, or falls outside 44 to 66kVA, send us its model and we will help you find the right switch.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRating:\u003c\/strong\u003e 100A, three phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuits:\u003c\/strong\u003e Auto-start three phase generators, 44 to 66kVA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController:\u003c\/strong\u003e ATS-I with graphical display and alarms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e IP55 rated steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (L x W x H):\u003c\/strong\u003e 50 x 40 x 20 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 2 years\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSupplied through Genelite and supported Australia-wide by Gen4Sale, an Authorised Genelite Master Dealer.\u003c\/p\u003e","brand":"Genelite","offers":[{"title":"Default Title","offer_id":46133309276351,"sku":"GATSI40100","price":1739.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/7409\/5295\/files\/DB-Board-png-1200x1200-1-1_a6a16c63-e766-41ff-bbcc-436a06148d80.png?v=1788503504"},{"product_id":"genelite-gatsi40160-automatic-transfer-switch","title":"Genelite GATSI40160 Automatic Transfer Switch","description":"\u003cp\u003eThe Genelite GATSI40160 is a 160A, three phase automatic transfer switch with motorised changeover, for auto-start three phase generators up to 111kVA. An automatic transfer switch joins the mains, a generator and a site's switchboard: when the mains fails it signals the generator to start and moves the load across, then transfers back once the mains returns.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eA 160A three phase rating with motorised changeover: a motor drives the switching between mains and generator, so the transfer needs no one at the switchboard.\u003c\/li\u003e\n\u003cli\u003eIt is sized for auto-start three phase generators up to 111kVA, which makes it straightforward to match to the generator.\u003c\/li\u003e\n\u003cli\u003eThe ATS-I controller has a graphical display and alarms, so you can see what the switch is doing and be alerted when something needs attention.\u003c\/li\u003e\n\u003cli\u003eThe steel enclosure is IP55 rated, meaning it is protected against dust ingress and against water jets from any direction.\u003c\/li\u003e\n\u003cli\u003eThe switch carries a 2 year warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhere it fits\u003c\/h3\u003e\n\u003cp\u003eThe GATSI40160 suits three phase installations backed by an auto-start generator up to 111kVA. Match a transfer switch to its generator by phase and kVA, not by amp rating alone, and have a licensed electrician install it between the mains, the generator and the switchboard. Send us your generator's make and model and we will help you check the match.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRating:\u003c\/strong\u003e 160A, three phase, motorised changeover\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuits:\u003c\/strong\u003e Auto-start three phase generators up to 111kVA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController:\u003c\/strong\u003e ATS-I with graphical display and alarms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e IP55 rated steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (L x W x H):\u003c\/strong\u003e 75 x 50 x 25 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 2 years\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSupplied through Genelite and supported Australia-wide by Gen4Sale, an Authorised Genelite Master Dealer.\u003c\/p\u003e","brand":"Genelite","offers":[{"title":"Default Title","offer_id":46133309309119,"sku":"GATSI40160","price":2669.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/7409\/5295\/files\/DB-Board-png-1200x1200-1-1.png?v=1788503504"},{"product_id":"genelite-gt20628-3-automatic-transfer-switch","title":"Genelite GT20628-3 Automatic Transfer Switch","description":"\u003cp\u003eThe Genelite GT20628-3 is a three phase automatic transfer switch rated 40A at 415V, for auto-start three phase generators from 5 to 22kVA. It moves a site's load between the mains and the generator, switching to generator power when the mains fails.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRated 40A at 415V, it matches auto-start three phase generators from 5 to 22kVA.\u003c\/li\u003e\n\u003cli\u003eIts control circuits run from a 12V DC supply, which your electrician can confirm against the generator's control system.\u003c\/li\u003e\n\u003cli\u003eA powder coated steel case gives the switchgear a metal enclosure with a protective coating.\u003c\/li\u003e\n\u003cli\u003eThe switch carries a 2 year warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhere it fits\u003c\/h3\u003e\n\u003cp\u003eThe GT20628-3 suits three phase sites with an auto-start generator from 5 to 22kVA. Transfer switches are matched to the generator by phase and kVA band, and a licensed electrician should connect this one to the generator and the switchboard. Send us the generator model if you want help confirming the match.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRating:\u003c\/strong\u003e 40A @ 415V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuits:\u003c\/strong\u003e Auto-start three phase generators, 5 to 22kVA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl supply:\u003c\/strong\u003e 12V DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Powder coated steel case\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (L x W x H):\u003c\/strong\u003e 42 x 27.5 x 18 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 2 years\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSupplied through Genelite and supported Australia-wide by Gen4Sale, an Authorised Genelite Master Dealer.\u003c\/p\u003e","brand":"Genelite","offers":[{"title":"Default Title","offer_id":46133311209663,"sku":"GT20628-3","price":939.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/7409\/5295\/files\/ATS-trans-1200x1200-1.png?v=1788503504"},{"product_id":"genelite-gt20642-3-automatic-transfer-switch","title":"Genelite GT20642-3 Automatic Transfer Switch","description":"\u003cp\u003eThe Genelite GT20642-3 is a three phase automatic transfer switch rated 60A at 415V, for auto-start three phase generators from 23 to 43kVA. It takes the site's load from the mains to the generator when the mains fails, and back again when the mains returns.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRated 60A at 415V, it is matched to auto-start three phase generators from 23 to 43kVA.\u003c\/li\u003e\n\u003cli\u003eA 12V DC control supply powers the switch's control circuits, which your electrician can confirm against the generator.\u003c\/li\u003e\n\u003cli\u003eThe powder coated steel case provides a metal enclosure with a protective finish.\u003c\/li\u003e\n\u003cli\u003eThe switch comes with a 2 year warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhere it fits\u003c\/h3\u003e\n\u003cp\u003eThe GT20642-3 suits three phase sites with an auto-start generator from 23 to 43kVA. The switch needs to match the generator's phase and kVA band, and installation into the switchboard is work for a licensed electrician. Send us the generator model and we will help you confirm it fits.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRating:\u003c\/strong\u003e 60A @ 415V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuits:\u003c\/strong\u003e Auto-start three phase generators, 23 to 43kVA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl supply:\u003c\/strong\u003e 12V DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Powder coated steel case\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (L x W x H):\u003c\/strong\u003e 42 x 27.5 x 18 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 2 years\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSupplied through Genelite and supported Australia-wide by Gen4Sale, an Authorised Genelite Master Dealer.\u003c\/p\u003e","brand":"Genelite","offers":[{"title":"Default Title","offer_id":46133311242431,"sku":"GT20642-3","price":1189.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/7409\/5295\/files\/ATS-trans-1200x1200-1_e6176e2a-ce59-404f-a5b9-2c559210fa34.webp?v=1788491542"},{"product_id":"1000fc","title":"1,000 Litre Genelite Fuel Cell","description":"\u003cp\u003eThe Genelite 1,000 Litre Fuel Cell, model 1000FC, is a bulk fuel storage tank with a capacity of 1,000 litres.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eA 1,000 litre capacity lets you hold fuel on site in bulk, so you refill less often than with small containers.\u003c\/li\u003e\n\u003cli\u003eThe capacity makes run time easy to estimate: divide 1,000 litres by your equipment's fuel consumption in litres per hour for an approximate run time from a full tank.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhere it fits\u003c\/h3\u003e\n\u003cp\u003eA 1,000 litre tank suits on-site bulk fuel storage, for example to supply a generator or other fuel-using equipment between refills. Bulk fuel storage can be subject to local rules on location and installation, so check the requirements for your site first. Include the fuel type and your site details when you request a quote.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrice on application.\u003c\/strong\u003e Each fuel cell is quoted individually so the configuration can be matched to your site. Use Add to Quote on this page and we will come back to you with a price.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul style=\"list-style-position: outside; padding-left: 1.5em; margin-left: 0;\"\u003e\n\u003cli\u003e1000 litre capacity for this specific listing\u003c\/li\u003e\n\u003cli\u003ePrice on application\u003c\/li\u003e\n\u003cli\u003eNot available for online purchase\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSupplied through Genelite and supported Australia-wide by Gen4Sale, an Authorised Genelite Master Dealer.\u003c\/p\u003e","brand":"Genelite","offers":[{"title":"Default Title","offer_id":46168923439295,"sku":"1000FC","price":0.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/7409\/5295\/files\/1000-litre-trans-genecube-1200x1200-1.png?v=1788916827"},{"product_id":"2500fc","title":"2,500 Litre Genelite Fuel Cell","description":"\u003cp\u003eThe Genelite 2,500 Litre Fuel Cell, model 2500FC, is a fuel storage tank with a 2,500 litre capacity for holding fuel in bulk.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eA 2,500 litre capacity stores fuel on site in volume, which cuts down how often you need to arrange refills.\u003c\/li\u003e\n\u003cli\u003eDivide 2,500 litres by your generator's fuel consumption in litres per hour to get an approximate run time from a full tank.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhere it fits\u003c\/h3\u003e\n\u003cp\u003eThe 2,500 litre size suits on-site storage for generators and plant that run for long periods between refills. Fuel storage can be subject to local rules on location and installation, so check the requirements for your site before installing a tank. When you request a quote, include the fuel type and where the tank will go.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrice on application.\u003c\/strong\u003e Fuel cells are quoted individually so the configuration can suit your site. Use Add to Quote on this page and we will come back to you with a price.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul style=\"list-style-position: outside; padding-left: 1.5em; margin-left: 0;\"\u003e\n\u003cli\u003e2500 litre capacity fuel cell\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSupplied through Genelite and supported Australia-wide by Gen4Sale, an Authorised Genelite Master Dealer.\u003c\/p\u003e","brand":"Genelite","offers":[{"title":"Default Title","offer_id":46168923504831,"sku":"2500FC","price":0.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/7409\/5295\/files\/2500l-fuel-cell-with-Genecube-logo.png?v=1788916826"},{"product_id":"4500fc","title":"4,500 Litre Genelite Fuel Cell","description":"\u003cp\u003eThe Genelite 4,500 Litre Fuel Cell, model 4500FC, holds 4,500 litres of fuel in a single bulk storage tank.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eA 4,500 litre capacity keeps a large reserve of fuel on site, so refills are needed less often.\u003c\/li\u003e\n\u003cli\u003eRun time is simple to estimate: 4,500 litres divided by the fuel consumption of your equipment in litres per hour gives an approximate figure for a full tank.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhere it fits\u003c\/h3\u003e\n\u003cp\u003eThe 4,500 litre capacity suits generators and other equipment that need a substantial fuel store on site. Fuel storage can be subject to local rules on location and installation, so check what applies at your site. Include the fuel type and your site details with your quote request so the configuration can be matched.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrice on application.\u003c\/strong\u003e Each fuel cell is quoted to suit your site and intended use. Use Add to Quote on this page and we will come back to you with a price.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul style=\"list-style-position: outside; padding-left: 1.5em; margin-left: 0;\"\u003e\n\u003cli\u003e4500 litre capacity fuel cell\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSupplied through Genelite and supported Australia-wide by Gen4Sale, an Authorised Genelite Master Dealer.\u003c\/p\u003e","brand":"Genelite","offers":[{"title":"Default Title","offer_id":46168923570367,"sku":"4500FC","price":0.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/7409\/5295\/files\/4500-litre-with-genecube-logo.png?v=1788916829"},{"product_id":"6000fc","title":"6,000 Litre Genelite Fuel Cell","description":"\u003cp\u003eModel 6000FC is a Genelite fuel cell with a capacity of 6,000 litres, a bulk tank for storing fuel on site.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eA 6,000 litre capacity suits sites that use fuel regularly, giving a large store to draw on between refills.\u003c\/li\u003e\n\u003cli\u003eDivide 6,000 litres by your generator's or machine's hourly fuel consumption for an approximate run time from a full tank.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhere it fits\u003c\/h3\u003e\n\u003cp\u003eA 6,000 litre fuel cell suits on-site bulk storage for generators, plant and other fuel-using equipment. Local rules on the location and installation of fuel storage can apply, so check the requirements for your site first. Send the fuel type and site details with your quote request.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrice on application.\u003c\/strong\u003e Quotes are prepared individually so the configuration can be matched to your site. Use Add to Quote on this page and we will come back to you with a price.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul style=\"list-style-position: outside; padding-left: 1.5em; margin-left: 0;\"\u003e\n\u003cli\u003e6000 litre capacity fuel cell\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSupplied through Genelite and supported Australia-wide by Gen4Sale, an Authorised Genelite Master Dealer.\u003c\/p\u003e","brand":"Genelite","offers":[{"title":"Default Title","offer_id":46168923603135,"sku":"6000FC","price":0.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/7409\/5295\/files\/6500-litre-fuel-tanks-2-1200x1200-1.png?v=1788916829"},{"product_id":"10000fc","title":"10,000 Litre Genelite Fuel Cell","description":"\u003cp\u003eThe Genelite 10,000 Litre Fuel Cell, model 10000FC, is a bulk fuel storage tank with a capacity of 10,000 litres.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eA 10,000 litre capacity holds a large volume of fuel on site, so equipment that uses fuel steadily needs few refills.\u003c\/li\u003e\n\u003cli\u003eTo estimate how long a full tank would last, divide 10,000 litres by the fuel consumption of your generator or machinery in litres per hour.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhere it fits\u003c\/h3\u003e\n\u003cp\u003eA tank of this capacity suits sites that store fuel in volume, for example to supply a large generator or several machines from one tank. Storage at this scale can be subject to local rules on location and installation, so check the requirements for your site first. Tell us the fuel type and your site details when you request a quote.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrice on application.\u003c\/strong\u003e A tank this size is quoted to suit your site and how you plan to use it. Use Add to Quote on this page and we will come back to you with a price.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul style=\"list-style-position: outside; padding-left: 1.5em; margin-left: 0;\"\u003e\n\u003cli\u003ePrice is quote-only (POA)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSupplied through Genelite and supported Australia-wide by Gen4Sale, an Authorised Genelite Master Dealer.\u003c\/p\u003e","brand":"Genelite","offers":[{"title":"Default Title","offer_id":46168923668671,"sku":"10000FC","price":0.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/7409\/5295\/files\/10000-litre-fuel-cell-with-genecube-logo-500x500-1.png?v=1788916833"},{"product_id":"20000fc","title":"20,000 Litre Genelite Fuel Cell","description":"\u003cp\u003eThe Genelite 20,000 Litre Fuel Cell, model 20000FC, is a bulk fuel storage tank with a capacity of 20,000 litres.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eA 20,000 litre capacity stores a very large volume of fuel on site, so refills can be spaced well apart for equipment with steady fuel use.\u003c\/li\u003e\n\u003cli\u003eDivide 20,000 litres by the hourly fuel consumption of the equipment it feeds to get an approximate run time from a full tank.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhere it fits\u003c\/h3\u003e\n\u003cp\u003eA 20,000 litre tank suits large sites and high fuel use, for example several generators or a group of machines fed from one store. Storage at this scale can be subject to local rules on location, installation and approvals, so check the requirements for your site before installation. Tell us the fuel type and your site details when you request a quote.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrice on application.\u003c\/strong\u003e A tank this size is quoted individually so the configuration can be matched to your site. Use Add to Quote on this page and we will come back to you with a price.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul style=\"list-style-position: outside; padding-left: 1.5em; margin-left: 0;\"\u003e\n\u003cli\u003eProduct photo indicative only\u003c\/li\u003e\n\u003cli\u003ePrice is quote-only (POA)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSupplied through Genelite and supported Australia-wide by Gen4Sale, an Authorised Genelite Master Dealer.\u003c\/p\u003e","brand":"Genelite","offers":[{"title":"Default Title","offer_id":46168923701439,"sku":"20000FC","price":0.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/7409\/5295\/files\/10000-litre-fuel-cell-with-genecube-logo.png?v=1788916835"},{"product_id":"glb-15-kw","title":"15kW Genelite Load Bank GLB-15","description":"\u003cp\u003eThe Genelite GLB-15 kW is an automatic dummy load bank with a resistive load, rated for continuous duty from 0 to 15 kW. It operates at 415V and 50Hz or 60Hz with a power factor of 1, and connections are made at one M12 terminal per phase.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eA smart control panel automatically keeps a connected generator at an optimum operating load, which helps prevent wet stacking and cylinder glazing.\u003c\/li\u003e\n\u003cli\u003eSeven load steps of 1, 1, 2, 2, 2, 2 and 5 kW add up to the full 15 kW, so load can be built up in small increments.\u003c\/li\u003e\n\u003cli\u003eA 7 inch HMI instrument display gives the operator a dedicated interface.\u003c\/li\u003e\n\u003cli\u003eThe rugged design is rated to operate in ambient temperatures up to 50°C.\u003c\/li\u003e\n\u003cli\u003eIt can be permanently installed indoors or outdoors.\u003c\/li\u003e\n\u003cli\u003eA galvanised steel canopy, galvanised skid base and stainless steel elements make for a rugged build.\u003c\/li\u003e\n\u003cli\u003eTop lift and fork pockets are built in for moving the unit with lifting equipment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAirflow is 1 cubic metre per second.\u003c\/p\u003e\n\u003ch3\u003eWhat it is for\u003c\/h3\u003e\n\u003cp\u003eA load bank puts a known electrical load on a generator. The GLB-15 kW suits generator applications that need a minimum load maintained and on-site testing. Typical sectors include mining camps, data centres, commercial buildings, telecommunications, essential services, defence and pump stations. Choose the load bank to suit the generator it will load: this one covers 0 to 15 kW. Send us the generator model and we will help you check the fit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrice on application.\u003c\/strong\u003e This load bank is quoted to suit your configuration, options and site. Use Add to Quote on this page and we will come back to you with a price.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul style=\"list-style-position: outside; padding-left: 1.5em; margin-left: 0;\"\u003e\n\u003cli\u003eAutomatic operation, resistive load type\u003c\/li\u003e\n\u003cli\u003eRated 0-15 kW, continuous duty\u003c\/li\u003e\n\u003cli\u003e415V rated voltage, 50Hz\/60Hz rated frequency, power factor 1\u003c\/li\u003e\n\u003cli\u003eSmart control panel keeps generators at optimum load\u003c\/li\u003e\n\u003cli\u003eHelps prevent wet stacking and cylinder glazing\u003c\/li\u003e\n\u003cli\u003eRugged design rated to operate up to 50°C ambient\u003c\/li\u003e\n\u003cli\u003eSuitable for indoor or outdoor permanent installation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 560 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (L x W x H):\u003c\/strong\u003e 146 x 116 x 128.7 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e GLB-15 kW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad steps:\u003c\/strong\u003e 1 \/ 1 \/ 2 \/ 2 \/ 2 \/ 2 \/ 5 kW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminals per phase:\u003c\/strong\u003e 1 x M12\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAirflow:\u003c\/strong\u003e 1 m3\/s\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSound level:\u003c\/strong\u003e 85 dBA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplay:\u003c\/strong\u003e 7 inch HMI instrument display\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Galvanised steel canopy, galvanised skid base, stainless steel elements\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandling:\u003c\/strong\u003e Top lift with fork pockets\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSupplied through Genelite and supported Australia-wide by Gen4Sale, an Authorised Genelite Master Dealer.\u003c\/p\u003e","brand":"Genelite","offers":[{"title":"Default Title","offer_id":46168923996351,"sku":"GLB-15","price":0.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/7409\/5295\/files\/15-180kW-auto-load-bank.jpg?v=1788916855"},{"product_id":"bes20s","title":"20kVA Genelite Hybrid Energy System BES20S","description":"\u003cp\u003eThe BES20S is a 20kVA hybrid energy system that integrates solar panels, battery storage and a diesel generator. It uses a LiFePO4 air-cooled battery pack, with an AC\/DC power conversion system and a smart energy management system linking the sources.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSolar panels, battery storage and a diesel generator are integrated in one system, so a site works with a single hybrid system rather than three separate ones.\u003c\/li\u003e\n\u003cli\u003eAC\/DC power conversion is what lets DC sources such as the battery and solar panels supply AC loads, and the smart energy management system sits alongside it to link the sources.\u003c\/li\u003e\n\u003cli\u003eThe battery is a LiFePO4 (lithium iron phosphate) pack and it is air cooled.\u003c\/li\u003e\n\u003cli\u003eAn RCD leakage protector cuts the supply on earth leakage.\u003c\/li\u003e\n\u003cli\u003eA plug-and-play interface is provided for connection.\u003c\/li\u003e\n\u003cli\u003eThe fuel tank is large capacity and leak-proof.\u003c\/li\u003e\n\u003cli\u003eA fire safety system is built in.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat it will run\u003c\/h3\u003e\n\u003cp\u003eThe 20kVA rating is the largest load the system is rated to supply at one time. Add up the loads that will run together and compare the total with it, then allow for the starting surge of motors, which draw a surge well above their running current as they start. Connection to a site's wiring should go through a licensed electrician. Send us your load list and site details and we will help check the sizing.\u003c\/p\u003e\n\u003cp\u003eThe BES20S suits commercial sites that want solar, battery storage and a generator working together, including as backup power.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrice on application.\u003c\/strong\u003e We quote each system to the site and the options it needs. Use Add to Quote on this page and we will come back to you with a price.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul style=\"list-style-position: outside; padding-left: 1.5em; margin-left: 0;\"\u003e\n\u003cli\u003eIntegrates solar panels, battery storage and diesel generator\u003c\/li\u003e\n\u003cli\u003eSmart energy management system\u003c\/li\u003e\n\u003cli\u003eAC\/DC power conversion system\u003c\/li\u003e\n\u003cli\u003eLiFePO4 air-cooled battery pack\u003c\/li\u003e\n\u003cli\u003eRCD leakage protector\u003c\/li\u003e\n\u003cli\u003ePlug-and-play interface\u003c\/li\u003e\n\u003cli\u003eLeak-proof, large-capacity fuel tank\u003c\/li\u003e\n\u003cli\u003eFire safety system\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSupplied through Genelite and supported Australia-wide by Gen4Sale, an Authorised Genelite Master Dealer.\u003c\/p\u003e","brand":"Genelite","offers":[{"title":"Default Title","offer_id":46168924061887,"sku":"BES20S","price":0.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/7409\/5295\/files\/BES14S-50S3-1_5b023d6d-19f8-4377-802a-63738edfdebb.png?v=1788916865"},{"product_id":"22kva-17-6kw-gkd20s-defence","title":"22kVA (17.6kW) Genelite Defence Diesel Generator GKD20S","description":"\u003cp\u003eThe GKD20S is a Genelite Defence diesel generator rated at 22 kVA (17.6 kW).\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul style=\"list-style-position: outside; padding-left: 1.5em; margin-left: 0;\"\u003e\n\u003cli\u003eThe set is custom-built for military and defence use.\u003c\/li\u003e\n\u003cli\u003eA Kubota diesel engine drives the set.\u003c\/li\u003e\n\u003cli\u003eBuilt-in diagnostics and prognostics give maintenance crews a view of the set's condition and help with planning servicing.\u003c\/li\u003e\n\u003cli\u003eSimple maintenance is a design aim, which keeps servicing straightforward in the field.\u003c\/li\u003e\n\u003cli\u003eFluids are filled and the set is load and function tested, so it is ready to run once fuel is added.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat it will run\u003c\/h3\u003e\n\u003cp\u003eAt 17.6 kW (22 kVA) the GKD20S typically suits the essential loads of a field facility, workshop or camp: lighting, refrigeration, pumps and tools. The 17.6 kW figure is the real power available to loads, which is 0.8 of the 22 kVA figure. Confirm the phase and voltage with us when you request a quote. Motors draw several times their running current at start, so allow headroom for your largest motor. Check each machine's compliance plate for its current. Connection to a building's wiring must go through a changeover switch installed by a licensed electrician. Send us your load list and we will help you size the set.\u003c\/p\u003e\n\u003cp\u003eThe GKD20S is made for defence customers and suits military facilities, field camps and training areas, as well as remote commercial sites that need a diesel set of this size.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrice on application.\u003c\/strong\u003e This set is quoted to your configuration, any extras and the installation site. Use Add to Quote on this page and we will come back to you with a price.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul style=\"list-style-position: outside; padding-left: 1.5em; margin-left: 0;\"\u003e\n\u003cli\u003e22 kVA \/ 17.6 kW diesel generator custom-built for military\/defence use\u003c\/li\u003e\n\u003cli\u003ePowered by a Kubota diesel engine\u003c\/li\u003e\n\u003cli\u003eLow noise signature\u003c\/li\u003e\n\u003cli\u003eBattlefield mobility\u003c\/li\u003e\n\u003cli\u003eBuilt-in diagnostics\/prognostics\u003c\/li\u003e\n\u003cli\u003eSimple maintenance\u003c\/li\u003e\n\u003cli\u003eSupplied with fluids, load \u0026amp; function tested, ready to run\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSupplied through Genelite and supported Australia-wide by Gen4Sale, an Authorised Genelite Master Dealer.\u003c\/p\u003e","brand":"Genelite","offers":[{"title":"Default Title","offer_id":46168924094655,"sku":"GKD20S","price":0.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/7409\/5295\/files\/PE-Generator-SQ3200B-Au-B-02-png-1200x1200-1.png?v=1788916866"},{"product_id":"glb-25-kw","title":"25kW Genelite Load Bank GLB-25","description":"\u003cp\u003eThe GLB-25 is an automatic resistive load bank with a 0 to 25 kW load range at 415 V, 50 or 60 Hz and unity power factor. It is rated for continuous duty, has an outdoor enclosure, and can be installed permanently indoors or outdoors.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eA smart control panel holds the connected generator at an optimum load automatically, which helps prevent wet stacking and cylinder glazing.\u003c\/li\u003e\n\u003cli\u003eSeven load steps, from 1 kW to 5 kW, let you load a generator in fine increments up to 25 kW.\u003c\/li\u003e\n\u003cli\u003eRated for ambient temperatures up to 50°C and designed for Australian conditions.\u003c\/li\u003e\n\u003cli\u003eA galvanised steel canopy and skid base with stainless steel elements suit permanent installation.\u003c\/li\u003e\n\u003cli\u003eFork pockets and a top lift are built in for positioning the unit on site.\u003c\/li\u003e\n\u003cli\u003eA 7-inch HMI instrument display sits at the control panel.\u003c\/li\u003e\n\u003cli\u003eLoad cables land on one M12 terminal per phase.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat it is for\u003c\/h3\u003e\n\u003cp\u003eA diesel generator that spends long periods on a light load can develop wet stacking, where unburnt fuel and carbon build up in the exhaust, and cylinder glazing. The GLB-25 is used to maintain a minimum load on a generator and for on-site testing, and it is aimed at mining camps, data centres, commercial buildings, telecommunications, essential services, defence and pump stations. Choose a rating that matches the generator's kW output (kVA multiplied by power factor), and send us the make, model and rating of your set if you want help with sizing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrice on application.\u003c\/strong\u003e Load banks are quoted to the configuration and the site. Use Add to Quote on this page and we will come back to you with a price.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul style=\"list-style-position: outside; padding-left: 1.5em; margin-left: 0;\"\u003e\n\u003cli\u003e25 kW automatic resistive load bank\u003c\/li\u003e\n\u003cli\u003e0-25 kW adjustable load, continuous duty\u003c\/li\u003e\n\u003cli\u003e415V rated voltage, 50\/60 Hz, power factor 1\u003c\/li\u003e\n\u003cli\u003eSmart control panel maintains optimum generator load\u003c\/li\u003e\n\u003cli\u003eHelps prevent wet stacking and cylinder glazing\u003c\/li\u003e\n\u003cli\u003eRated for ambient temperatures up to 50°C\u003c\/li\u003e\n\u003cli\u003eSuited to mining, data centre, telecom, defence and pump station use\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 560 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (L x W x H):\u003c\/strong\u003e 146 x 116 x 128.7 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Outdoor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad steps:\u003c\/strong\u003e 1 \/ 2 \/ 2 \/ 5 \/ 5 \/ 5 \/ 5 kW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAirflow:\u003c\/strong\u003e 1.2 m³\/s\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminals per phase:\u003c\/strong\u003e 1 x M12\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplay:\u003c\/strong\u003e 7-inch HMI instrument display\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElements:\u003c\/strong\u003e Stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Galvanised steel canopy and galvanised skid base\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandling:\u003c\/strong\u003e Top lift with fork pockets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSound level:\u003c\/strong\u003e 85 dBA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSupplied through Genelite and supported Australia-wide by Gen4Sale, an Authorised Genelite Master Dealer.\u003c\/p\u003e","brand":"Genelite","offers":[{"title":"Default Title","offer_id":46168924127423,"sku":"GLB-25","price":0.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/7409\/5295\/files\/15-180kW-auto-load-bank_7fcb57e6-707f-4956-af16-b8bcb338aac9.jpg?v=1788916866"},{"product_id":"bes27s3","title":"27kVA Genelite Hybrid Energy System BES27S3","description":"\u003cp\u003eThe BES27S3 is a 27kVA hybrid micro-grid system that combines solar, battery storage and a diesel generator. Its LiFePO4 (lithium iron phosphate) battery pack is air cooled, a smart energy management system with AC\/DC conversion links the sources, and the system can charge from the grid and discharge back to it.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBidirectional grid charge and discharge lets the battery take power from the grid and feed it back.\u003c\/li\u003e\n\u003cli\u003eSolar, battery storage and a diesel generator are combined as one hybrid micro-grid system.\u003c\/li\u003e\n\u003cli\u003eAC\/DC conversion lets the DC battery and solar supply AC loads and lets AC sources charge the battery, and the smart energy management system works with it.\u003c\/li\u003e\n\u003cli\u003eAn RCD leakage protector cuts the supply on earth leakage.\u003c\/li\u003e\n\u003cli\u003eA plug-and-play interface is provided for connection.\u003c\/li\u003e\n\u003cli\u003eThe fuel tank is large capacity and leak-proof.\u003c\/li\u003e\n\u003cli\u003eA fire safety system and a remote cooling system are included.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat it will run\u003c\/h3\u003e\n\u003cp\u003eWith a 27kVA rating, size the system from the loads that run at the same time rather than the total of everything on site, and allow extra for motors, which draw a surge well above their running current as they start. A licensed electrician should install and assess any connection to a site's wiring. If you are not sure of your total, send us your load list and site details and we will help work out the sizing.\u003c\/p\u003e\n\u003cp\u003eThe BES27S3 suits commercial sites that want solar, battery storage and a generator working together, from peak load support to backup power.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrice on application.\u003c\/strong\u003e We quote each system to your site and the options it needs. Use Add to Quote on this page and we will come back to you with a price.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul style=\"list-style-position: outside; padding-left: 1.5em; margin-left: 0;\"\u003e\n\u003cli\u003e27 kVA hybrid micro-grid system combining solar, battery storage and diesel generator\u003c\/li\u003e\n\u003cli\u003eLiFePO4 (lithium iron phosphate) air-cooled battery pack\u003c\/li\u003e\n\u003cli\u003eSmart energy management system with AC\/DC conversion\u003c\/li\u003e\n\u003cli\u003eBidirectional grid charge\/discharge capability\u003c\/li\u003e\n\u003cli\u003eRCD leakage protector\u003c\/li\u003e\n\u003cli\u003ePlug-and-play interface\u003c\/li\u003e\n\u003cli\u003eLeak-proof large-capacity fuel tank\u003c\/li\u003e\n\u003cli\u003eFire safety system and remote cooling system\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSupplied through Genelite and supported Australia-wide by Gen4Sale, an Authorised Genelite Master Dealer.\u003c\/p\u003e","brand":"Genelite","offers":[{"title":"Default Title","offer_id":46168924160191,"sku":"BES27S3","price":0.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/7409\/5295\/files\/BES14S-50S3-1_0d3050bd-2b9f-460f-9c4d-eac690208a95.png?v=1788916868"},{"product_id":"bes34s3","title":"34kVA Genelite Hybrid Energy System BES34S3","description":"\u003cp\u003eThe BES34S3 is a 34kVA hybrid system that integrates solar, battery storage and a diesel generator in one unit. A LiFePO4 air-cooled battery pack is managed by a smart AC\/DC energy management system, and the system can charge from and discharge power to the grid.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCharging from and discharging to the grid is built in, for peak-load support or backup.\u003c\/li\u003e\n\u003cli\u003eSolar, battery storage and a diesel generator are integrated in one system.\u003c\/li\u003e\n\u003cli\u003eThe smart AC\/DC energy management system links the sources, and AC\/DC conversion is what lets the DC battery and solar supply AC loads.\u003c\/li\u003e\n\u003cli\u003eThe plug-and-play interface comes with RCD leakage protection, which cuts the supply on earth leakage.\u003c\/li\u003e\n\u003cli\u003eThe fuel tank is large capacity and leak-proof.\u003c\/li\u003e\n\u003cli\u003eA remote cooling system is fitted.\u003c\/li\u003e\n\u003cli\u003eA fire safety system is built in.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat it will run\u003c\/h3\u003e\n\u003cp\u003eSize the BES34S3 against the loads that run together at the busiest time, not the sum of everything connected, and compare that figure with the 34kVA rating. Motors draw a surge well above their running current as they start, so allow for the largest one. Any link to a site's wiring should be made by a licensed electrician. Send us your load list and site details and we will help check the sizing.\u003c\/p\u003e\n\u003cp\u003eThe BES34S3 suits commercial and industrial sites that want solar, battery storage and a generator working together, including peak-load support and backup.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrice on application.\u003c\/strong\u003e We quote each system to the site and the options it needs. Use Add to Quote on this page and we will come back to you with a price.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul style=\"list-style-position: outside; padding-left: 1.5em; margin-left: 0;\"\u003e\n\u003cli\u003eIntegrates solar, battery storage and diesel generator in one system\u003c\/li\u003e\n\u003cli\u003eLiFePO4 air-cooled battery pack\u003c\/li\u003e\n\u003cli\u003eSmart AC\/DC energy management system\u003c\/li\u003e\n\u003cli\u003ePlug and play interface with RCD leakage protection\u003c\/li\u003e\n\u003cli\u003eLeak-proof, large-capacity fuel tank\u003c\/li\u003e\n\u003cli\u003eSuper-silent structure with remote cooling system\u003c\/li\u003e\n\u003cli\u003eFire safety system built in\u003c\/li\u003e\n\u003cli\u003eCan charge\/discharge power to the grid for peak-load support or backup\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSupplied through Genelite and supported Australia-wide by Gen4Sale, an Authorised Genelite Master Dealer.\u003c\/p\u003e","brand":"Genelite","offers":[{"title":"Default Title","offer_id":46168924258495,"sku":"BES34S3","price":0.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/7409\/5295\/files\/BES14S-50S3-1_e116820f-40f5-4db7-b02f-5a8c510e0c29.png?v=1788916873"},{"product_id":"glb-40-kw","title":"40kW Genelite Load Bank GLB-40","description":"\u003cp\u003eThe GLB-40 is an automatic resistive load bank rated for continuous duty from 0 to 40 kW at 415 V, 50 or 60 Hz and a power factor of 1. Its outdoor enclosure can be installed permanently indoors or outdoors.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe smart control panel keeps a connected generator at an optimum load without manual switching, which helps prevent wet stacking and cylinder glazing.\u003c\/li\u003e\n\u003cli\u003eEight load steps, from 1 kW to 10 kW, give fine control up to 40 kW.\u003c\/li\u003e\n\u003cli\u003eRated for ambient temperatures up to 50°C, with a rugged design aimed at Australian conditions.\u003c\/li\u003e\n\u003cli\u003eStainless steel elements sit inside a galvanised steel canopy on a galvanised skid base.\u003c\/li\u003e\n\u003cli\u003eFork pockets and a top lift provide handling points for positioning the unit with suitable lifting equipment.\u003c\/li\u003e\n\u003cli\u003eA 7-inch HMI instrument display sits at the control panel.\u003c\/li\u003e\n\u003cli\u003eThe load connects at one M12 terminal per phase.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat it is for\u003c\/h3\u003e\n\u003cp\u003eThe GLB-40 is intended for maintaining minimum generator loads and for on-site testing at mining camps, data centres, commercial buildings, telecommunications sites, essential services, defence sites and pump stations. A resistive load bank applies real power (kW) and no reactive load, so match the rating to the generator's kW output (kVA multiplied by power factor). Have a licensed electrician connect the load cables, and send us the generator's make, model and rating if you want help choosing a size.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrice on application.\u003c\/strong\u003e Each load bank is quoted to your configuration and site. Use Add to Quote on this page and we will come back to you with a price.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul style=\"list-style-position: outside; padding-left: 1.5em; margin-left: 0;\"\u003e\n\u003cli\u003eAutomatic operation, 0-40 kW resistive load range\u003c\/li\u003e\n\u003cli\u003eContinuous duty rating\u003c\/li\u003e\n\u003cli\u003e415V, 50\/60 Hz, power factor 1\u003c\/li\u003e\n\u003cli\u003eCan be permanently installed indoors or outdoors\u003c\/li\u003e\n\u003cli\u003eRated for ambient temperatures up to 50 degrees C\u003c\/li\u003e\n\u003cli\u003eSmart control panel maintains optimum generator load\u003c\/li\u003e\n\u003cli\u003eHelps prevent wet stacking and cylinder glazing\u003c\/li\u003e\n\u003cli\u003eSuited to mining camps, data centres, telecoms, defence, and pump stations\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 580 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (L x W x H):\u003c\/strong\u003e 146 x 116 x 128.7 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Outdoor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad steps:\u003c\/strong\u003e 1 \/ 2 \/ 2 \/ 5 \/ 5 \/ 5 \/ 10 \/ 10 kW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAirflow:\u003c\/strong\u003e 1.8 m³\/s\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminals per phase:\u003c\/strong\u003e 1 x M12\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplay:\u003c\/strong\u003e 7-inch HMI instrument display\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElements:\u003c\/strong\u003e Stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Galvanised steel canopy and galvanised skid base\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandling:\u003c\/strong\u003e Top lift with fork pockets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSound level:\u003c\/strong\u003e 85 dBA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSupplied through Genelite and supported Australia-wide by Gen4Sale, an Authorised Genelite Master Dealer.\u003c\/p\u003e","brand":"Genelite","offers":[{"title":"Default Title","offer_id":46168924291263,"sku":"GLB-40","price":0.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/7409\/5295\/files\/15-180kW-auto-load-bank_da8bdd2d-50ac-456c-a72f-5ff0837ccb3e.jpg?v=1788916874"},{"product_id":"pdl-50-kw","title":"50kW Genelite Load Bank PDL-50","description":"\u003cp\u003eFor generator load testing up to 50 kW, the PDL-50 is a manually operated resistive dummy load bank rated for continuous duty at 415 V and 50 or 60 Hz. Its low-heat-emitting elements are metal-sheathed and finned, made from high-grade nickel resistance wire in U-type form, and industrial fan blowers are built in for cooling.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLoad is stepped up with switches and set precisely with a rheostat, so the test load can be dialled in by hand.\u003c\/li\u003e\n\u003cli\u003eThe fan blowers can be powered by the load bank itself or by an external supply.\u003c\/li\u003e\n\u003cli\u003eHeavy-duty casters are fitted for mobility during generator load testing.\u003c\/li\u003e\n\u003cli\u003eEye hooks on top are provided for lifting the unit with suitable lifting equipment.\u003c\/li\u003e\n\u003cli\u003eTest AC voltage fluctuation of ±15% is accepted at 50 Hz or 60 Hz, which gives a wide test voltage range.\u003c\/li\u003e\n\u003cli\u003eLoad cables terminate on a terminal block for convenient connection.\u003c\/li\u003e\n\u003cli\u003eNEMA Type 1 enclosure for indoor use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat it is for\u003c\/h3\u003e\n\u003cp\u003eThe PDL-50 puts a known electrical load on a generator so the set can be checked under load. The dummy load turns the generator's output into heat, and because the load is resistive it applies real power (kW) and no reactive load. Match the rating to the generator's kW output (kVA multiplied by power factor). The enclosure is for indoor use, so keep the unit under cover, and have a licensed electrician connect the load cables. If you are unsure about sizing, send us the generator's make, model and rating.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 260 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (L x W x H):\u003c\/strong\u003e 72 x 105 x 135 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated load:\u003c\/strong\u003e 0 to 50 kW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType of load:\u003c\/strong\u003e Resistive\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDuty:\u003c\/strong\u003e Continuous\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated voltage:\u003c\/strong\u003e 415V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated frequency:\u003c\/strong\u003e 50 Hz \/ 60 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation:\u003c\/strong\u003e Manual\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e NEMA 1 (indoor)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage tolerance:\u003c\/strong\u003e ±15% at 50 Hz or 60 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElements:\u003c\/strong\u003e Low-heat resistive elements, nickel resistance wire (U-type)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling:\u003c\/strong\u003e Built-in industrial fan blowers, internally or externally powered\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSupplied through Genelite and supported Australia-wide by Gen4Sale, an Authorised Genelite Master Dealer.\u003c\/p\u003e","brand":"Genelite","offers":[{"title":"Default Title","offer_id":46168924356799,"sku":"PDL-50","price":13969.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/7409\/5295\/files\/pdl-load-bank_34da956d-8af7-4185-96cf-f904db4d33a0.jpg?v=1790503901"},{"product_id":"bes50s3","title":"50kVA Genelite Hybrid Energy System BES50S3","description":"\u003cp\u003eThe BES50S3 is a hybrid energy system that combines solar PV, an 82.9 kWh LiFePO4 battery pack and a Perkins 1104D-TG2 diesel generator behind a 50kVA (50kW) three phase output at 50Hz, with a power factor of 1. An AC\/DC power conversion system and a smart energy management system schedule and distribute power between the sources, and the system can both draw power from the grid and feed power back to it.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOne button switches the operating mode: hybrid mode schedules and distributes power from the PV system, the battery and the diesel generator, alone or combined, and battery mode runs from PV and battery without the generator.\u003c\/li\u003e\n\u003cli\u003eBattery mode measures 50 dB(A) at 7 m, against 58 dB(A) at 7 m in hybrid mode, so the generator can stay off when noise matters.\u003c\/li\u003e\n\u003cli\u003eBecause the system can both draw from and feed the grid, the battery can cover part of a site's peak demand.\u003c\/li\u003e\n\u003cli\u003eA 65 kWp MPPT input, which tracks the maximum power point of the solar array, charges the battery from PV panels.\u003c\/li\u003e\n\u003cli\u003eThe 200 litre leak-proof fuel tank feeds a diesel generator rated at 60kVA (48kW).\u003c\/li\u003e\n\u003cli\u003eOperating data can be reported daily, monthly and annually, and the control strategy can be adjusted using the economic results.\u003c\/li\u003e\n\u003cli\u003eAn RCD leakage protector disconnects the supply on earth leakage, and a fire safety system is built in.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAt 415V three phase, 50kVA is about 70A per phase (50kVA divided by 415V and 1.73). Battery charge and discharge rates are both 1C, and the grid input is rated at 50kVA (50kW). At the full 50kW rating the 82.9 kWh battery alone would last about 1.66 hours (82.9 divided by 50) before losses, and lighter loads last longer.\u003c\/p\u003e\n\u003ch3\u003eWhat it will run\u003c\/h3\u003e\n\u003cp\u003eThe BES50S3 supplies three phase loads up to 50kW, and at a power factor of 1 that is also 50kVA. Size it from the site's demand profile, including the starting surge of large motors, and remember that battery mode runs on PV and battery alone, so the loads you want in that mode need to fit within what they can supply. A licensed electrician or engineer should assess the connection to the site. Send us your load profile and site details and we will help with sizing.\u003c\/p\u003e\n\u003cp\u003eThe BES50S3 suits industrial sites that need peak load support, extended low-power operation or backup power.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrice on application.\u003c\/strong\u003e We quote this system to your requirements and site. Use Add to Quote on this page and we will come back to you with a price.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul style=\"list-style-position: outside; padding-left: 1.5em; margin-left: 0;\"\u003e\n\u003cli\u003eHybrid system combining solar PV, battery storage and diesel generator\u003c\/li\u003e\n\u003cli\u003eCan charge\/discharge power to the grid\u003c\/li\u003e\n\u003cli\u003eLiFePO4 liquid-cooled battery pack\u003c\/li\u003e\n\u003cli\u003eSmart energy management system with AC\/DC power conversion\u003c\/li\u003e\n\u003cli\u003eRCD leakage protector for safety\u003c\/li\u003e\n\u003cli\u003ePlug and play interface\u003c\/li\u003e\n\u003cli\u003eLarge-capacity, leak-proof fuel tank\u003c\/li\u003e\n\u003cli\u003eMarketed as 'super-silent' structure with remote cooling and fire safety system\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3250 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (L x W x H):\u003c\/strong\u003e 230 x 145 x 257 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated output:\u003c\/strong\u003e 50kVA \/ 50kW, power factor 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhase and frequency:\u003c\/strong\u003e Three phase, 50Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAC voltage and current:\u003c\/strong\u003e 380 \/ 400 \/ 415V, 76 \/ 72 \/ 70A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiesel engine:\u003c\/strong\u003e Perkins 1104D-TG2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiesel rated power:\u003c\/strong\u003e 60kVA \/ 48kW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel tank capacity:\u003c\/strong\u003e 200 L\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery:\u003c\/strong\u003e LiFePO4, 82.9 kWh, 160 to 800V DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCharge and discharge rate:\u003c\/strong\u003e Maximum charge 1C, maximum discharge 1C, recommended discharge 1C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolar (MPPT) input:\u003c\/strong\u003e 65 kWp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrid input:\u003c\/strong\u003e 50kVA \/ 50kW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise level:\u003c\/strong\u003e Hybrid mode 58 dB(A) at 7 m, battery mode 50 dB(A) at 7 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards and certifications:\u003c\/strong\u003e UN 38.3, IEC 62619, IEC 62477, IEC 62933-2-1, CE Declaration of Conformity, VDE-AR-N 4110, EN 50549-1, UL 1973\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSupplied through Genelite and supported Australia-wide by Gen4Sale, an Authorised Genelite Master Dealer.\u003c\/p\u003e","brand":"Genelite","offers":[{"title":"Default Title","offer_id":46168924389567,"sku":"BES50S3","price":0.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/7409\/5295\/files\/BES14S-50S3-1-1200x750.webp?v=1790503854"},{"product_id":"glb-50-kw","title":"50kW Genelite Load Bank GLB-50","description":"\u003cp\u003eThe GLB-50 is an automatically controlled resistive load bank for continuous duty from 0 to 50 kW at 415 V, 50 or 60 Hz and unity power factor. It is designed for permanent installation indoors or outdoors and is rated for ambient temperatures up to 50°C.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAutomatic control through a smart control panel keeps the generator at an optimum load, which helps prevent wet stacking and cylinder glazing.\u003c\/li\u003e\n\u003cli\u003eThe load is resistive, so the engine is loaded with real power (kW) up to the 50 kW rating.\u003c\/li\u003e\n\u003cli\u003eStainless steel elements are housed in a galvanised steel canopy on a galvanised skid base.\u003c\/li\u003e\n\u003cli\u003eFork pockets and a top lift are built in for positioning the unit with suitable lifting equipment.\u003c\/li\u003e\n\u003cli\u003eA 7-inch HMI instrument display sits at the control panel.\u003c\/li\u003e\n\u003cli\u003eLoad cables connect at one M12 terminal per phase.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat it is for\u003c\/h3\u003e\n\u003cp\u003eSites that keep standby generators, such as telecommunications facilities, essential services, commercial buildings and data centres, use a load bank like the GLB-50 to hold a minimum load on the set and to support on-site testing. It is also aimed at mining camps, defence sites and pump stations. Size the load bank from the generator's kW output (kVA multiplied by power factor). Installation and cable connection should be done by a licensed electrician. Send us the make, model and rating of your generator and we will help you choose.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrice on application.\u003c\/strong\u003e Load banks are quoted to the configuration and the site. Use Add to Quote on this page and we will come back to you with a price.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul style=\"list-style-position: outside; padding-left: 1.5em; margin-left: 0;\"\u003e\n\u003cli\u003eAutomatic-operation load bank\u003c\/li\u003e\n\u003cli\u003eLoad range 0-50 kW, resistive type, continuous duty\u003c\/li\u003e\n\u003cli\u003eRated voltage 415V, 50\/60Hz, unity power factor\u003c\/li\u003e\n\u003cli\u003eRated for ambient temperatures up to 50C\u003c\/li\u003e\n\u003cli\u003eDesigned for permanent indoor or outdoor installation\u003c\/li\u003e\n\u003cli\u003eHelps prevent wet-stacking and cylinder glazing by maintaining optimum generator load\u003c\/li\u003e\n\u003cli\u003eMarketed for mining camps, data centres, telecommunications, defence, pump stations\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 580 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (L x W x H):\u003c\/strong\u003e 146 x 116 x 128.7 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Outdoor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAirflow:\u003c\/strong\u003e 1.8 m³\/s\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminals per phase:\u003c\/strong\u003e 1 x M12\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplay:\u003c\/strong\u003e 7-inch HMI instrument display\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElements:\u003c\/strong\u003e Stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Galvanised steel canopy and galvanised skid base\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandling:\u003c\/strong\u003e Top lift with fork pockets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSound level:\u003c\/strong\u003e 85 dBA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSupplied through Genelite and supported Australia-wide by Gen4Sale, an Authorised Genelite Master Dealer.\u003c\/p\u003e","brand":"Genelite","offers":[{"title":"Default Title","offer_id":46168924422335,"sku":"GLB-50","price":0.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/7409\/5295\/files\/15-180kW-auto-load-bank_7f3f18dd-1b8c-40f3-832b-e005ead117e4.jpg?v=1790503733"},{"product_id":"glb-80-kw","title":"80kW Genelite Load Bank GLB-80","description":"\u003cp\u003eThe GLB-80 is an automatic resistive load bank with a load range of 0 to 80 kW at 415 V and 50 or 60 Hz, unity power factor and a continuous duty rating. It is designed for permanent installation, indoors or outdoors.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLoad goes on in four equal 20 kW steps, so a generator is loaded in quarters of the 80 kW rating.\u003c\/li\u003e\n\u003cli\u003eA smart control panel keeps the generator at an optimum operating load, which helps prevent wet stacking and cylinder glazing.\u003c\/li\u003e\n\u003cli\u003eRated for ambient temperatures up to 50°C, with a design aimed at Australian conditions.\u003c\/li\u003e\n\u003cli\u003eStainless steel elements are fitted inside a galvanised steel canopy on a galvanised skid base.\u003c\/li\u003e\n\u003cli\u003eFork pockets and a top lift allow the unit to be positioned with suitable lifting equipment.\u003c\/li\u003e\n\u003cli\u003eA 7-inch HMI instrument display sits at the control panel.\u003c\/li\u003e\n\u003cli\u003eLoad cables land on one M12 terminal per phase.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat it is for\u003c\/h3\u003e\n\u003cp\u003eCylinder glazing is a hard, glossy film that can form on the bore of an engine run at low load, and wet stacking is unburnt fuel building up in a diesel engine's exhaust. The GLB-80 is used to avoid both by maintaining a minimum load on a generator, and to run on-site tests. Typical sites are mining camps, data centres, commercial buildings, telecommunications and essential services, as well as defence and pump stations. The load is resistive, so it applies real power (kW) and no reactive load: size it from the generator's kW output (kVA multiplied by power factor), and send us the make, model and rating if you would like help.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrice on application.\u003c\/strong\u003e Each load bank is quoted to your configuration and site. Use Add to Quote on this page and we will come back to you with a price.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul style=\"list-style-position: outside; padding-left: 1.5em; margin-left: 0;\"\u003e\n\u003cli\u003e80 kW resistive load capacity\u003c\/li\u003e\n\u003cli\u003eAutomatic operation via smart control panel\u003c\/li\u003e\n\u003cli\u003e415V, 50\/60Hz rated\u003c\/li\u003e\n\u003cli\u003eContinuous duty rating\u003c\/li\u003e\n\u003cli\u003eOperates in ambient temperatures up to 50°C\u003c\/li\u003e\n\u003cli\u003eIndoor or outdoor permanent installation\u003c\/li\u003e\n\u003cli\u003eHelps prevent wet-stacking and cylinder glazing\u003c\/li\u003e\n\u003cli\u003eSuited to mining, data centre, telecom, defence and pump station use\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 560 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (L x W x H):\u003c\/strong\u003e 146 x 116 x 128.7 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower factor:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Outdoor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad steps:\u003c\/strong\u003e 20 \/ 20 \/ 20 \/ 20 kW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAirflow:\u003c\/strong\u003e 2.4 m³\/s\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminals per phase:\u003c\/strong\u003e 1 x M12\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplay:\u003c\/strong\u003e 7-inch HMI instrument display\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElements:\u003c\/strong\u003e Stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Galvanised steel canopy and galvanised skid base\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandling:\u003c\/strong\u003e Top lift with fork pockets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSound level:\u003c\/strong\u003e 85 dBA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSupplied through Genelite and supported Australia-wide by Gen4Sale, an Authorised Genelite Master Dealer.\u003c\/p\u003e","brand":"Genelite","offers":[{"title":"Default Title","offer_id":46168924455103,"sku":"GLB-80","price":0.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/7409\/5295\/files\/15-180kW-auto-load-bank_47d2c1b1-69fa-482c-b295-50727a18edf2.jpg?v=1788916877"},{"product_id":"pdl-100-kw","title":"100kW Genelite Load Bank PDL-100","description":"\u003cp\u003eThe PDL-100 is a manually operated resistive load bank with a rated load of 0 to 100 kW at 415 V, 50 or 60 Hz. It is rated for continuous duty and puts a controlled electrical load on a generator during testing. The elements are low-heat-emitting and metal-sheathed, with cooling fins, made from high-grade nickel resistance wire in U-type form.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLoad is set by hand with 8 switches for incremental steps, plus a rheostat for exact power setting between them.\u003c\/li\u003e\n\u003cli\u003eBuilt-in heavy-duty industrial fan blowers cool the elements and can run from the load bank itself or from an external supply.\u003c\/li\u003e\n\u003cli\u003eHeavy-duty casters give the unit mobility during generator load testing, so it can be positioned beside the set under test.\u003c\/li\u003e\n\u003cli\u003eEye hooks on top are fitted for lifting the unit with suitable lifting equipment.\u003c\/li\u003e\n\u003cli\u003eTest AC voltage can fluctuate by ±15% at 50 Hz or 60 Hz, which suits a wide range of test voltages.\u003c\/li\u003e\n\u003cli\u003eLoad cables terminate on a terminal block for convenient connection.\u003c\/li\u003e\n\u003cli\u003eNEMA Type 1 enclosure for indoor use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat it is for\u003c\/h3\u003e\n\u003cp\u003eA dummy load bank turns a generator's electrical output into heat, so a set can be run under a known load without connecting site equipment. The PDL-100 is used for generator load testing, with the operator stepping the load up and down by hand. Match the rating to the generator's kW output (its kVA rating multiplied by its power factor). The enclosure is for indoor use, so site the unit under cover, and have a licensed electrician make the load cable connections. Send us the generator's make, model and rating and we will help you choose the right size.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 368 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (L x W x H):\u003c\/strong\u003e 85 x 105 x 135 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated load:\u003c\/strong\u003e 0 to 100 kW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType of load:\u003c\/strong\u003e Resistive\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDuty:\u003c\/strong\u003e Continuous\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated voltage:\u003c\/strong\u003e 415V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated frequency:\u003c\/strong\u003e 50 Hz \/ 60 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation:\u003c\/strong\u003e Manual\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e NEMA 1 (indoor)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad steps:\u003c\/strong\u003e 9 steps including variable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage tolerance:\u003c\/strong\u003e ±15% at 50 Hz or 60 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling:\u003c\/strong\u003e Built-in industrial fan blowers, internally or externally powered\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSupplied through Genelite and supported Australia-wide by Gen4Sale, an Authorised Genelite Master Dealer.\u003c\/p\u003e","brand":"Genelite","offers":[{"title":"Default Title","offer_id":46168924487871,"sku":"PDL-100","price":16379.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/7409\/5295\/files\/pdl-load-bank.jpg?v=1788916879"},{"product_id":"hp265-hybrid-power-station","title":"Genelite HP265 Hybrid Power Station","description":"\u003cp\u003eThe HP265 is a hybrid power station rated at 120 kVA continuous with a 265 kVA 5-second peak. It uses LiFePO4 battery chemistry, combines solar, bio-diesel and battery inputs, and offers up to 16.5 kW of charging power.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe 120 kVA continuous rating covers steady load, while the 265 kVA 5-second peak gives headroom for short surges such as motor starting.\u003c\/li\u003e\n\u003cli\u003eLiFePO4 (lithium iron phosphate) is the battery chemistry, and up to 16.5 kW of charging power is available to recharge it.\u003c\/li\u003e\n\u003cli\u003eSolar, bio-diesel and battery inputs are combined in one station, so a site can draw on all three sources.\u003c\/li\u003e\n\u003cli\u003eBuilt-in management systems cover both sides: a generator management system (GMS) for the generator input and an energy storage management system for the battery.\u003c\/li\u003e\n\u003cli\u003eMonitoring covers fuel volume and power generation, so fuel and output can be tracked.\u003c\/li\u003e\n\u003cli\u003eUp to 16 units can operate in parallel, so power can be added as a site grows.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat it will run\u003c\/h3\u003e\n\u003cp\u003eCompare the site's steady load with the 120 kVA continuous rating and its short surges with the 265 kVA 5-second peak. Motors draw a surge well above their running current as they start, so size for the largest motor starting while the other loads are running. A licensed electrician or engineer should assess how the station connects to the site. Send us your load profile and site details and we will help with sizing.\u003c\/p\u003e\n\u003cp\u003eThe HP265 suits sites that want to combine solar, bio-diesel and battery sources, and sites that need to add power by running several stations in parallel.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrice on application.\u003c\/strong\u003e We quote each station to the site and the options it needs. Use Add to Quote on this page and we will come back to you with a price.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul style=\"list-style-position: outside; padding-left: 1.5em; margin-left: 0;\"\u003e\n\u003cli\u003e120 kVA continuous \/ 265 kVA 5-second peak power\u003c\/li\u003e\n\u003cli\u003eLiFePO4 battery chemistry\u003c\/li\u003e\n\u003cli\u003eUp to 16.5 kW charging power\u003c\/li\u003e\n\u003cli\u003eParallel operation with up to 16 units\u003c\/li\u003e\n\u003cli\u003eBuilt-in generator management system (GMS)\u003c\/li\u003e\n\u003cli\u003eBuilt-in energy storage management system\u003c\/li\u003e\n\u003cli\u003eFuel volume and power generation monitoring\u003c\/li\u003e\n\u003cli\u003eCombines solar, bio-diesel and battery inputs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3600 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (L x W x H):\u003c\/strong\u003e 395 x 110 x 225 cm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSupplied through Genelite and supported Australia-wide by Gen4Sale, an Authorised Genelite Master Dealer.\u003c\/p\u003e","brand":"Genelite","offers":[{"title":"Default Title","offer_id":46168924520639,"sku":"HP265","price":0.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/7409\/5295\/files\/HP265.jpg?v=1788916881"},{"product_id":"p-grid-hybrid-unit","title":"Genelite P-Grid Hybrid Unit","description":"\u003cp\u003eThe P-Grid is a hybrid power system that combines a diesel generator with a battery energy storage module. Its rated AC power output is around 160 kVA, against about 38 kVA from the generator alone, and the battery uses AGM lead-carbon technology.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe battery supplies the difference between the roughly 38 kVA generator and the 160 kVA output, so the generator does not have to be sized for the whole peak load.\u003c\/li\u003e\n\u003cli\u003eA 324 litre fuel tank feeds the diesel generator.\u003c\/li\u003e\n\u003cli\u003eAGM lead-carbon battery technology is used for the storage module.\u003c\/li\u003e\n\u003cli\u003eThe system is rated to operate from -20°C to 50°C ambient.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat it will run\u003c\/h3\u003e\n\u003cp\u003eCompare the site's peak demand with the output of around 160 kVA, and its steady demand with the 38 kVA the generator can supply alone. Motors draw a surge well above their running current as they start, so allow for the biggest motor starting with the other loads on. A licensed electrician or engineer should assess how the unit connects to the site. Send us your load profile and site details and we will help with sizing.\u003c\/p\u003e\n\u003cp\u003eThe P-Grid suits sites where demand spikes well above the average, such as construction and rental work: the battery covers the peaks and a smaller generator covers the rest.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrice on application.\u003c\/strong\u003e We quote this system to your requirements and site. Use Add to Quote on this page and we will come back to you with a price.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul style=\"list-style-position: outside; padding-left: 1.5em; margin-left: 0;\"\u003e\n\u003cli\u003eCombines a diesel generator with a battery energy storage module (hybrid system)\u003c\/li\u003e\n\u003cli\u003eRated AC power output of around 160 kVA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInverters:\u003c\/strong\u003e Three phase industrial inverters\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAC input:\u003c\/strong\u003e 400V\u003c\/li\u003e\n\u003cli\u003eUsable battery capacity of 50 kWh\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGenerator:\u003c\/strong\u003e 38 kVA, Stage V\u003c\/li\u003e\n\u003cli\u003eUses AGM lead-carbon battery technology\u003c\/li\u003e\n\u003cli\u003eRated to operate from -20°C to 50°C ambient\u003c\/li\u003e\n\u003cli\u003eCE approved and stated to comply with EN\/ISO standards\u003c\/li\u003e\n\u003cli\u003eDelivered fluids-filled, load-tested and function-tested, ready to run once fuelled\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 4984 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (L x W x H):\u003c\/strong\u003e 233 x 212.5 x 215.5 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel tank capacity:\u003c\/strong\u003e 324 L\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSupplied through Genelite and supported Australia-wide by Gen4Sale, an Authorised Genelite Master Dealer.\u003c\/p\u003e","brand":"Genelite","offers":[{"title":"Default Title","offer_id":46168924717247,"sku":null,"price":0.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/7409\/5295\/files\/P-Grid.jpg?v=1788916884"},{"product_id":"glb-180-kw","title":"180kW Genelite Load Bank GLB-180","description":"\u003cp\u003eThe GLB-180 is an automatic resistive load bank rated to 180 kW at 415 V, 50 or 60 Hz and unity power factor, with a continuous duty rating. It is built for permanent installation alongside a generator, indoors or outdoors.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe control panel automatically keeps the generator loaded at an efficient operating point, which helps prevent wet stacking and cylinder glazing.\u003c\/li\u003e\n\u003cli\u003eRated for ambient temperatures up to 50°C, with a design aimed at Australian conditions.\u003c\/li\u003e\n\u003cli\u003eA 7-inch HMI instrument display sits at the control panel.\u003c\/li\u003e\n\u003cli\u003eStainless steel elements sit in a galvanised steel canopy on a galvanised skid base.\u003c\/li\u003e\n\u003cli\u003eFork pockets and a top lift are provided for positioning the unit with suitable lifting equipment.\u003c\/li\u003e\n\u003cli\u003eLoad cables connect at one M12 terminal per phase.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat it is for\u003c\/h3\u003e\n\u003cp\u003eUse the GLB-180 where a generator needs a minimum load maintained or a test run on site. The sectors it targets include mining camps, data centres, commercial buildings, telecommunications, essential services, defence and pump stations. A resistive load bank applies real power (kW) and no reactive load, so size it from the generator's kW output (kVA multiplied by power factor). Installation and cable connection should be done by a licensed electrician. Send us your generator's details and we will help with sizing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrice on application.\u003c\/strong\u003e Load banks are quoted to the configuration and the site. Use Add to Quote on this page and we will come back to you with a price.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul style=\"list-style-position: outside; padding-left: 1.5em; margin-left: 0;\"\u003e\n\u003cli\u003eAutomatic load bank rated 0-180 kW\u003c\/li\u003e\n\u003cli\u003eResistive load type, continuous duty\u003c\/li\u003e\n\u003cli\u003eRated at 415V, 50\/60 Hz, unity power factor\u003c\/li\u003e\n\u003cli\u003eCan be permanently installed indoors or outdoors\u003c\/li\u003e\n\u003cli\u003eDesigned to help prevent wet-stacking and cylinder glazing in generators\u003c\/li\u003e\n\u003cli\u003eRated for ambient temperatures up to 50°C\u003c\/li\u003e\n\u003cli\u003eSuited to mining, data centre, telecoms, defence and pump-station use\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 560 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (L x W x H):\u003c\/strong\u003e 146 x 116 x 128.7 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Outdoor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAirflow:\u003c\/strong\u003e 2.4 m³\/s\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminals per phase:\u003c\/strong\u003e 1 x M12\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplay:\u003c\/strong\u003e 7-inch HMI instrument display\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElements:\u003c\/strong\u003e Stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Galvanised steel canopy and galvanised skid base\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandling:\u003c\/strong\u003e Top lift with fork pockets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSound level:\u003c\/strong\u003e 85 dBA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSupplied through Genelite and supported Australia-wide by Gen4Sale, an Authorised Genelite Master Dealer.\u003c\/p\u003e","brand":"Genelite","offers":[{"title":"Default Title","offer_id":46168924750015,"sku":"GLB-180","price":0.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/7409\/5295\/files\/15-180kW-auto-load-bank_4c801e01-7579-43da-8668-9d73abbd096b.jpg?v=1788916886"},{"product_id":"pdl-200-kw","title":"200kW Genelite Load Bank PDL-200","description":"\u003cp\u003eThe PDL-200 is a manual resistive load bank for generator testing, with a load range of 0 to 200 kW at 415 V and 50 or 60 Hz. It is rated for continuous duty. The elements are low-heat-emitting, metal-sheathed and finned, made from high-grade nickel resistance wire in U-type form.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEight switches add load in increments, and a rheostat provides variable load for exact power setting.\u003c\/li\u003e\n\u003cli\u003eBuilt-in industrial fan blowers cool the unit and can be powered by the load bank itself or by an external supply.\u003c\/li\u003e\n\u003cli\u003eHeavy-duty casters let the unit be moved during generator testing, so it can sit close to the set under test.\u003c\/li\u003e\n\u003cli\u003eEye hooks on top are provided for lifting with suitable lifting equipment.\u003c\/li\u003e\n\u003cli\u003eTest AC voltage can fluctuate by ±15% at 50 Hz or 60 Hz, so the unit accepts a wide range of test voltages.\u003c\/li\u003e\n\u003cli\u003eLoad cables terminate on a terminal block for convenient connection.\u003c\/li\u003e\n\u003cli\u003eNEMA Type 1 enclosure, which is for indoor use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat it is for\u003c\/h3\u003e\n\u003cp\u003eThe PDL-200 is a dummy load: it absorbs a generator's output as heat so the set can be tested under load without running site equipment. Because the load is resistive, it loads the engine with real power (kW) and does not apply a reactive load. Pick a rating that suits the generator's kW output (kVA multiplied by power factor). Keep the unit under cover, and have a licensed electrician connect the load cables. If you are unsure which size fits your set, send us its make, model and rating and we will help.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 660 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (L x W x H):\u003c\/strong\u003e 99.4 x 127 x 147 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated load:\u003c\/strong\u003e 0 to 200 kW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType of load:\u003c\/strong\u003e Resistive\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDuty:\u003c\/strong\u003e Continuous\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated voltage:\u003c\/strong\u003e 415V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated frequency:\u003c\/strong\u003e 50 Hz \/ 60 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation:\u003c\/strong\u003e Manual\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e NEMA 1 (indoor)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad steps:\u003c\/strong\u003e 9 steps including variable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage tolerance:\u003c\/strong\u003e ±15% at 50 Hz or 60 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling:\u003c\/strong\u003e Built-in industrial fan blowers, internally or externally powered\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSupplied through Genelite and supported Australia-wide by Gen4Sale, an Authorised Genelite Master Dealer.\u003c\/p\u003e","brand":"Genelite","offers":[{"title":"Default Title","offer_id":46168924782783,"sku":"PDL-200","price":20899.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/7409\/5295\/files\/pdl-load-bank_38303889-f4b2-4ffa-a01e-af77e3c4eff8.jpg?v=1788916888"},{"product_id":"glb-250-kw","title":"250kW Genelite Load Bank GLB-250","description":"\u003cp\u003eThe GLB-250 is an automatic resistive load bank with a 0 to 250 kW load range at 415 V, 50 or 60 Hz and unity power factor, rated for continuous duty. It is designed for permanent installation, indoors or outdoors.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe smart control panel keeps a generator loaded at an efficient operating point, which helps prevent wet stacking and cylinder glazing.\u003c\/li\u003e\n\u003cli\u003eTen load steps, from 1 kW to 75 kW, take a generator up to 250 kW in fine increments.\u003c\/li\u003e\n\u003cli\u003eLoad cables connect at two M12 terminals per phase.\u003c\/li\u003e\n\u003cli\u003eRated for ambient temperatures up to 50°C and designed for Australian conditions.\u003c\/li\u003e\n\u003cli\u003eStainless steel elements are housed in a galvanised steel canopy on a galvanised skid base.\u003c\/li\u003e\n\u003cli\u003eFork pockets and a top lift are provided for positioning the unit with suitable lifting equipment.\u003c\/li\u003e\n\u003cli\u003eA 7-inch HMI instrument display sits at the control panel.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat it is for\u003c\/h3\u003e\n\u003cp\u003eThe GLB-250 is aimed at mining camps, data centres, commercial buildings, telecommunications, essential services, defence and pump stations that need a minimum load maintained on a generator or an on-site test run. Pick the rating from the generator's kW output (kVA multiplied by power factor): the GLB-250 applies real power (kW) and no reactive load, up to its 250 kW rating. Cable connection should be left to a licensed electrician. Send us your generator's make, model and rating and we will help you size it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrice on application.\u003c\/strong\u003e Each load bank is quoted to your configuration and site. Use Add to Quote on this page and we will come back to you with a price.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul style=\"list-style-position: outside; padding-left: 1.5em; margin-left: 0;\"\u003e\n\u003cli\u003eAutomatic load bank rated 0-250 kW\u003c\/li\u003e\n\u003cli\u003eResistive load type, continuous duty\u003c\/li\u003e\n\u003cli\u003eRated at 415V, 50\/60 Hz, unity power factor\u003c\/li\u003e\n\u003cli\u003eCan be permanently installed indoors or outdoors\u003c\/li\u003e\n\u003cli\u003eDesigned to help prevent wet-stacking and cylinder glazing in generators\u003c\/li\u003e\n\u003cli\u003eRated for ambient temperatures up to 50°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 560 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (L x W x H):\u003c\/strong\u003e 146 x 116 x 128.7 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Outdoor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad steps:\u003c\/strong\u003e 1 \/ 2 \/ 2 \/ 5 \/ 10 \/ 10 \/ 20 \/ 50 \/ 75 \/ 75 kW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAirflow:\u003c\/strong\u003e 9.8 m³\/s\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminals per phase:\u003c\/strong\u003e 2 x M12\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplay:\u003c\/strong\u003e 7-inch HMI instrument display\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElements:\u003c\/strong\u003e Stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Galvanised steel canopy and galvanised skid base\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandling:\u003c\/strong\u003e Top lift with fork pockets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSound level:\u003c\/strong\u003e 78 dBA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSupplied through Genelite and supported Australia-wide by Gen4Sale, an Authorised Genelite Master Dealer.\u003c\/p\u003e","brand":"Genelite","offers":[{"title":"Default Title","offer_id":46168924815551,"sku":"GLB-250","price":0.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/7409\/5295\/files\/250-800kW-auto-load-bank.jpg?v=1788916890"},{"product_id":"pdl-300-kw","title":"300kW Genelite Load Bank PDL-300","description":"\u003cp\u003eThe PDL-300 is a manual dummy load bank that applies a resistive load of up to 300 kW at 415 V, 50 or 60 Hz, with a continuous duty rating. Low-heat-emitting resistive elements do the work: metal-sheathed, finned, and made from high-grade nickel resistance wire in U-type form. Built-in heavy-duty industrial fan blowers cool them.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLoad is added in increments with switches, and a rheostat gives variable load for exact power setting.\u003c\/li\u003e\n\u003cli\u003eThe fan blowers can run from the load bank's own power or from an external supply.\u003c\/li\u003e\n\u003cli\u003eHeavy-duty casters are fitted for mobility during generator load testing.\u003c\/li\u003e\n\u003cli\u003eEye hooks on top are provided for lifting the unit with suitable lifting equipment.\u003c\/li\u003e\n\u003cli\u003eTest AC voltage can fluctuate by ±15% at 50 Hz or 60 Hz, which gives a wide test voltage range.\u003c\/li\u003e\n\u003cli\u003eLoad cables connect through a terminal block for convenient termination.\u003c\/li\u003e\n\u003cli\u003eNEMA Type 1 enclosure, which is for indoor use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat it is for\u003c\/h3\u003e\n\u003cp\u003eThe PDL-300 is for load testing generators. It converts a set's electrical output into heat, so a generator can be brought up to a chosen load and held there while you check how it performs. A resistive load puts real power (kW) on the engine and applies no reactive load. Choose a rating that matches the generator's kW output (kVA multiplied by power factor). The enclosure is for indoor use, so site the unit under cover, and have a licensed electrician connect the load cables. Send us the generator's make, model and rating if you want help with sizing.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 880 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (L x W x H):\u003c\/strong\u003e 110 x 127 x 147 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated load:\u003c\/strong\u003e 0 to 300 kW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType of load:\u003c\/strong\u003e Resistive\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDuty:\u003c\/strong\u003e Continuous\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated voltage:\u003c\/strong\u003e 415V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated frequency:\u003c\/strong\u003e 50 Hz \/ 60 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation:\u003c\/strong\u003e Manual\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e NEMA 1 (indoor)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage tolerance:\u003c\/strong\u003e ±15% at 50 Hz or 60 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElements:\u003c\/strong\u003e Metal-sheathed, finned, high-grade nickel resistance wire (U-type)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling:\u003c\/strong\u003e Built-in industrial fan blowers, internally or externally powered\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSupplied through Genelite and supported Australia-wide by Gen4Sale, an Authorised Genelite Master Dealer.\u003c\/p\u003e","brand":"Genelite","offers":[{"title":"Default Title","offer_id":46168924848319,"sku":"PDL-300","price":23419.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/7409\/5295\/files\/pdl-load-bank_4598d9f8-3b79-4432-8ca3-c5a53adbc880.jpg?v=1788916892"},{"product_id":"hp950-hybrid-power-station","title":"Genelite HP950 Hybrid Power Station","description":"\u003cp\u003eThe HP950 is a hybrid power station with 400 kVA of continuous power and a 950 kVA 5-second peak. It uses LiFePO4 battery chemistry, combines solar, bio-diesel and battery storage energy sources, and has a maximum charging power of 66.5 kW.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe 950 kVA 5-second peak sits well above the 400 kVA continuous rating and gives headroom for brief overloads such as a large motor starting.\u003c\/li\u003e\n\u003cli\u003eThe maximum charging power is 66.5 kW, which sets how quickly the LiFePO4 battery can be recharged.\u003c\/li\u003e\n\u003cli\u003eSolar, bio-diesel and battery storage sources are combined in one station, so a remote site can draw on more than one source.\u003c\/li\u003e\n\u003cli\u003eAn auto working mode is paired with a Diesel Generator Management System.\u003c\/li\u003e\n\u003cli\u003eUp to 16 units can run in parallel, so power can be added as demand grows.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat it will run\u003c\/h3\u003e\n\u003cp\u003eSet the site's steady demand against the 400 kVA continuous figure and its short peaks against the 950 kVA 5-second figure. Large motors pull a starting surge well above their running current, so leave headroom for the biggest one. Connection to the site's supply should be assessed by a licensed electrician or engineer. Send us your load profile and site details and we will help work through the sizing.\u003c\/p\u003e\n\u003cp\u003eThe HP950 suits remote and off-grid sites that blend solar, bio-diesel and battery storage, and larger sites that need more than one station working in parallel.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrice on application.\u003c\/strong\u003e Each station is quoted to the site and the options it needs. Use Add to Quote on this page and we will come back to you with a price.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul style=\"list-style-position: outside; padding-left: 1.5em; margin-left: 0;\"\u003e\n\u003cli\u003e950 kVA peak (5 second) power, 400 kVA continuous power\u003c\/li\u003e\n\u003cli\u003eLiFePO4 battery chemistry\u003c\/li\u003e\n\u003cli\u003eMax charging power 66.5 kW\u003c\/li\u003e\n\u003cli\u003eCombines solar, bio-diesel and battery storage energy sources\u003c\/li\u003e\n\u003cli\u003eAuto working mode with Diesel Generator Management System\u003c\/li\u003e\n\u003cli\u003eParallel operation for up to 16 units\u003c\/li\u003e\n\u003cli\u003eAimed at remote\/off-grid, eco-conscious applications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 10680 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (L x W x H):\u003c\/strong\u003e 609.6 x 243.8 x 259.1 cm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSupplied through Genelite and supported Australia-wide by Gen4Sale, an Authorised Genelite Master Dealer.\u003c\/p\u003e","brand":"Genelite","offers":[{"title":"Default Title","offer_id":46168924881087,"sku":"HP950","price":0.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/7409\/5295\/files\/HP950.jpg?v=1788916896"},{"product_id":"glb-400-kw","title":"400kW Genelite Load Bank GLB-400","description":"\u003cp\u003eThe GLB-400 is a permanently installable, automatic resistive load bank rated 0 to 400 kW, with a continuous duty rating at 415 V, 50 or 60 Hz and unity power factor. Its outdoor enclosure suits installation indoors or outdoors.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe smart control panel maintains the generator's optimum operating load automatically, which helps prevent wet stacking and cylinder glazing.\u003c\/li\u003e\n\u003cli\u003eLoad cables connect at two M12 terminals per phase.\u003c\/li\u003e\n\u003cli\u003eDesigned for ambient temperatures up to 50°C and for Australian conditions.\u003c\/li\u003e\n\u003cli\u003eStainless steel elements sit in a galvanised steel canopy, on a galvanised skid base.\u003c\/li\u003e\n\u003cli\u003eFork pockets and a top lift allow the unit to be positioned with suitable lifting equipment.\u003c\/li\u003e\n\u003cli\u003eA 7-inch HMI instrument display sits at the control panel.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat it is for\u003c\/h3\u003e\n\u003cp\u003eThe GLB-400 maintains a minimum load on a generator and supports on-site testing. It is aimed at mining camps, data centres, commercial buildings, telecommunications, essential services, defence and pump stations. Match the rating to the generator's kW output (kVA multiplied by power factor); a resistive load bank applies real power and no reactive load. Have a licensed electrician plan and make the connection. Send us the generator's make, model and rating and we will help you choose.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrice on application.\u003c\/strong\u003e Load banks are quoted to the configuration and the site. Use Add to Quote on this page and we will come back to you with a price.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul style=\"list-style-position: outside; padding-left: 1.5em; margin-left: 0;\"\u003e\n\u003cli\u003eAutomatic 0-400 kW resistive load bank\u003c\/li\u003e\n\u003cli\u003eContinuous duty rating at 415V, 50\/60 Hz, power factor 1\u003c\/li\u003e\n\u003cli\u003eSmart control panel maintains optimum generator load automatically\u003c\/li\u003e\n\u003cli\u003eHelps prevent wet-stacking and cylinder glazing\u003c\/li\u003e\n\u003cli\u003eRated for ambient temperatures up to 50°C\u003c\/li\u003e\n\u003cli\u003eCan be installed permanently indoors or outdoors\u003c\/li\u003e\n\u003cli\u003eSuited to mining camps, data centres, telecoms, defence, pump stations\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1290 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (L x W x H):\u003c\/strong\u003e 241 x 176 x 193 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Outdoor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAirflow:\u003c\/strong\u003e 8.5 m³\/s\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminals per phase:\u003c\/strong\u003e 2 x M12\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplay:\u003c\/strong\u003e 7-inch HMI instrument display\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElements:\u003c\/strong\u003e Stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Galvanised steel canopy and galvanised skid base\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandling:\u003c\/strong\u003e Top lift with fork pockets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSound level:\u003c\/strong\u003e 82 dBA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSupplied through Genelite and supported Australia-wide by Gen4Sale, an Authorised Genelite Master Dealer.\u003c\/p\u003e","brand":"Genelite","offers":[{"title":"Default Title","offer_id":46168924913855,"sku":"GLB-400","price":0.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/7409\/5295\/files\/250-800kW-auto-load-bank_129b8b81-f9b3-41b3-8ae8-5bb360adfc8b.jpg?v=1788916895"},{"product_id":"pdl-500-kw","title":"500kW Genelite Load Bank PDL-500","description":"\u003cp\u003eThe PDL-500 is a manual resistive dummy load bank with a rated load of 0 to 500 kW at 415 V and 50 or 60 Hz. Duty is continuous. Its elements are low-heat-emitting, metal-sheathed and finned, made from high-grade nickel resistance wire in U-type form, and built-in industrial blowers cool the unit.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSwitches add load in increments, and a rheostat provides variable load settings between them.\u003c\/li\u003e\n\u003cli\u003eThe industrial fan blowers can run from the load bank's own power or from an external supply.\u003c\/li\u003e\n\u003cli\u003eHeavy-duty casters are fitted for mobility during generator testing, so the unit can be positioned beside the set.\u003c\/li\u003e\n\u003cli\u003eEye hooks on top allow the unit to be lifted with suitable lifting equipment.\u003c\/li\u003e\n\u003cli\u003eTest AC voltage may fluctuate by ±15% at 50 Hz or 60 Hz.\u003c\/li\u003e\n\u003cli\u003eLoad cables connect through a terminal block for convenient termination.\u003c\/li\u003e\n\u003cli\u003eThe NEMA Type 1 enclosure is for indoor use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat it is for\u003c\/h3\u003e\n\u003cp\u003eThe PDL-500 is built for generator load testing. A dummy load converts the set's output into heat, so a generator can be run at a known load while it is checked. The load is resistive, so it applies real power (kW) rather than reactive load, and the rating should be matched to the generator's kW output (kVA multiplied by power factor). Plan for indoor use under cover, and have a licensed electrician make the load cable connections. Tell us the generator's make, model and rating and we will help with sizing.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1200 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (L x W x H):\u003c\/strong\u003e 127 x 157 x 147 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated load:\u003c\/strong\u003e 0 to 500 kW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType of load:\u003c\/strong\u003e Resistive\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDuty:\u003c\/strong\u003e Continuous\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated voltage:\u003c\/strong\u003e 415V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated frequency:\u003c\/strong\u003e 50 Hz \/ 60 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation:\u003c\/strong\u003e Manual\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e NEMA 1 (indoor)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage tolerance:\u003c\/strong\u003e ±15% at 50 Hz or 60 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElements:\u003c\/strong\u003e Metal-sheathed, finned, high-grade nickel resistance wire (U-type)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling:\u003c\/strong\u003e Built-in industrial blowers, internally or externally powered\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSupplied through Genelite and supported Australia-wide by Gen4Sale, an Authorised Genelite Master Dealer.\u003c\/p\u003e","brand":"Genelite","offers":[{"title":"Default Title","offer_id":46168924946623,"sku":"PDL-500","price":28289.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/7409\/5295\/files\/pdl-load-bank_6e282615-25c0-4d66-9fe9-6cde8f4451db.jpg?v=1788916897"},{"product_id":"glb-550-kw","title":"550kW Genelite Load Bank GLB-550","description":"\u003cp\u003eThe GLB-550 is an automatic resistive load bank rated 0 to 550 kW for continuous duty at 415 V, 50 or 60 Hz and a power factor of 1. It can be installed permanently indoors or outdoors and is rated for ambient temperatures up to 50°C.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTwelve load steps, from 1 kW to 125 kW, take a generator up to 550 kW in fine increments.\u003c\/li\u003e\n\u003cli\u003eThe control panel applies load to the connected generator automatically to keep it running efficiently and to help avoid wet stacking and cylinder glazing.\u003c\/li\u003e\n\u003cli\u003eLoad cables connect at two M12 terminals per phase.\u003c\/li\u003e\n\u003cli\u003eStainless steel elements sit in a galvanised steel canopy on a galvanised skid base.\u003c\/li\u003e\n\u003cli\u003eFork pockets and a top lift are provided for positioning the unit with suitable lifting equipment.\u003c\/li\u003e\n\u003cli\u003eA 7-inch HMI instrument display sits at the control panel.\u003c\/li\u003e\n\u003cli\u003eThe design is aimed at Australian conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat it is for\u003c\/h3\u003e\n\u003cp\u003eThe GLB-550 is for sites that need to maintain minimum generator loads and test generators on site: mining camps, data centres, commercial buildings and telecommunications facilities, as well as essential services, defence and pump stations. The load is resistive, so it applies real power (kW) and no reactive load. Choose the rating from the generator's kW output (kVA multiplied by power factor), and have a licensed electrician connect the load cables. Send us your generator's make, model and rating and we will help with sizing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrice on application.\u003c\/strong\u003e Each load bank is quoted to your configuration and site. Use Add to Quote on this page and we will come back to you with a price.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul style=\"list-style-position: outside; padding-left: 1.5em; margin-left: 0;\"\u003e\n\u003cli\u003eAutomatic load bank rated 0-550 kW\u003c\/li\u003e\n\u003cli\u003eResistive load type, continuous duty\u003c\/li\u003e\n\u003cli\u003e415V output at 50\/60 Hz, power factor of 1\u003c\/li\u003e\n\u003cli\u003eRated for ambient temperatures up to 50°C\u003c\/li\u003e\n\u003cli\u003eCan be permanently installed indoors or outdoors\u003c\/li\u003e\n\u003cli\u003eAutomatically maintains optimum generator load to help prevent wet-stacking and cylinder glazing\u003c\/li\u003e\n\u003cli\u003eMarketed for mining camps, data centres, telecoms, defence and pump-station use\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1290 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (L x W x H):\u003c\/strong\u003e 241 x 176 x 193 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Outdoor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad steps:\u003c\/strong\u003e 1 \/ 2 \/ 2 \/ 5 \/ 10 \/ 10 \/ 20 \/ 50 \/ 100 \/ 100 \/ 125 \/ 125 kW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAirflow:\u003c\/strong\u003e 8.5 m³\/s\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminals per phase:\u003c\/strong\u003e 2 x M12\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplay:\u003c\/strong\u003e 7-inch HMI instrument display\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElements:\u003c\/strong\u003e Stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Galvanised steel canopy and galvanised skid base\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandling:\u003c\/strong\u003e Top lift with fork pockets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSound level:\u003c\/strong\u003e 78 dBA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSupplied through Genelite and supported Australia-wide by Gen4Sale, an Authorised Genelite Master Dealer.\u003c\/p\u003e","brand":"Genelite","offers":[{"title":"Default Title","offer_id":46168924979391,"sku":"GLB-550","price":0.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/7409\/5295\/files\/250-800kW-auto-load-bank_16aa83bb-9ec0-4a06-adf2-4ba25e978792.jpg?v=1788916900"},{"product_id":"glb-660-kw","title":"660kW Genelite Load Bank GLB-660","description":"\u003cp\u003eThe GLB-660 is an automatic resistive load bank rated for continuous duty at 415 V and 50 or 60 Hz, with a load range of 0 to 660 kW and a power factor of 1. It is built for permanent installation indoors or outdoors and for ambient temperatures up to 50°C.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNine load steps, from 15 kW to 135 kW, build the load on a generator up to 660 kW.\u003c\/li\u003e\n\u003cli\u003eThe control panel loads the connected generator automatically to help prevent wet stacking and cylinder glazing.\u003c\/li\u003e\n\u003cli\u003eLoad cables connect at two M12 terminals per phase.\u003c\/li\u003e\n\u003cli\u003eStainless steel elements are housed in a galvanised steel canopy on a galvanised skid base.\u003c\/li\u003e\n\u003cli\u003eFork pockets and a top lift are provided for positioning the unit with suitable lifting equipment.\u003c\/li\u003e\n\u003cli\u003eA 7-inch HMI instrument display sits at the control panel.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat it is for\u003c\/h3\u003e\n\u003cp\u003eMine camps, data centres and telecommunications facilities are typical sites for the GLB-660, along with commercial buildings, essential services, defence and pump stations. It maintains a minimum load on a generator and supports on-site testing. Wet stacking is unburnt fuel building up in the exhaust of a diesel engine run on light load, and a load bank gives the set something to work against. Choose the rating from the generator's kW output (kVA multiplied by power factor), and leave the cable connection to a licensed electrician. Send us your generator's make, model and rating and we will help with sizing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrice on application.\u003c\/strong\u003e Load banks are quoted to the configuration and the site. Use Add to Quote on this page and we will come back to you with a price.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul style=\"list-style-position: outside; padding-left: 1.5em; margin-left: 0;\"\u003e\n\u003cli\u003eAutomatic load bank rated 0-660 kW\u003c\/li\u003e\n\u003cli\u003eResistive load type, continuous duty\u003c\/li\u003e\n\u003cli\u003e415V output at 50\/60 Hz, power factor of 1\u003c\/li\u003e\n\u003cli\u003eRated for ambient temperatures up to 50°C\u003c\/li\u003e\n\u003cli\u003eCan be permanently installed indoors or outdoors\u003c\/li\u003e\n\u003cli\u003eAutomatically maintains optimum generator load to help prevent wet-stacking and cylinder glazing\u003c\/li\u003e\n\u003cli\u003eMarketed for mining camps, data centres, telecoms, defence and pump-station use\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1740 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (L x W x H):\u003c\/strong\u003e 254 x 196 x 193 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Outdoor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad steps:\u003c\/strong\u003e 15 \/ 15 \/ 30 \/ 45 \/ 60 \/ 120 \/ 120 \/ 120 \/ 135 kW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAirflow:\u003c\/strong\u003e 9.8 m³\/s\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminals per phase:\u003c\/strong\u003e 2 x M12\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplay:\u003c\/strong\u003e 7-inch HMI instrument display\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElements:\u003c\/strong\u003e Stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Galvanised steel canopy and galvanised skid base\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandling:\u003c\/strong\u003e Top lift with fork pockets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSound level:\u003c\/strong\u003e 89 dBA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSupplied through Genelite and supported Australia-wide by Gen4Sale, an Authorised Genelite Master Dealer.\u003c\/p\u003e","brand":"Genelite","offers":[{"title":"Default Title","offer_id":46168925012159,"sku":"GLB-660","price":0.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/7409\/5295\/files\/250-800kW-auto-load-bank_c778d2d8-8a1e-4561-8111-2856a7630168.jpg?v=1790503593"},{"product_id":"glb-800-kw","title":"800kW Genelite Load Bank GLB-800","description":"\u003cp\u003eThe GLB-800 is an 800 kW automatic resistive load bank for continuous duty at 415 V, 50 or 60 Hz and a power factor of 1. It is designed for permanent installation indoors or outdoors and is rated to operate in ambient temperatures up to 50°C.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe control panel loads the connected generator automatically, which helps prevent wet stacking and cylinder glazing.\u003c\/li\u003e\n\u003cli\u003eLoad cables connect at two M12 terminals per phase.\u003c\/li\u003e\n\u003cli\u003eStainless steel elements sit in a galvanised steel canopy on a galvanised skid base, in a design aimed at Australian conditions.\u003c\/li\u003e\n\u003cli\u003eFork pockets and a top lift are provided for positioning the unit with suitable lifting equipment.\u003c\/li\u003e\n\u003cli\u003eA 7-inch HMI instrument display sits at the control panel.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat it is for\u003c\/h3\u003e\n\u003cp\u003eThe GLB-800 is for sites that routinely need to maintain minimum loads on standby generators or run on-site tests, including mining camps, data centres, commercial buildings, telecommunications, essential services, defence and pump stations. A resistive load bank applies real power (kW) and no reactive load, so size it from the generator's kW output (kVA multiplied by power factor). Installation and cable connection should be done by a licensed electrician. Send us your generator's make, model and rating and we will help you choose.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrice on application.\u003c\/strong\u003e Each load bank is quoted to your configuration and site. Use Add to Quote on this page and we will come back to you with a price.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul style=\"list-style-position: outside; padding-left: 1.5em; margin-left: 0;\"\u003e\n\u003cli\u003eAutomatic load bank rated 0-800 kW\u003c\/li\u003e\n\u003cli\u003eResistive load type, continuous duty\u003c\/li\u003e\n\u003cli\u003e415V output at 50\/60 Hz, power factor of 1\u003c\/li\u003e\n\u003cli\u003eRated for ambient temperatures up to 50°C\u003c\/li\u003e\n\u003cli\u003eCan be permanently installed indoors or outdoors\u003c\/li\u003e\n\u003cli\u003eAutomatically maintains optimum generator load to help prevent wet-stacking and cylinder glazing\u003c\/li\u003e\n\u003cli\u003eMarketed for mining camps, data centres, telecoms, defence and pump-station use\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2620 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (L x W x H):\u003c\/strong\u003e 254 x 196 x 193 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Outdoor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAirflow:\u003c\/strong\u003e 12 m³\/s\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminals per phase:\u003c\/strong\u003e 2 x M12\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplay:\u003c\/strong\u003e 7-inch HMI instrument display\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElements:\u003c\/strong\u003e Stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Galvanised steel canopy and galvanised skid base\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandling:\u003c\/strong\u003e Top lift with fork pockets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSound level:\u003c\/strong\u003e 92 dBA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSupplied through Genelite and supported Australia-wide by Gen4Sale, an Authorised Genelite Master Dealer.\u003c\/p\u003e","brand":"Genelite","offers":[{"title":"Default Title","offer_id":46168925044927,"sku":"GLB-800","price":0.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/7409\/5295\/files\/250-800kW-auto-load-bank_9c325cf4-e0ca-4c78-84fa-6fa2e440588b.jpg?v=1788916901"},{"product_id":"5-2kva-5rmp-1030a-cummins-rmp","title":"5.2kVA Cummins RMP Diesel Generator 5RMP-1030A","description":"\u003cp\u003eThe 5RMP-1030A is a Cummins RMP (Rugged Mobile Power) diesel generator set for military use. It is rated at 5.2kVA at 50Hz and designed to the MIL-DTL-32496 military specification.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMulti-fuel operation on JP-8, JP-4, DF-1, DF-2 and DF-A means the set is not tied to a single fuel grade.\u003c\/li\u003e\n\u003cli\u003e24-volt starting with a NATO slave connection allows a start from another 24-volt source.\u003c\/li\u003e\n\u003cli\u003eAutomatic two-button paralleling lets sets run together and share a load.\u003c\/li\u003e\n\u003cli\u003eBuilt-in diagnostics and prognostics support maintenance by showing the condition of the set.\u003c\/li\u003e\n\u003cli\u003eA low infrared signature makes the set harder to detect with infrared sensing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat it will run\u003c\/h3\u003e\n\u003cp\u003eAt 5.2kVA, this set typically suits a small group of loads: lighting, a fridge, battery charging and small power tools. Motors and compressors can draw several times their running current at start, so allow headroom for the largest one. Check the compliance plate on each appliance for its running and starting load, then add them up. Where the set feeds fixed wiring, connection is through a changeover switch installed by a licensed electrician. Send us your load list along with the voltage and phase you need, and we will help with sizing.\u003c\/p\u003e\n\u003cp\u003eThe 5RMP-1030A suits defence and military power supply, and other applications that need a small multi-fuel set designed to MIL-DTL-32496.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrice on application.\u003c\/strong\u003e This set is quoted to your configuration and requirements. Use Add to Quote on this page and we will come back to you with a price.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul style=\"list-style-position: outside; padding-left: 1.5em; margin-left: 0;\"\u003e\n\u003cli\u003eCummins Onan RMP model 5RMP-1030A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput (prime):\u003c\/strong\u003e 5.2kVA @ 50Hz; 5kW @ 60Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards:\u003c\/strong\u003e Designed to MIL-DTL-32496; electromagnetic compatibility to MIL-STD-461F; radio frequency emissions MIL-STD-2169; NATO STANAG 4135\u003c\/li\u003e\n\u003cli\u003eMulti-fuel capable (JP-8, JP-4, DF-1, DF-2, DF-A)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel consumption:\u003c\/strong\u003e 1.62 L\/h at 100% load\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel tank:\u003c\/strong\u003e 8 hours fuel tank with auxiliary fuel connections\u003c\/li\u003e\n\u003cli\u003e24V starting with NATO slave connection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery charging alternator:\u003c\/strong\u003e 45 A\u003c\/li\u003e\n\u003cli\u003eLow infrared and noise signature\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise level:\u003c\/strong\u003e 68 dB(A) @ 7m at full load\u003c\/li\u003e\n\u003cli\u003eAutomatic two-button paralleling\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController:\u003c\/strong\u003e RMP Advanced Digital Control System (AdvDCS) with Masterless Load Demand (MLD)\u003c\/li\u003e\n\u003cli\u003eBuilt-in diagnostics\/prognostics\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlternator:\u003c\/strong\u003e YD-6060-5: brushless, 4 pole synchronous, 2\/3 pitch stator, two bearing rotor, Class F and H insulation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhase \/ voltage (50Hz):\u003c\/strong\u003e 120V single phase @ 43A; 120\/240V single phase @ 22A; 120\/208V three phase @ 14A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhase \/ voltage (60Hz):\u003c\/strong\u003e 120V single phase @ 52A; 120\/240V single phase @ 26A; 120\/208V three phase @ 17A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower factor:\u003c\/strong\u003e Operates between 0.8 lagging and 1.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage regulation:\u003c\/strong\u003e ±3% of rated voltage, no load to full load\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWaveform distortion (THDV):\u003c\/strong\u003e Less than 5% no load to full linear load; less than 3% for any single harmonic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRating basis:\u003c\/strong\u003e Prime: maximum power at a variable load for an unlimited number of hours; 10% overload available for a limited time\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating temperature:\u003c\/strong\u003e -45°C to 57°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 355 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (L x W x H):\u003c\/strong\u003e 114.8 x 81.6 x 91.8 cm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSupplied through Genelite and supported Australia-wide by Gen4Sale, an Authorised Genelite Master Dealer.\u003c\/p\u003e","brand":"Genelite","offers":[{"title":"Default Title","offer_id":46168929697983,"sku":"5RMP-1030A","price":0.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/7409\/5295\/files\/AMMPS-5kw-Power-Unit-2-1200x1200-1.png?v=1788916830"},{"product_id":"5-5kva-gkd5500-defence","title":"5.5kVA (3.5kW) Genelite Defence Diesel Generator GKD5500","description":"\u003cp\u003eThe GKD5500 is a single phase Genelite Defence diesel generator set rated at 5.5kVA \/ 3.5kW and powered by a Kubota Z482 engine.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIt is custom-built for military and defence applications, so it is a purpose-designed option for defence users.\u003c\/li\u003e\n\u003cli\u003eA low noise signature suits applications where noise needs to be kept down.\u003c\/li\u003e\n\u003cli\u003eBuilt-in diagnostics and prognostics give the operator information on the condition of the set to support maintenance.\u003c\/li\u003e\n\u003cli\u003eSingle phase output covers general power circuits for lighting, tools and small equipment.\u003c\/li\u003e\n\u003cli\u003eFuel consumption is 2.4 litres an hour at 100% load and 1.9 litres an hour at 75% load, so running costs are easy to estimate.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAt those rates, every 100 litres of fuel runs the set for about 42 hours at full load or about 53 hours at 75% load.\u003c\/p\u003e\n\u003ch3\u003eWhat it will run\u003c\/h3\u003e\n\u003cp\u003eAt 3.5kW, which is about 15A at 240V, the GKD5500 typically suits a small group of single phase loads: lighting, a fridge, small power tools and battery chargers. Motors and compressors can draw several times their running current at start, so allow headroom for the largest one. Check the compliance plate on each appliance for its running and starting load, then add them up. Where the set feeds fixed wiring, connection is through a changeover switch installed by a licensed electrician. Send us your load list and we will help with sizing.\u003c\/p\u003e\n\u003cp\u003eThe GKD5500 suits defence and military power supply, and any site that needs a modest single phase supply from a diesel set.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrice on application.\u003c\/strong\u003e This set is quoted to your configuration and requirements. Use Add to Quote on this page and we will come back to you with a price.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul style=\"list-style-position: outside; padding-left: 1.5em; margin-left: 0;\"\u003e\n\u003cli\u003eKubota Diesel Z482 engine\u003c\/li\u003e\n\u003cli\u003e5.5kVA \/ 3.5kW prime power output\u003c\/li\u003e\n\u003cli\u003eFuel consumption 2.4 L\/hr at 100% load, 1.9 L\/hr at 75% load\u003c\/li\u003e\n\u003cli\u003eCustom-built for military\/defence applications\u003c\/li\u003e\n\u003cli\u003eLow noise signature\u003c\/li\u003e\n\u003cli\u003eBuilt-in diagnostics\/prognostics\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 235 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (L x W x H):\u003c\/strong\u003e 106.6 x 61.8 x 69.8 cm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSupplied through Genelite and supported Australia-wide by Gen4Sale, an Authorised Genelite Master Dealer.\u003c\/p\u003e","brand":"Genelite","offers":[{"title":"Default Title","offer_id":46168929796287,"sku":"GKD5500","price":0.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/7409\/5295\/files\/GKD5500-1200x1200-1.png?v=1788916830"},{"product_id":"8kva-gkd8000-defence","title":"8kVA (6.4kW) Genelite Defence Diesel Generator GKD8000","description":"\u003cp\u003eThe GKD8000 is a single phase diesel generator rated 8kVA \/ 6.4kW. It is powered by a Kubota diesel engine and custom-built for military applications.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNoise reduction measures include quieter cooling fans, a second muffler and noise-absorbing ducts, all aimed at a reduced noise signature.\u003c\/li\u003e\n\u003cli\u003eBuilt-in diagnostics and prognostics help identify faults and plan maintenance.\u003c\/li\u003e\n\u003cli\u003eFuel consumption is 3.3 litres an hour at full load and 2.5 litres an hour at 75% load, so running costs can be estimated for your own duty.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat it will run\u003c\/h3\u003e\n\u003cp\u003eAt 6.4kW the GKD8000 works out to about 27A of single phase current (watts divided by 240). That suits a modest group of loads such as lighting, small power tools and a pump, provided they are not all starting at once. Motors in pumps and compressors can draw several times their running current as they start, so allow headroom for your largest motor. Check the compliance plate on each item for its running and starting power, then add them up. Where the set will feed fixed wiring, connection should go through a changeover switch installed by a licensed electrician. Send us your load list and we will help with sizing.\u003c\/p\u003e\n\u003cp\u003eThe GKD8000 suits defence and military applications, field command and communications sites, workshops and remote or temporary sites that need single phase power.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrice on application.\u003c\/strong\u003e Each set is quoted to its configuration, options and intended use. Use Add to Quote on this page and we will come back to you with a price.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul style=\"list-style-position: outside; padding-left: 1.5em; margin-left: 0;\"\u003e\n\u003cli\u003eCustom-built for military applications\u003c\/li\u003e\n\u003cli\u003eKubota diesel engine\u003c\/li\u003e\n\u003cli\u003eFuel consumption: 3.3L\/hr at 100% load, 2.5L\/hr at 75% load\u003c\/li\u003e\n\u003cli\u003eQuieter cooling fans, second muffler, noise-absorbing ducts\u003c\/li\u003e\n\u003cli\u003eBuilt-in diagnostics\/prognostics\u003c\/li\u003e\n\u003cli\u003eDesigned for battlefield mobility with reduced noise signature\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 295 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (L x W x H):\u003c\/strong\u003e 128.1 x 61.8 x 69.8 cm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSupplied through Genelite and supported Australia-wide by Gen4Sale, an Authorised Genelite Master Dealer.\u003c\/p\u003e","brand":"Genelite","offers":[{"title":"Default Title","offer_id":46168930779327,"sku":"GKD8000","price":0.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/7409\/5295\/files\/GKD5500-1200x1200-1_184b6a57-0096-455c-ad02-833ff1df6e4c.png?v=1788916842"},{"product_id":"gs009-ett-s","title":"10.1kVA Isuzu Diesel Generator GS009-ETT-S","description":"\u003cp\u003eThe GS009-ETT-S is a single phase diesel generator set rated at 9.2kVA prime and 10.1kVA standby (9.2kW and 10.1kW at a power factor of 1.0), supplying 240V at 50Hz. It is powered by an Isuzu 3TNV70, a three cylinder, water-cooled, four-cycle diesel running at 3000rpm, and drives a brushless alternator with AVR. Starting is electric, and a Mecc Alte GC250 controller provides manual or auto start with 2-wire remote start.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSocket and hardwire operating modes let the same set supply loads plugged into its sockets or a fixed installation connected by hardwire.\u003c\/li\u003e\n\u003cli\u003eAutomatic MEN switching is built in, so the multiple earthed neutral link is handled by the set.\u003c\/li\u003e\n\u003cli\u003eLow oil pressure and high coolant temperature shutdowns protect the engine, while over current, over and under voltage and over and under frequency protection and a shunt-trip main circuit breaker protect the generator.\u003c\/li\u003e\n\u003cli\u003eThe GC250 controller measures voltage, current, frequency, power, engine speed and running hours, which helps with load checks and service planning.\u003c\/li\u003e\n\u003cli\u003e2-wire remote start lets an external switch or controller start the set without anyone at the unit.\u003c\/li\u003e\n\u003cli\u003eA sound-attenuated enclosure reduces the noise the set makes in operation.\u003c\/li\u003e\n\u003cli\u003eA single centre lift point and four-point base mounting, with or without fork pockets, let the set be positioned with lifting equipment and fixed in place.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe 40 litre tank gives about 10.5 hours of running at the prime rating, where consumption is about 3.7 litres an hour. Total harmonic distortion is 4% at no load and 7% at full load.\u003c\/p\u003e\n\u003ch3\u003eWhat it will run\u003c\/h3\u003e\n\u003cp\u003eAt 9.2kVA prime and 10.1kVA standby, the GS009-ETT-S typically suits worksite and workshop loads such as lighting, power tools, a pump or compressor and a few circuits of a small building. At 240V, the prime rating is about 38A and the standby rating about 42A (watts divided by 240). Motors in pumps, compressors and air conditioners draw several times their running current at start, so allow headroom for the largest motor. Check the compliance plate on each appliance for its running and starting watts, then add them up. For building backup, connect through an inlet and changeover switch installed by a licensed electrician. Send us your load list and we will help you size it.\u003c\/p\u003e\n\u003cp\u003eThe GS009-ETT-S suits worksites, workshops, rural properties and small commercial premises that need 240V single phase power, including as standby supply for a building.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrice on application.\u003c\/strong\u003e This set is quoted to suit your configuration and site requirements. Use Add to Quote on this page and we will come back to you with a price.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul style=\"list-style-position: outside; padding-left: 1.5em; margin-left: 0;\"\u003e\n\u003cli\u003eDiesel generator, Isuzu 3TNV70 engine, made in Japan\u003c\/li\u003e\n\u003cli\u003eBrushless AVR alternator\u003c\/li\u003e\n\u003cli\u003e9.2kVA prime \/ 10.1kVA standby rating\u003c\/li\u003e\n\u003cli\u003e40 litre fuel tank\u003c\/li\u003e\n\u003cli\u003eSound-attenuated enclosure\u003c\/li\u003e\n\u003cli\u003eSocket and hardwire operating modes, remote-start capable\u003c\/li\u003e\n\u003cli\u003eAutomatic MEN switching and engine\/generator protection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 436 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (L x W x H):\u003c\/strong\u003e 130 x 64 x 84 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated output (kW):\u003c\/strong\u003e 9.2kW prime \/ 10.1kW standby\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage and frequency:\u003c\/strong\u003e 240V AC, 50Hz, single phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower factor:\u003c\/strong\u003e 1.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine type:\u003c\/strong\u003e Water-cooled, 4-cycle diesel, 3 cylinders, 0.854L\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine speed:\u003c\/strong\u003e 3000rpm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStarting:\u003c\/strong\u003e Electric start, 12V 20A charging system\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal harmonic distortion:\u003c\/strong\u003e 4% at no load, 7% at full load\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel consumption at prime rating:\u003c\/strong\u003e 3.7 L\/h (approx.)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRun time at prime rating:\u003c\/strong\u003e 10.5 hours (approx.)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController:\u003c\/strong\u003e Mecc Alte GC250, manual or auto start, 2-wire remote start\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection:\u003c\/strong\u003e Low oil pressure and high coolant temperature shutdown; over current, over and under voltage, over and under frequency; shunt-trip main circuit breaker\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLift point and mounting:\u003c\/strong\u003e Single centre lift point, four-point base mounting (with or without fork pockets)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSupplied through Genelite and supported Australia-wide by Gen4Sale, an Authorised Genelite Master Dealer.\u003c\/p\u003e","brand":"Genelite","offers":[{"title":"Default Title","offer_id":46168930975935,"sku":"GS009-ETT-S","price":0.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/7409\/5295\/files\/GS009-ETT-S-1.jpg?v=1788916844"},{"product_id":"10-4kva-10kw-10rmp-1040a-cummins-rmp","title":"10.4kVA (10kW) Cummins RMP Diesel Generator 10RMP-1040A","description":"\u003cp\u003eThe 10RMP-1040A is a Cummins Rugged Mobile Power (RMP) diesel generator set rated at 10.4kVA (10kW). It is built to the MIL-DTL-32496 military standard and starts on a 24 volt system with a NATO slave connection.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMulti-fuel capability lets the set run on JP-8, JP-4, DF-1, DF-2 or DF-A, so it is not tied to a single fuel grade.\u003c\/li\u003e\n\u003cli\u003eThe NATO slave connection allows the set to be started from an external 24 volt source, such as a vehicle.\u003c\/li\u003e\n\u003cli\u003eAutomatic synchronisation and two-button paralleling let the set run alongside other compatible sets and share the load with them.\u003c\/li\u003e\n\u003cli\u003eBuilt-in diagnostics and prognostics help identify faults and developing problems, which supports maintenance planning.\u003c\/li\u003e\n\u003cli\u003eA low infrared and noise signature suits operations where the set needs to be less conspicuous.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat it will run\u003c\/h3\u003e\n\u003cp\u003eAt 10.4kVA (10kW), the 10RMP-1040A typically suits lighting, workshop tools and small motors. Add up the running loads, then check the starting current of your largest motor, found on its compliance plate, against the set's rating. Send us your load list, including the voltage and phase your equipment needs, and we will help with sizing.\u003c\/p\u003e\n\u003cp\u003eThe 10RMP-1040A suits defence and government field power, command and communications posts, and remote sites that call for a set built to a military standard.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrice on application.\u003c\/strong\u003e This set is quoted to suit the configuration and the project it will serve. Use Add to Quote on this page and we will come back to you with a price.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul style=\"list-style-position: outside; padding-left: 1.5em; margin-left: 0;\"\u003e\n\u003cli\u003eCummins Rugged Mobile Power (RMP) generator, 10.4kVA\/10kW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower rating:\u003c\/strong\u003e 10.4kVA at 50Hz; 10kW at 60Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency:\u003c\/strong\u003e 50\/60Hz\u003c\/li\u003e\n\u003cli\u003eBuilt to MIL-DTL-32496 military standard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElectromagnetic compatibility:\u003c\/strong\u003e MIL-STD-461F\u003c\/li\u003e\n\u003cli\u003eMulti-fuel capable: JP-8, JP-4, DF-1, DF-2, DF-A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel consumption:\u003c\/strong\u003e 2.84 L\/h at 100% rated load (60Hz)\u003c\/li\u003e\n\u003cli\u003e24 volt starting with NATO slave connection\u003c\/li\u003e\n\u003cli\u003eAutomatic synchronisation, two-button paralleling\u003c\/li\u003e\n\u003cli\u003eBuilt-in diagnostics\/prognostics\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl system:\u003c\/strong\u003e Advanced Digital Control System (ADCS), with networking and automatic start and stop\u003c\/li\u003e\n\u003cli\u003eLow infrared and noise signature\u003c\/li\u003e\n\u003cli\u003eFree fuel and oil filter kit included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 458 kg (dry)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (L x W x H):\u003c\/strong\u003e 140.3 x 81.6 x 91.8 cm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSupplied through Genelite and supported Australia-wide by Gen4Sale, an Authorised Genelite Master Dealer.\u003c\/p\u003e","brand":"Genelite","offers":[{"title":"Default Title","offer_id":46168931008703,"sku":"10RMP-1040A","price":0.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/7409\/5295\/files\/AMMPS-5kw-Power-Unit-2-1200x1200-1_4dedda81-8ac6-4246-8ea7-2850bd924410.png?v=1788916845"},{"product_id":"11-8kva-11-8kw-gkd11s-defence","title":"11.8kVA (11.8kW) Genelite Defence Diesel Generator GKD11S","description":"\u003cp\u003eThe GKD11S is a military-spec Genelite Defence diesel generator rated at 11.8kVA (11.8kW) and powered by a Kubota diesel engine.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eQuieter cooling fans, secondary mufflers and noise-absorbing ducts work together to reduce the noise the set produces.\u003c\/li\u003e\n\u003cli\u003eThe low noise signature suits applications where the set needs to be less conspicuous.\u003c\/li\u003e\n\u003cli\u003eBuilt-in diagnostics and prognostics help identify faults and developing problems, which supports maintenance planning.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat it will run\u003c\/h3\u003e\n\u003cp\u003eAt 11.8kVA (11.8kW), the GKD11S typically suits field workshops, command and communications posts, site lighting and general power for small equipment. Motors draw several times their running current as they start, so find the starting figure on each compliance plate and check it against the set's rating. Send us your load list, including the voltage and phase your equipment needs, and we will help with sizing.\u003c\/p\u003e\n\u003cp\u003eThe GKD11S suits defence and government field power, communications and command posts, and other sites that need a military-spec diesel set with noise-reduction features.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrice on application.\u003c\/strong\u003e Defence sets are quoted to suit the configuration and project requirements. Use Add to Quote on this page and we will come back to you with a price.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul style=\"list-style-position: outside; padding-left: 1.5em; margin-left: 0;\"\u003e\n\u003cli\u003eMilitary-spec diesel generator, 11.8kVA\/11.8kW\u003c\/li\u003e\n\u003cli\u003eQuality Kubota diesel engine\u003c\/li\u003e\n\u003cli\u003eDesigned for battlefield mobility and low noise signature\u003c\/li\u003e\n\u003cli\u003eQuieter cooling fans, secondary mufflers, noise-absorbing ducts\u003c\/li\u003e\n\u003cli\u003eBuilt-in diagnostics\/prognostics\u003c\/li\u003e\n\u003cli\u003eFree fuel and oil filter kit included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSupplied through Genelite and supported Australia-wide by Gen4Sale, an Authorised Genelite Master Dealer.\u003c\/p\u003e","brand":"Genelite","offers":[{"title":"Default Title","offer_id":46168931205311,"sku":"GKD11S","price":0.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/7409\/5295\/files\/GKD-defence-1200x1200-1.png?v=1788916848"},{"product_id":"gs012-ett","title":"13.3kVA Isuzu Diesel Generator GS012-ETT","description":"\u003cp\u003eThe GS012-ETT is a three phase diesel generator set rated at 12.1kVA prime and 13.3kVA standby at 415V and 50Hz (about 9.7kW prime and 10.6kW standby at its power factor of 0.8). It is powered by a Japanese-made Isuzu 3TNV70, a three cylinder, water-cooled, four-cycle diesel running at 3000rpm, and the alternator is brushless with AVR. Starting is electric, with a Mecc Alte GC250 controller offering manual or auto start and 2-wire remote start.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThree 15A 240V single phase sockets and one 20A 415V three phase socket let the set run single phase and three phase equipment directly, with individual RCBO protection on the sockets.\u003c\/li\u003e\n\u003cli\u003eSocket and hardwire operating modes, with automatic MEN management, let the set either feed its own sockets or connect to a fixed installation.\u003c\/li\u003e\n\u003cli\u003eTotal harmonic distortion of 3.5% at no load and 2.5% at full load gives a clean waveform that suits electronic equipment as well as motors.\u003c\/li\u003e\n\u003cli\u003eLow oil pressure and high coolant temperature shutdowns protect the engine, while over current, over and under voltage and frequency protection and a shunt-trip main circuit breaker protect the generator.\u003c\/li\u003e\n\u003cli\u003eThe GC250 controller measures voltage, current, frequency, power, engine speed and running hours, and 2-wire remote start lets an external switch start the set.\u003c\/li\u003e\n\u003cli\u003eA heavy-duty air cleaner, dual-stage fuel filtration and a 250 hour service interval protect the engine and keep servicing on a clear schedule.\u003c\/li\u003e\n\u003cli\u003eA sound-attenuated enclosure reduces operating noise, and an emergency stop and lockable battery isolator are fitted for safe shutdown and servicing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAt the prime rating the set uses about 3.7 litres an hour, and the 40 litre tank gives about 10.5 hours of running.\u003c\/p\u003e\n\u003ch3\u003eWhat it will run\u003c\/h3\u003e\n\u003cp\u003eAt 12.1kVA prime and 13.3kVA standby, the GS012-ETT typically suits small workshops, site compounds and farm sheds with a mix of single phase and three phase loads, such as lighting, power tools, pumps and compressors. Spread single phase loads across the three phases and allow headroom for motor starting, because pumps, compressors and air conditioners can draw several times their running current at start. Check the compliance plate on each machine for its running and starting watts. Hardwire connection, including an inlet and changeover switch for building backup, must be done by a licensed electrician. Send us your load list and we will help you size it.\u003c\/p\u003e\n\u003cp\u003eThe GS012-ETT suits workshops, farms, small commercial premises and temporary power for construction and maintenance work that needs single phase and three phase supply from one set.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrice on application.\u003c\/strong\u003e The price depends on the configuration, options and site, so this set is quoted individually. Use Add to Quote on this page and we will come back to you with a price.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul style=\"list-style-position: outside; padding-left: 1.5em; margin-left: 0;\"\u003e\n\u003cli\u003e12.1kVA prime \/ 13.3kVA standby, three-phase output\u003c\/li\u003e\n\u003cli\u003eIsuzu 3TNV70 diesel engine (Japanese-made)\u003c\/li\u003e\n\u003cli\u003eBrushless AVR alternator\u003c\/li\u003e\n\u003cli\u003e40 litre fuel tank\u003c\/li\u003e\n\u003cli\u003eSound-attenuated enclosure\u003c\/li\u003e\n\u003cli\u003eFlexible socket and hardwire operating modes\u003c\/li\u003e\n\u003cli\u003eAutomatic MEN management and remote-start capability\u003c\/li\u003e\n\u003cli\u003e3 x 15A 240V single-phase + 1 x 20A 415V three-phase outlets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 436 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (L x W x H):\u003c\/strong\u003e 130 x 64 x 84 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage and frequency:\u003c\/strong\u003e 415V AC, 50Hz, three phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower factor:\u003c\/strong\u003e 0.8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine type:\u003c\/strong\u003e Water-cooled, 4-cycle diesel, 3 cylinders, 0.854L\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine speed:\u003c\/strong\u003e 3000rpm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStarting:\u003c\/strong\u003e Electric start, 12V 20A charging system\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal harmonic distortion:\u003c\/strong\u003e 3.5% at no load, 2.5% at full load\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel consumption at prime rating:\u003c\/strong\u003e 3.7 L\/h (approx.)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRun time at prime rating:\u003c\/strong\u003e 10.5 hours (approx.)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController:\u003c\/strong\u003e Mecc Alte GC250, manual or auto start, 2-wire remote start\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection:\u003c\/strong\u003e Low oil pressure and high coolant temperature shutdown; over current, over and under voltage, over and under frequency; shunt-trip main circuit breaker\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLift point and mounting:\u003c\/strong\u003e Single centre lift point, four-point base mounting (with or without fork pockets)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eService interval:\u003c\/strong\u003e 250 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSupplied through Genelite and supported Australia-wide by Gen4Sale, an Authorised Genelite Master Dealer.\u003c\/p\u003e","brand":"Genelite","offers":[{"title":"Default Title","offer_id":46168931434687,"sku":"GS012-ETT","price":0.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/7409\/5295\/files\/GS012-ETT-1.jpg?v=1788916851"},{"product_id":"gs013enns","title":"13.5kVA Isuzu Diesel Generator GS013ENNS","description":"\u003cp\u003eThe GS013ENNS is a single phase diesel generator set rated at 13.5kVA prime and 15kVA standby. It is built around an Isuzu 3CE1-BGZG1 diesel engine with a Mecc Alte alternator, and a Comap MRS3 control panel provides shutdown protection.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe set has both prime and standby ratings, so you can size it for regular running or for emergency backup.\u003c\/li\u003e\n\u003cli\u003eThe cooling package is rated for 50°C ambient conditions, so the set suits hot sites.\u003c\/li\u003e\n\u003cli\u003eThe Comap MRS3 control panel includes shutdown protection, so the set stops if a protected fault occurs.\u003c\/li\u003e\n\u003cli\u003eThe heavy-duty Donaldson air cleaner filters the air entering the engine, which helps keep dust out.\u003c\/li\u003e\n\u003cli\u003eThe set-mounted industrial silencer reduces exhaust noise.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat it will run\u003c\/h3\u003e\n\u003cp\u003eAt 13.5kVA prime and 15kVA standby, the GS013ENNS typically suits small workshops, farm sheds, commercial premises and worksites running single phase pumps, compressors, lighting and power tools. At 240V the ratings work out to about 56 amps prime and about 63 amps standby, so add up the running current of your loads and keep the total within the rating you plan to use. Allow headroom for motor starting, because a pump or compressor can draw several times its running current as it starts, and check the compliance plate on each machine. Connection to fixed wiring, including a changeover switch for building backup, must be done by a licensed electrician. Send us your load list and we will help with sizing.\u003c\/p\u003e\n\u003cp\u003eThe GS013ENNS suits small commercial premises, workshops, farms and worksites that need single phase power from a diesel set.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrice on application.\u003c\/strong\u003e Each set is quoted to suit the configuration and options you need and the site it will serve. Use Add to Quote on this page and we will come back to you with a price.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul style=\"list-style-position: outside; padding-left: 1.5em; margin-left: 0;\"\u003e\n\u003cli\u003e13.5kVA prime \/ 15kVA standby, single-phase\u003c\/li\u003e\n\u003cli\u003eIsuzu 3CE1-BGZG1 diesel engine\u003c\/li\u003e\n\u003cli\u003eMecc Alte alternator\u003c\/li\u003e\n\u003cli\u003eComap MRS3 control panel with shutdown protection\u003c\/li\u003e\n\u003cli\u003e50C high-ambient cooling package\u003c\/li\u003e\n\u003cli\u003eHeavy-duty Donaldson air cleaner\u003c\/li\u003e\n\u003cli\u003eSet-mounted industrial silencer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 380 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (L x W x H):\u003c\/strong\u003e 127.5 x 86.5 x 110 cm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSupplied through Genelite and supported Australia-wide by Gen4Sale, an Authorised Genelite Master Dealer.\u003c\/p\u003e","brand":"Genelite","offers":[{"title":"Default Title","offer_id":46168931500223,"sku":"GS013ENNS","price":0.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/7409\/5295\/files\/Untitled-design-31.png?v=1788916852"},{"product_id":"gs013enn","title":"13.5kVA Isuzu Diesel Generator GS013ENN","description":"\u003cp\u003eThe GS013ENN is a three phase diesel generator set rated at 13.5kVA prime and 15kVA standby. It is powered by an Isuzu 3CE1-BGZG1 diesel engine and uses a Mecc Alte alternator, with a Comap MRS3 control panel that includes shutdown protection.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe prime and standby ratings let you size the set for regular running or for emergency backup.\u003c\/li\u003e\n\u003cli\u003eThe high-ambient cooling package is rated for 50°C, which suits hot working conditions.\u003c\/li\u003e\n\u003cli\u003eThe Comap MRS3 control panel includes shutdown protection, which stops the set if a protected fault occurs.\u003c\/li\u003e\n\u003cli\u003eA heavy-duty Donaldson air cleaner filters the intake air, which helps protect the engine on dusty sites.\u003c\/li\u003e\n\u003cli\u003eA set-mounted industrial silencer reduces exhaust noise.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat it will run\u003c\/h3\u003e\n\u003cp\u003eAt 13.5kVA prime and 15kVA standby, the GS013ENN typically suits small workshops, farm sheds, commercial premises and site compounds on three phase: motors, pumps and compressors alongside lighting and power tools. Size the set on the prime rating if it will run regularly, and treat the standby rating as the figure for emergency backup. Spread any single phase loads evenly across the three phases, and allow headroom for motor starting, because a pump or compressor can draw several times its running current as it starts. Check the compliance plate on each machine, and send us your load list for sizing help.\u003c\/p\u003e\n\u003cp\u003eThe GS013ENN suits commercial and industrial premises, workshops, farms and construction sites that need three phase power from a diesel set.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrice on application.\u003c\/strong\u003e The price depends on the configuration and options you choose, so this set is quoted individually. Use Add to Quote on this page and we will come back to you with a price.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul style=\"list-style-position: outside; padding-left: 1.5em; margin-left: 0;\"\u003e\n\u003cli\u003e13.5kVA prime \/ 15kVA standby, three-phase\u003c\/li\u003e\n\u003cli\u003eIsuzu 3CE1-BGZG1 diesel engine\u003c\/li\u003e\n\u003cli\u003eMecc Alte alternator\u003c\/li\u003e\n\u003cli\u003eComap MRS3 control panel with shutdown protection\u003c\/li\u003e\n\u003cli\u003e50C high-ambient cooling package\u003c\/li\u003e\n\u003cli\u003eHeavy-duty Donaldson air cleaner\u003c\/li\u003e\n\u003cli\u003eSet-mounted industrial silencer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 380 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (L x W x H):\u003c\/strong\u003e 127.5 x 86.5 x 110 cm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSupplied through Genelite and supported Australia-wide by Gen4Sale, an Authorised Genelite Master Dealer.\u003c\/p\u003e","brand":"Genelite","offers":[{"title":"Default Title","offer_id":46168931532991,"sku":"GS013ENN","price":0.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/7409\/5295\/files\/Untitled-design-31_f53fd7c9-cab0-45b8-9721-ecab58d7765a.png?v=1788916852"},{"product_id":"15kva-11kw-gkd15s-defence","title":"15kVA (12kW) Genelite Defence Diesel Generator GKD15S","description":"\u003cp\u003eThe GKD15S is a Genelite Defence diesel generator rated at 15kVA (12kW) and powered by a Kubota diesel engine. It is custom-built for military and defence applications.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eQuieter cooling fans, secondary mufflers and noise-absorbing ducts are fitted to reduce the noise the set produces.\u003c\/li\u003e\n\u003cli\u003eA low noise signature suits applications where the set needs to be less conspicuous.\u003c\/li\u003e\n\u003cli\u003eBuilt-in diagnostics and prognostics help identify faults and developing problems, which supports maintenance planning.\u003c\/li\u003e\n\u003cli\u003eThe set is designed for simple maintenance, so routine servicing is straightforward.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat it will run\u003c\/h3\u003e\n\u003cp\u003eAt 15kVA (12kW), the GKD15S typically suits lighting, workshop tools and general power for a small compound. Add up the running loads, then check the starting current of your largest motor, found on its compliance plate, against the set's rating. Send us your load list, including the voltage and phase your equipment needs, and we will help with sizing.\u003c\/p\u003e\n\u003cp\u003eThe GKD15S suits military and defence field power, remote and temporary sites, and commercial projects that call for a diesel set built with noise reduction in mind.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrice on application.\u003c\/strong\u003e Defence sets are quoted to suit the configuration and the project requirements. Use Add to Quote on this page and we will come back to you with a price.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul style=\"list-style-position: outside; padding-left: 1.5em; margin-left: 0;\"\u003e\n\u003cli\u003eCustom-built for military\/defence applications\u003c\/li\u003e\n\u003cli\u003ePowered by a Kubota diesel engine\u003c\/li\u003e\n\u003cli\u003eQuieter cooling fans, secondary mufflers, noise-absorbing ducts\u003c\/li\u003e\n\u003cli\u003eExcellent power quality and high reliability\u003c\/li\u003e\n\u003cli\u003eDesigned for battlefield mobility with a low noise signature\u003c\/li\u003e\n\u003cli\u003eBuilt-in diagnostics\/prognostics\u003c\/li\u003e\n\u003cli\u003eSimple maintenance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSupplied through Genelite and supported Australia-wide by Gen4Sale, an Authorised Genelite Master Dealer.\u003c\/p\u003e","brand":"Genelite","offers":[{"title":"Default Title","offer_id":46168931762367,"sku":"GKD15S","price":0.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/7409\/5295\/files\/GKD-defence-1200x1200-1_52e93f7f-c98c-4e20-b9ea-d42cea0a89cd.png?v=1788916855"},{"product_id":"gr12sng","title":"15kVA Genelite Natural Gas Generator GR12S-NG","description":"\u003cp\u003eThe GR12S-NG is a 15 kVA \/ 12 kW three-phase generator set that runs on natural gas. A Kubota gas engine (WG1605-N-CHN-1) drives an AC synchronous alternator, and the 12 kW rating applies at 50 Hz across 380, 400, 415 and 440 V. A DeepSea 7310 controller runs the set.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe engine ECU controls ignition, speed and air\/fuel ratio electronically.\u003c\/li\u003e\n\u003cli\u003eAuto start and auto mains failure (AMF) functions let the set start itself when mains power is lost.\u003c\/li\u003e\n\u003cli\u003eVoltage and power factor control and engine monitoring are built into the control system, which also supports remote monitoring over RS232, RS485 and Ethernet.\u003c\/li\u003e\n\u003cli\u003eAn integrated electrical control cabinet rated IP54 keeps the controls on the set itself.\u003c\/li\u003e\n\u003cli\u003eThe cooling system is rated for ambient temperatures up to 50°C.\u003c\/li\u003e\n\u003cli\u003eA high-quality powder-coat finish protects the structure, which can be installed outdoors.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFuel is natural gas with a methane number above 80, supplied at 10 to 20 kPa (gauge pressure). Consumption at 100% load is 4.2 m³\/h, based on gas with a lower calorific value of 36.0 MJ\/Nm³ and with a tolerance of +5% at rated output. Noise is 75.1 dB(A) at 1 m, 62.2 dB(A) at 7 m and 60.4 dB(A) at 10 m.\u003c\/p\u003e\n\u003ch3\u003eWhat it will run\u003c\/h3\u003e\n\u003cp\u003eAt 15 kVA \/ 12 kW, the GR12S-NG typically suits the essential circuits of a small commercial site: lighting, controls, IT and communications, refrigeration and a few motors. Motors and compressors draw several times their running current as they start, so size the set around the largest motor you need to start. Check the rating plates of the equipment you plan to run, and have a licensed electrician or engineer assess the site loads and connect the set to site wiring through a suitable changeover arrangement. Send us your load list and we will help with sizing.\u003c\/p\u003e\n\u003cp\u003eThe GR12S-NG suits workshops, small commercial buildings and light industrial premises that have a natural gas supply and want backup power that starts automatically when the mains fail.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrice on application.\u003c\/strong\u003e Each GR12S-NG is quoted to your configuration and site. Use Add to Quote on this page and we will come back to you with a price.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul style=\"list-style-position: outside; padding-left: 1.5em; margin-left: 0;\"\u003e\n\u003cli\u003e15kVA \/ 12kW output on natural gas\u003c\/li\u003e\n\u003cli\u003eKubota Gas WG1605-N-CHN-1 engine\u003c\/li\u003e\n\u003cli\u003eAC synchronous alternator\u003c\/li\u003e\n\u003cli\u003eMeasured noise 62.2 dB(A) at 7m; industrial silencer cuts noise 12-20 dB(A)\u003c\/li\u003e\n\u003cli\u003eType B gas train\u003c\/li\u003e\n\u003cli\u003eCooling system rated to 50°C ambient\u003c\/li\u003e\n\u003cli\u003eAdvanced engine ECU control (ignition, speed, air\/fuel ratio)\u003c\/li\u003e\n\u003cli\u003e2 x 32A three-phase IP56 RCD outlets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 708 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (L x W x H):\u003c\/strong\u003e 179 x 92 x 112.6 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated voltages (50 Hz):\u003c\/strong\u003e 380 V, 400 V, 415 V and 440 V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEfficiency:\u003c\/strong\u003e 28.6%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMethane number:\u003c\/strong\u003e MN \u0026gt;80\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel consumption at 100% load:\u003c\/strong\u003e 4.2 m³\/h\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupply gas pressure (gauge):\u003c\/strong\u003e 10 to 20 kPa\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise level at 1 m:\u003c\/strong\u003e 75.1 dB(A)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise level at 10 m:\u003c\/strong\u003e 60.4 dB(A)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController:\u003c\/strong\u003e DeepSea 7310 with RS232, RS485 and Ethernet interfaces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl functions:\u003c\/strong\u003e Auto start and auto mains failure (AMF), voltage and power factor control, engine monitoring, remote monitoring\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl cabinet:\u003c\/strong\u003e Integrated, IP54\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStructure type:\u003c\/strong\u003e Soundproof\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards and certificates:\u003c\/strong\u003e ISO3046, ISO8528, GB2820, BS5000 PT99, AS1359, IEC34, ISO9001:2008\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSupplied through Genelite and supported Australia-wide by Gen4Sale, an Authorised Genelite Master Dealer.\u003c\/p\u003e","brand":"Genelite","offers":[{"title":"Default Title","offer_id":46168931795135,"sku":"GR12SNG","price":0.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/7409\/5295\/files\/A94cwoq2_6492kd_280.png?v=1788916855"},{"product_id":"15-6kva-15kw-15rmp-1050a-cummins-rmp","title":"15.6kVA (15kW) Cummins RMP Diesel Generator 15RMP-1050A","description":"\u003cp\u003eThe 15RMP-1050A is a Cummins RMP diesel generator set rated at 15.6kVA (15kW). It is designed to the MIL-DTL-32496 military specification, runs on multiple fuels and starts on a 24 volt system with a NATO slave connection.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMulti-fuel capability covers JP-8, JP-4, DF-1, DF-2 and DF-A, which gives flexibility where the fuel supply varies.\u003c\/li\u003e\n\u003cli\u003eAutomatic synchronisation with two-button paralleling lets the set share a load with other compatible sets.\u003c\/li\u003e\n\u003cli\u003eThe Advanced Digital Control System (ADCS) provides built-in diagnostics and prognostics, which help identify faults and developing problems.\u003c\/li\u003e\n\u003cli\u003eNetworked automatic start and stop capability allows the set to be started and stopped under network control instead of by hand.\u003c\/li\u003e\n\u003cli\u003eHigh-altitude electromagnetic pulse survivability is part of the design, which addresses the risk of a pulse event disabling unprotected electronics.\u003c\/li\u003e\n\u003cli\u003eA low infrared and noise signature suits operations where the set needs to be less conspicuous in the field.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat it will run\u003c\/h3\u003e\n\u003cp\u003eAt 15.6kVA (15kW), the 15RMP-1050A typically supports a command or communications post, field workshop equipment and general power for a small camp. Motors draw several times their running current as they start, so find the starting figure on each compliance plate and check it against the set's rating. Send us your load list, including the voltage and phase your equipment needs and whether you plan to run sets in parallel, and we will help with sizing.\u003c\/p\u003e\n\u003cp\u003eThe 15RMP-1050A suits defence and government field power, command and communications posts, and commercial or remote sites that specify a military-specification set.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrice on application.\u003c\/strong\u003e Each set is quoted to suit the configuration, options and project it will serve. Use Add to Quote on this page and we will come back to you with a price.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul style=\"list-style-position: outside; padding-left: 1.5em; margin-left: 0;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards:\u003c\/strong\u003e Designed to MIL-DTL-32496; electromagnetic compatibility to MIL-STD-461F; radio frequency emissions MIL-STD-2169; NATO STANAG 4135\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput (prime):\u003c\/strong\u003e 15.6kVA @ 50Hz; 15kW @ 60Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRating basis:\u003c\/strong\u003e Prime: maximum power at a variable load for an unlimited number of hours; 10% overload available for a limited time\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower factor:\u003c\/strong\u003e Operates between 0.8 lagging and 1.0\u003c\/li\u003e\n\u003cli\u003eMulti-fuel capable (JP-8, JP-4, DF-1, DF-2, DF-A)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel consumption:\u003c\/strong\u003e 4.01 L\/h at 100% load\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel tank:\u003c\/strong\u003e 8 hours fuel tank with auxiliary fuel connections\u003c\/li\u003e\n\u003cli\u003e24 volt starting with NATO slave connection\u003c\/li\u003e\n\u003cli\u003eLow infrared and noise signature for battlefield use\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise level:\u003c\/strong\u003e 70 dB(A) @ 7m at full load\u003c\/li\u003e\n\u003cli\u003eHigh-altitude electromagnetic pulse survivability\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOther features:\u003c\/strong\u003e Low Velocity Air Drop (LVAD) capable; battle short mode; nuclear, biological and chemical contamination survivability\u003c\/li\u003e\n\u003cli\u003eAutomatic synchronisation with two-button paralleling\u003c\/li\u003e\n\u003cli\u003eBuilt-in diagnostics\/prognostics with Advanced Digital Control System (ADCS)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController:\u003c\/strong\u003e RMP Advanced Digital Control System (AdvDCS) with Masterless Load Demand (MLD)\u003c\/li\u003e\n\u003cli\u003eNetworked automatic start\/stop capability\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine configuration:\u003c\/strong\u003e 4-cycle, in-line, 84 mm bore x 90 mm stroke, 1.995 L, direct injection, Tier 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlternator:\u003c\/strong\u003e Brushless, 4 pole synchronous, 2\/3 pitch stator, Permanent Magnet Generator (PMG) exciter, Class F and H insulation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery charging alternator:\u003c\/strong\u003e 45 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency regulation:\u003c\/strong\u003e ±0.5% at 50Hz; ±3% at 60Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage regulation:\u003c\/strong\u003e ±3% of rated voltage, no load to full load\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWaveform distortion (THDV):\u003c\/strong\u003e Less than 5% no load to full linear load; less than 3% for any single harmonic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating temperature:\u003c\/strong\u003e -45°C to 57°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 703 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (L x W x H):\u003c\/strong\u003e 165.8 x 91.8 x 135.2 cm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSupplied through Genelite and supported Australia-wide by Gen4Sale, an Authorised Genelite Master Dealer.\u003c\/p\u003e","brand":"Genelite","offers":[{"title":"Default Title","offer_id":46168931860671,"sku":"15RMP-1050A","price":0.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/7409\/5295\/files\/AMMPS-5kw-Power-Unit-2-1200x1200-1_2ffadd5e-8642-49e5-ab0d-6be4b0c4d458.png?v=1788916857"},{"product_id":"ghp18000e-lrt-3","title":"18kVA Genelite Petrol Generator GHP18000E-LRT-3","description":"\u003cp\u003eThe GHP18000E-LRT\/3 is a three phase petrol generator producing 14.4kW (18kVA) at 415V and 50Hz. A 740cc Hyundai H740E engine running at 3000 rpm drives a brushless AC synchronous alternator, and starting is electric.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eA 32A 415V outlet supplies three phase equipment, and two 15A 240V outlets, switched with thermal overload, look after single phase tools.\u003c\/li\u003e\n\u003cli\u003eThe 25 litre fuel tank gives 7 hours at 60% load, so allow for a refuel partway through a long day.\u003c\/li\u003e\n\u003cli\u003eElectric start gets the Hyundai engine running without a pull cord.\u003c\/li\u003e\n\u003cli\u003eHarmonic distortion of less than 5% suits sensitive electronics, and the alternator has Class H insulation.\u003c\/li\u003e\n\u003cli\u003eA heavy-duty roll frame surrounds the engine and alternator to guard against knocks.\u003c\/li\u003e\n\u003cli\u003eThe engine has a 3 year limited warranty, provided it is serviced at the intervals in the user manual.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNoise is 78 dB(A) at 7 m. Fuel use is about 3.6 litres an hour at 60% load (25 litres over 7 hours).\u003c\/p\u003e\n\u003ch3\u003eWhat it will run\u003c\/h3\u003e\n\u003cp\u003eFor three phase work, 18kVA at 415V is about 25A per phase (18kVA divided by 415V and 1.73). The GHP18000E-LRT\/3 typically runs three phase pumps, compressors and machinery in a workshop or on site, along with lighting and hand tools, provided the total stays within 14.4kW. The 240V outlets each draw on one phase, so keep single phase loads balanced across the three. Motors pull a starting surge well above their running current, so check the largest motor against the generator with the rest of the load running, and read each compliance plate. An inlet and changeover switch installed by a licensed electrician is the way to connect to a switchboard. Send us your load list and we will help you check the sizing.\u003c\/p\u003e\n\u003cp\u003eThe GHP18000E-LRT\/3 suits fabrication and engineering shops, pumping and irrigation, construction sites and farms with three phase equipment.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 145 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (L x W x H):\u003c\/strong\u003e 85 x 57 x 60 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput:\u003c\/strong\u003e 14.4kW \/ 18kVA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhase and voltage:\u003c\/strong\u003e Three phase, 415V, 50Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine:\u003c\/strong\u003e Hyundai H740E, 740cc, 3000 rpm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStarting:\u003c\/strong\u003e Electric start\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel tank capacity:\u003c\/strong\u003e 25 L\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRun time:\u003c\/strong\u003e 7 hours at 60% load\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise level:\u003c\/strong\u003e 78 dB(A) at 7 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlets:\u003c\/strong\u003e 1 x 32A 415V, 2 x 15A 240V switched with thermal overload\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrame:\u003c\/strong\u003e Extra large roll frame\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlternator:\u003c\/strong\u003e AC synchronous, brushless, Class H insulation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHarmonic distortion:\u003c\/strong\u003e Less than 5%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 3 year limited engine warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSupplied through Genelite and supported Australia-wide by Gen4Sale, an Authorised Genelite Master Dealer.\u003c\/p\u003e","brand":"Genelite","offers":[{"title":"Default Title","offer_id":46168932188351,"sku":"GHP18000E-LRT-3","price":7789.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/7409\/5295\/files\/095348-resize.png?v=1788916860"},{"product_id":"ghp18000e-lrt","title":"18kVA Genelite Petrol Generator GHP18000E-LRT","description":"\u003cp\u003eThe GHP18000E-LRT pairs a Hyundai H740E petrol engine with a single phase alternator producing 14.4kW (18kVA) at 240V and 50Hz. The 740cc engine runs at 3000 rpm with electric start, and the alternator is a brushless AC synchronous type with Class H insulation.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eA 25 litre fuel tank gives 7 hours at 60% load, so plan a refuel partway through a long day.\u003c\/li\u003e\n\u003cli\u003eA 32A outlet rated IP66, with RCD and circuit breaker protection, sits alongside two 15A 240V outlets that are switched with thermal overload.\u003c\/li\u003e\n\u003cli\u003eElectric start gets the engine going without a pull cord.\u003c\/li\u003e\n\u003cli\u003eHarmonic distortion of less than 5% suits sensitive electronics such as laptops and test equipment.\u003c\/li\u003e\n\u003cli\u003eA heavy-duty roll frame guards the engine and alternator against knocks.\u003c\/li\u003e\n\u003cli\u003eA 3 year limited engine warranty applies, with servicing at the intervals set out in the user manual.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFuel use works out at about 3.6 litres an hour at 60% load, from 25 litres over 7 hours. Noise is 78 dB(A) at 7 m.\u003c\/p\u003e\n\u003ch3\u003eWhat it will run\u003c\/h3\u003e\n\u003cp\u003eWith 14.4kW on offer, the GHP18000E-LRT supplies about 60A at 240V when fully loaded (watts divided by 240). It typically runs lighting, power tools, pumps, compressors and the equipment in a site shed or workshop, so long as the combined load stays under 14.4kW. A motor pulls a larger surge as it starts, which means the biggest motor should be sized against the generator with the other loads already running. Read each appliance's compliance plate for its rated watts or amps before you add it up. A licensed electrician must fit the inlet and changeover switch for any link into a building's wiring. Send us your load list and we will check the sizing with you.\u003c\/p\u003e\n\u003cp\u003eThe GHP18000E-LRT suits trades and contractors, workshops, farms and small businesses, including backup power for commercial premises.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 145 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (L x W x H):\u003c\/strong\u003e 85 x 57 x 60 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput:\u003c\/strong\u003e 14.4kW \/ 18kVA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhase and voltage:\u003c\/strong\u003e Single phase, 240V, 50Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine:\u003c\/strong\u003e Hyundai H740E, 740cc, 3000 rpm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStarting:\u003c\/strong\u003e Electric start\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel tank capacity:\u003c\/strong\u003e 25 L\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRun time:\u003c\/strong\u003e 7 hours at 60% load\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise level:\u003c\/strong\u003e 78 dB(A) at 7 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlets:\u003c\/strong\u003e 1 x 32A IP66 with RCD and circuit breaker, 2 x 15A 240V switched with thermal overload\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrame:\u003c\/strong\u003e Extra large roll frame\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlternator:\u003c\/strong\u003e AC synchronous, brushless, Class H insulation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHarmonic distortion:\u003c\/strong\u003e Less than 5%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 3 year limited engine warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSupplied through Genelite and supported Australia-wide by Gen4Sale, an Authorised Genelite Master Dealer.\u003c\/p\u003e","brand":"Genelite","offers":[{"title":"Default Title","offer_id":46168932221119,"sku":"GHP18000E-LRT","price":7049.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/7409\/5295\/files\/095348-resize_17dc0320-8413-4095-a712-7ced7016b1e3.png?v=1788916860"},{"product_id":"ghp18000e-lrt-h","title":"18kVA Genelite Petrol Generator GHP18000E-LRT-H","description":"\u003cp\u003eThe GHP18000E-LRT-H is a single phase petrol generator producing 14.4kW (18kVA) at 240V and 50Hz, with a Hyundai H740E engine and a 25 litre fuel tank. The 32A outlet and both 15A outlets are IP66 rated, each with RCD and circuit breaker protection.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAll three outlets are IP66 rated against dust and powerful water jets, and each is backed by RCD and circuit breaker protection, so a fault on one circuit is dealt with at the generator.\u003c\/li\u003e\n\u003cli\u003eA 25 litre tank runs the set for 7 hours at 60% load before it needs refuelling.\u003c\/li\u003e\n\u003cli\u003eThe 740cc Hyundai H740E runs at 3000 rpm and is started electrically rather than by pull cord.\u003c\/li\u003e\n\u003cli\u003eA brushless AC synchronous alternator with Class H insulation keeps harmonic distortion under 5%, which suits sensitive electronics.\u003c\/li\u003e\n\u003cli\u003eThe extra large roll frame wraps the engine and alternator to guard against knocks.\u003c\/li\u003e\n\u003cli\u003eA 3 year limited engine warranty comes with the set, and it depends on servicing at the intervals in the user manual.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNoise is 78 dB(A) at 7 m. Fuel use is about 3.6 litres an hour at 60% load, worked out from 25 litres over 7 hours.\u003c\/p\u003e\n\u003ch3\u003eWhat it will run\u003c\/h3\u003e\n\u003cp\u003eFull output of 14.4kW at 240V is about 60A (watts divided by 240), so add up the running load before plugging in. Typical loads include power tools, lighting, pumps, compressors and the equipment in a site office, provided the combined total stays under 14.4kW. Motors draw a surge as they start that is well above their running current, so leave headroom for the largest one and read each appliance's compliance plate for its watts or amps. Any connection to a building's wiring needs an inlet and changeover switch fitted by a licensed electrician. Send us your load list and we will check the sizing with you.\u003c\/p\u003e\n\u003cp\u003eThe GHP18000E-LRT-H suits rental fleets, building sites, outdoor events and farms where several people use the outlets at once.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 145 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (L x W x H):\u003c\/strong\u003e 85 x 57 x 60 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput:\u003c\/strong\u003e 14.4kW \/ 18kVA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhase and voltage:\u003c\/strong\u003e Single phase, 240V, 50Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine:\u003c\/strong\u003e Hyundai H740E, 740cc, 3000 rpm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStarting:\u003c\/strong\u003e Electric start\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel tank capacity:\u003c\/strong\u003e 25 L\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRun time:\u003c\/strong\u003e 7 hours at 60% load\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise level:\u003c\/strong\u003e 78 dB(A) at 7 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlets:\u003c\/strong\u003e 1 x 32A IP66 with RCD and circuit breaker, 2 x 15A IP66 with RCD and circuit breaker\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrame:\u003c\/strong\u003e Extra large roll frame\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlternator:\u003c\/strong\u003e AC synchronous, brushless, Class H insulation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHarmonic distortion:\u003c\/strong\u003e Less than 5%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 3 year limited engine warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSupplied through Genelite and supported Australia-wide by Gen4Sale, an Authorised Genelite Master Dealer.\u003c\/p\u003e","brand":"Genelite","offers":[{"title":"Default Title","offer_id":46168932253887,"sku":"GHP18000E-LRT-H","price":7898.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/7409\/5295\/files\/095348-resize_866c4e57-231c-4cd2-b963-ae84eda300ee.png?v=1788916861"},{"product_id":"ghp18000e-fbt-3","title":"18kVA Genelite Petrol Generator GHP18000E-FBT-3","description":"\u003cp\u003eThree phase 415V power at 50Hz comes from the GHP18000E-FBT\/3, a petrol generator producing 14.4kW (18kVA). Its 740cc Hyundai H740E engine runs at 3000 rpm with electric start and is coupled to a brushless AC synchronous alternator.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eA 32A 415V outlet supplies three phase equipment, and two 15A 240V outlets cover single phase tools.\u003c\/li\u003e\n\u003cli\u003eThe 50 litre fuel tank gives 14 hours at 60% load, so a full day's work fits on one tank.\u003c\/li\u003e\n\u003cli\u003eElectric start removes the need to pull a cord to get the Hyundai engine going.\u003c\/li\u003e\n\u003cli\u003eHarmonic distortion under 5% suits sensitive electronics running alongside motors, and the alternator has Class H insulation.\u003c\/li\u003e\n\u003cli\u003eA heavy-duty roll frame protects the engine and alternator from knocks.\u003c\/li\u003e\n\u003cli\u003eA 3 year limited engine warranty applies, subject to servicing at the intervals in the user manual.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNoise is 78 dB(A) at 7 m. Fuel use is about 3.6 litres an hour at 60% load, worked out from 50 litres over 14 hours.\u003c\/p\u003e\n\u003ch3\u003eWhat it will run\u003c\/h3\u003e\n\u003cp\u003eAt 415V three phase, 18kVA works out at about 25A per phase (18kVA divided by 415V and 1.73). The GHP18000E-FBT\/3 typically runs three phase pumps, compressors and workshop machinery alongside site lighting and tools, as long as the total stays within 14.4kW. Each 240V outlet draws on a single phase, so spread single phase loads across the three phases. Motors draw a starting surge well above their running current, so allow for the biggest motor starting and check each item's compliance plate. Any connection to a switchboard needs an inlet and changeover switch installed by a licensed electrician. Send us your load list and we will help you work out the sizing.\u003c\/p\u003e\n\u003cp\u003eThe GHP18000E-FBT\/3 suits construction and industrial sites, workshops and farms that run three phase equipment, as well as backup power for commercial premises.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 155 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (L x W x H):\u003c\/strong\u003e 105 x 55 x 70 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput:\u003c\/strong\u003e 14.4kW \/ 18kVA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhase and voltage:\u003c\/strong\u003e Three phase, 415V, 50Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine:\u003c\/strong\u003e Hyundai H740E, 740cc, 3000 rpm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStarting:\u003c\/strong\u003e Electric start\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel tank capacity:\u003c\/strong\u003e 50 L\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRun time:\u003c\/strong\u003e 14 hours at 60% load\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise level:\u003c\/strong\u003e 78 dB(A) at 7 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlets:\u003c\/strong\u003e 1 x 32A 415V, 2 x 15A 240V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrame:\u003c\/strong\u003e Extra large roll frame\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlternator:\u003c\/strong\u003e AC synchronous, brushless, Class H insulation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHarmonic distortion:\u003c\/strong\u003e Less than 5%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 3 year limited engine warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSupplied through Genelite and supported Australia-wide by Gen4Sale, an Authorised Genelite Master Dealer.\u003c\/p\u003e","brand":"Genelite","offers":[{"title":"Default Title","offer_id":46168932319423,"sku":"GHP18000E-FBT-3","price":8889.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/7409\/5295\/files\/095716_resize.png?v=1788916861"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/7409\/5295\/collections\/PE-Generator-SQ3200B-Au-B-02-png-1200x1200-1_400x400_6a456176-e224-4833-917b-946d03971705.webp?v=1789278094","url":"https:\/\/gen4sale.com.au\/collections\/genelite.oembed?page=7","provider":"Gen4Sale","version":"1.0","type":"link"}