{"title":"ABLE Diesel Generators","description":"\u003cp\u003eABLE Power supplies silenced diesel generators from warehouses in Brisbane, Melbourne and Perth. The range at Gen4Sale runs from the 6kVA Yanmar-powered FP6LY to the 200kVA LG200D3, in single and three phase.\u003c\/p\u003e\n\u003cp\u003eEvery unit is water cooled, with electric start, an RCD to Australian Standards and two-wire remote start, so it can be paired with an automatic transfer switch for backup that starts on its own. The smaller sets suit home backup, farms and small business, and the larger three phase sets are built for commercial and industrial standby.\u003c\/p\u003e\n\u003cp\u003ePick up free from ABLE's warehouses in Park Ridge (Brisbane), Thomastown (Melbourne) or Bentley (Perth). Delivery anywhere else is priced at checkout. \u003ca href=\"\/pages\/customer-support\"\u003eAsk us\u003c\/a\u003e if you want help choosing a size.\u003c\/p\u003e","products":[{"product_id":"8kva-able-diesel-generator-pl8d1","title":"8kVA ABLE Diesel Generator PL8D1","description":"\u003cp\u003eThe PL8D1 is an 8kVA single phase diesel generator rated 8kVA (8kW) prime and 8.8kVA (8.8kW) standby at 240V, 50Hz and a power factor of 1.0. It is powered by a three cylinder, water-cooled diesel running at 1500 rpm, which drives a four-pole brushless synchronous alternator with AVR. The 12 volt electric start comes with its battery, and protection is an IP67-enclosed RCD plus over current protection.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWith a power factor of 1.0, the 8kVA prime rating is also 8kW, so the full rating is available as real power.\u003c\/li\u003e\n\u003cli\u003eA four-pole alternator turning at 1500 rpm produces the 50Hz supply, and the brushless design means there are no brushes to wear.\u003c\/li\u003e\n\u003cli\u003eThe AVR keeps the output voltage steady while appliances cycle on and off.\u003c\/li\u003e\n\u003cli\u003eThe ComAp AMF5 controller has a two-wire remote start input, so an external switch or controller can start the set.\u003c\/li\u003e\n\u003cli\u003eThree 15A outlets and one 32A outlet, all 240V, are rated IP66 (dust tight and protected against powerful water jets), and hardwire terminals are fitted for a fixed connection.\u003c\/li\u003e\n\u003cli\u003eThe canopy is lockable, which restricts access to the set, and it is sound deadened with a weather-resistant powder coat.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe tank is a 70 litre single skin tank (not bunded). At prime load the set uses about 2.3 litres of diesel an hour, which gives about 30 hours of running on a full tank. Noise is 65 dB(A) at 7 m.\u003c\/p\u003e\n\u003ch3\u003eWhat it will run\u003c\/h3\u003e\n\u003cp\u003eAt 8kW prime the PL8D1 supplies about 33A at 240V. Typically that suits lighting, fridges and freezers, a pressure pump, power tools and an air conditioner, as long as the combined running load stays within the rating. Motors in pumps, compressors and air conditioners draw several times their running current when they start, so allow headroom for the largest one. Check each appliance's compliance plate for its running and starting power, then add the figures up. For backing up a home, the connection goes through an inlet and changeover switch installed by a licensed electrician. Send us your load list and we can help with the sizing.\u003c\/p\u003e\n\u003cp\u003eThe PL8D1 suits homes, farmhouses and farm buildings, small workshops and cafes, as home backup or standby power during a mains outage. With both prime and standby ratings it can also run for regular periods.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul style=\"list-style-position: outside; padding-left: 1.5em; margin-left: 0;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput:\u003c\/strong\u003e 8kVA (8kW) prime, 8.8kVA (8.8kW) standby @ 1.0PF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated current:\u003c\/strong\u003e 33 Amps (prime)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine:\u003c\/strong\u003e Three-cylinder diesel, 1500rpm, water cooled\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlternator:\u003c\/strong\u003e Single phase 4-pole brushless synchronous alternator with AVR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController:\u003c\/strong\u003e ComAp AMF5, two-wire remote start\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStart type:\u003c\/strong\u003e 12 volt electric, battery included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhase \/ voltage:\u003c\/strong\u003e Single phase, 240V, 50Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel:\u003c\/strong\u003e Diesel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel tank:\u003c\/strong\u003e 70 L single skin (not bunded)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel use:\u003c\/strong\u003e 2.3 L\/hr at prime load\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRun time:\u003c\/strong\u003e 30 hrs continuous at prime load\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise level:\u003c\/strong\u003e 65 dB(A) @ 7m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlets:\u003c\/strong\u003e 3 x 15 Amp and 1 x 32 Amp 240V IP66 outlets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardwire terminals:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection:\u003c\/strong\u003e RCD to Australian Standards (IP67 enclosed), over current protection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCanopy:\u003c\/strong\u003e Lockable, sound deadened, weather-resistant powder coat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (L x W x H):\u003c\/strong\u003e 139 x 73 x 108 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 590 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 12 months or 1,000 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePart of the ABLE Power range at Gen4Sale.\u003c\/p\u003e","brand":"ABLE","offers":[{"title":"Default Title","offer_id":67546720698559,"sku":"PL8D1","price":5879.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/7409\/5295\/files\/ABLE-PL8D1.jpg?v=1791155213"},{"product_id":"6kva-able-yanmar-low-profile-diesel-generator-fp6ly","title":"6kVA ABLE Yanmar Low Profile Diesel Generator FP6LY","description":"\u003cp\u003eThe FP6LY is a 6kVA single phase low profile diesel generator rated 5.5kVA (5.5kW) prime and 6kVA (6kW) standby at 240V, 50Hz and a power factor of 1.0. It is powered by a Yanmar 2TNV70-HGE, a two cylinder, water-cooled diesel running at 3000 rpm, and drives a two-pole brushless synchronous alternator with AVR. Starting is electric at 12 volts with the battery included, and protection is an IP67-enclosed RCD.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe low profile build keeps the height of the set down, which helps where headroom is limited.\u003c\/li\u003e\n\u003cli\u003eThe engine runs at 3000 rpm and drives a two-pole alternator, the pairing that produces a 50Hz supply.\u003c\/li\u003e\n\u003cli\u003eThe alternator is brushless, so there are no brushes to wear, and its AVR holds the output voltage steady as the load changes.\u003c\/li\u003e\n\u003cli\u003eA two-wire remote start input on the ComAp AMF5 controller lets an external switch or controller start the set.\u003c\/li\u003e\n\u003cli\u003eOne 32A outlet and two 15A outlets are rated IP66 (dust tight and protected against powerful water jets).\u003c\/li\u003e\n\u003cli\u003eThe canopy is sound deadened throughout and finished in a weather-resistant powder coat with stainless steel fittings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAt 2.4 litres an hour at prime load, the 28 litre tank lasts about 12 hours. Noise is 68 dB(A) at 7 m.\u003c\/p\u003e\n\u003ch3\u003eWhat it will run\u003c\/h3\u003e\n\u003cp\u003eAt 5.5kW prime the FP6LY supplies about 23A at 240V, and at a power factor of 1.0 the kVA and kW figures are the same. Typically that suits lighting, fridges and freezers, a pressure pump, power tools and a small air conditioner, so long as the loads running together stay within the rating. A motor in a pump, compressor or air conditioner can draw several times its running current as it starts, so allow headroom for the largest one. The compliance plate on each appliance gives its running and starting power. To use it as home backup, have a licensed electrician install an inlet and changeover switch. Send us your load list and we will size it with you.\u003c\/p\u003e\n\u003cp\u003eThe FP6LY suits home backup, farm pumps and buildings, and work sites that need power for tools and lighting. With both a prime and a standby rating, it can cover a mains outage or run for regular periods.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul style=\"list-style-position: outside; padding-left: 1.5em; margin-left: 0;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput:\u003c\/strong\u003e 5.5kVA (5.5kW) prime, 6kVA (6kW) standby @ 1.0PF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated current:\u003c\/strong\u003e 23 Amps (prime)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine:\u003c\/strong\u003e Yanmar 2TNV70-HGE two-cylinder diesel, 3000rpm, water cooled\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlternator:\u003c\/strong\u003e Single phase 2-pole brushless synchronous alternator with AVR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController:\u003c\/strong\u003e ComAp AMF5, two-wire remote start\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStart type:\u003c\/strong\u003e 12 volt electric, battery included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhase \/ voltage:\u003c\/strong\u003e Single phase, 240V, 50Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel:\u003c\/strong\u003e Diesel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel tank:\u003c\/strong\u003e 28 L\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel use:\u003c\/strong\u003e 2.4 L\/hr at prime load\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRun time:\u003c\/strong\u003e 12 hrs continuous at prime load\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise level:\u003c\/strong\u003e 68 dB(A) @ 7m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlets:\u003c\/strong\u003e 1 x 32 Amp and 2 x 15 Amp IP66 outlets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardwire terminals:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection:\u003c\/strong\u003e RCD to Australian Standards (IP67 enclosed)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCanopy:\u003c\/strong\u003e Sound deadened throughout, weather-resistant powder coat, stainless steel fittings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMine spec:\u003c\/strong\u003e Mine spec upgrade available\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (L x W x H):\u003c\/strong\u003e 107 x 62 x 70 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 298 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 2 years or 2,000 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePart of the ABLE Power range at Gen4Sale.\u003c\/p\u003e","brand":"ABLE","offers":[{"title":"Default Title","offer_id":67546745405631,"sku":"FP6LY","price":8878.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/7409\/5295\/files\/ABLE-FP6LY-2.jpg?v=1791155214"},{"product_id":"10kva-able-diesel-generator-pl9d1","title":"10kVA ABLE Diesel Generator PL9D1","description":"\u003cp\u003eThe PL9D1 is a 10kVA single phase diesel generator rated 9kVA (9kW) prime (PRP) and 10kVA (10kW) standby (ESP) at 240V, 50Hz and a power factor of 1.0. It is powered by a YangDong YD385D, a three cylinder, water-cooled diesel running at 1500 rpm, driving a four-pole brushless alternator with AVR. Starting is electric at 12 volts with the battery included, and protection is an IP67-enclosed RCD plus over current protection.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe YD385D is naturally aspirated with direct injection and a mechanical governor, so there is no turbocharger to maintain and engine speed is held at 1500 rpm.\u003c\/li\u003e\n\u003cli\u003eThe alternator has 100% copper windings, class H insulation and voltage regulation of ±0.5%, which keeps the output voltage steady as the load changes.\u003c\/li\u003e\n\u003cli\u003eThe ComAp AMF controller has a two-wire remote start input, so an external switch or controller can start the set.\u003c\/li\u003e\n\u003cli\u003eThe canopy locks, is sound deadened to cut engine noise, and has a weather-resistant powder coat with stainless steel fittings.\u003c\/li\u003e\n\u003cli\u003eMine site ready bunding is part of the specification, for sites that need fuel spills contained.\u003c\/li\u003e\n\u003cli\u003eOperating conditions are specified from -25°C to 45°C ambient (a coolant heater is needed below 5°C), with humidity below 80% and altitude below 1000 m, so you can check them against your site.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe tank holds 70 litres. Outlets are 3 x 15A and 1 x 32A, with hardwire terminals for a fixed connection. Noise is about 65 dB(A) at 7 m. Design standards are CE, ISO 8528-5:2005, AS 3000-2018 and AS 3010-2017.\u003c\/p\u003e\n\u003ch3\u003eWhat it will run\u003c\/h3\u003e\n\u003cp\u003eAt 240V the prime rating works out to about 37.5A. Typically that covers lighting, fridges and freezers, a bore or pressure pump, power tools and a split-system air conditioner, as long as the starting loads do not all arrive at once. Pumps, compressors and air conditioners draw several times their running current as they start, so leave headroom for your largest motor. Read each appliance's running and starting power from its compliance plate, then add them up. Size against the prime rating if the set will run regularly: prime allows unlimited annual hours on a variable load, with 10% overload for 1 hour in every 12, while standby is limited to 500 hours a year, with no overload. A home backup connection goes through an inlet and changeover switch installed by a licensed electrician. Send us your load list and we will work through the sizing with you.\u003c\/p\u003e\n\u003cp\u003eThe PL9D1 suits farms, workshops, small commercial premises and building sites, and can back up a home through an outage. Its prime and standby ratings cover regular running as well as emergency use.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul style=\"list-style-position: outside; padding-left: 1.5em; margin-left: 0;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput:\u003c\/strong\u003e 9kVA (9kW) prime, 10kVA (10kW) standby @ 1.0PF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated current:\u003c\/strong\u003e 37 Amps (prime)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine:\u003c\/strong\u003e YangDong YD385D three-cylinder diesel, 1500rpm, water cooled\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlternator:\u003c\/strong\u003e Single phase 4-pole brushless synchronous alternator with AVR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController:\u003c\/strong\u003e ComAp AMF20, two-wire remote start\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStart type:\u003c\/strong\u003e 12 volt electric, battery included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhase \/ voltage:\u003c\/strong\u003e Single phase, 240V, 50Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel:\u003c\/strong\u003e Diesel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel tank:\u003c\/strong\u003e 70 L\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel use:\u003c\/strong\u003e 2.5 L\/hr at prime load\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRun time:\u003c\/strong\u003e 28 hrs continuous at prime load\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise level:\u003c\/strong\u003e 65 dB(A) @ 7m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlets:\u003c\/strong\u003e 3 x 15 Amp and 1 x 32 Amp outlets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardwire terminals:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection:\u003c\/strong\u003e RCD to Australian Standards (IP67 enclosed), over current protection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCanopy:\u003c\/strong\u003e Lockable, sound deadened, weather-resistant powder coat, stainless steel fittings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMine spec:\u003c\/strong\u003e Mine site ready bunding\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (L x W x H):\u003c\/strong\u003e 141 x 72 x 113 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 600 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 12 months or 1,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrime (PRP) limits:\u003c\/strong\u003e Variable load, unlimited annual hours, 10% overload for 1 hour in every 12\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandby (ESP) limits:\u003c\/strong\u003e 500 hours a year, up to 300 hours at a time, no overload\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine configuration:\u003c\/strong\u003e 3 cylinder, 85 x 90 mm bore and stroke, 1.532 L, 18:1 compression, naturally aspirated, direct injection, mechanical governor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine output:\u003c\/strong\u003e 11.0 kWm prime, 12.1 kWm standby\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine capacities:\u003c\/strong\u003e Oil 4.5 L, coolant 3.5 L\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlternator model:\u003c\/strong\u003e PL1E-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlternator construction:\u003c\/strong\u003e 4 pole, 100% copper windings, 2\/3 winding pitch, insulation class H, IP23, shunt self-excitation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage regulation:\u003c\/strong\u003e ±0.5%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection class:\u003c\/strong\u003e IP54\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating conditions:\u003c\/strong\u003e Ambient -25 to 45°C (coolant heater needed below 5°C), humidity below 80%, altitude below 1000 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRating test conditions:\u003c\/strong\u003e 25°C ambient, 100 m altitude, 30% relative humidity\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign standards:\u003c\/strong\u003e CE, ISO 8528-5:2005, AS 3000-2018, AS 3010-2017\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePart of the ABLE Power range at Gen4Sale.\u003c\/p\u003e","brand":"ABLE","offers":[{"title":"Default Title","offer_id":67546745438399,"sku":"PL9D1","price":7378.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/7409\/5295\/files\/ABLE-PL9D1.jpg?v=1791155216"},{"product_id":"11kva-able-diesel-generator-pl11d3","title":"11kVA ABLE Diesel Generator PL11D3","description":"\u003cp\u003eThe PL11D3 is an 11kVA three phase diesel generator rated 11kVA (9kW) prime (PRP) and 11.4kVA (9.4kW) standby (ESP) at 415V, 50Hz and a power factor of 0.8. Power comes from a YangDong YD385D three cylinder diesel, water cooled and turning at 1500 rpm, which drives a four-pole brushless alternator with AVR. It starts electrically at 12 volts with the battery included, and protection is an IP67-enclosed RCD plus over current protection.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe YD385D is naturally aspirated with direct injection and a mechanical governor, so there is no turbocharger to look after.\u003c\/li\u003e\n\u003cli\u003eThe alternator has 100% copper windings, class H insulation and IP23 protection, with voltage regulation of ±0.5%, so the output stays steady as loads come on and off.\u003c\/li\u003e\n\u003cli\u003eA ComAp AMF controller with a two-wire remote start input lets an external switch or controller start the set.\u003c\/li\u003e\n\u003cli\u003eThe fuel tank is built into the base frame, so there is no separate tank to connect.\u003c\/li\u003e\n\u003cli\u003eThe canopy is lockable and sound deadened, with a weather-resistant powder coat and stainless steel fittings.\u003c\/li\u003e\n\u003cli\u003eSound-absorbing cotton and vibration isolators are part of the build, which limits noise and vibration.\u003c\/li\u003e\n\u003cli\u003eAmbient temperatures from -25°C to 45°C are specified (a coolant heater is needed below 5°C), along with humidity below 80% and altitude below 1000 m.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe tank holds 70 litres and noise is 65 dB(A) at 7 m. Outlets are 3 x 15A single phase and 1 x 20A three phase (IP66), with hardwire terminals for a fixed connection. Its design standards are CE, ISO 8528-5:2005, AS 3000-2018 and AS 3010-2017.\u003c\/p\u003e\n\u003ch3\u003eWhat it will run\u003c\/h3\u003e\n\u003cp\u003eThe PL11D3 is a small three phase set. Typically it suits a bore or irrigation pump, a cool room, a packing facility or a workshop with a few machines. Start the largest motor first and add other loads afterwards, because motors draw several times their running current as they start. Check each machine's compliance plate for running and starting power, and spread the load across the three phases. Prime (PRP) allows unlimited annual hours on a variable load with an average load factor below 70% and 10% overload for 1 hour in every 12. Standby (ESP) is limited to 500 hours a year, with an average load factor below 80% and no overload. Before specifying the set, have an electrician assess the site load; a licensed electrician should then connect it to the switchboard. Send us your load list and we will help you pick the right size.\u003c\/p\u003e\n\u003cp\u003eThe PL11D3 suits farms, packing facilities, workshops and small commercial or industrial premises, as standby during a mains outage or as prime power on a site with a variable load.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul style=\"list-style-position: outside; padding-left: 1.5em; margin-left: 0;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput:\u003c\/strong\u003e 11kVA (9kW) prime, 11.4kVA (9.4kW) standby @ 0.8PF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated current:\u003c\/strong\u003e 16 Amps per phase (prime)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine:\u003c\/strong\u003e YangDong YD385D three-cylinder diesel, 1500rpm, water cooled\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlternator:\u003c\/strong\u003e Three phase 4-pole brushless synchronous alternator with AVR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController:\u003c\/strong\u003e ComAp AMF20, two-wire remote start\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStart type:\u003c\/strong\u003e 12 volt electric, battery included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhase \/ voltage:\u003c\/strong\u003e Three phase, 415V, 50Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel:\u003c\/strong\u003e Diesel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel tank:\u003c\/strong\u003e 70 L\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel use:\u003c\/strong\u003e 2.2 L\/hr at prime load\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRun time:\u003c\/strong\u003e 31 hrs continuous at prime load\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise level:\u003c\/strong\u003e 65 dB(A) @ 7m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlets:\u003c\/strong\u003e 3 x 15 Amp single phase and 1 x 20 Amp three phase IP66 outlets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardwire terminals:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection:\u003c\/strong\u003e RCD to Australian Standards (IP67 enclosed), over current protection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCanopy:\u003c\/strong\u003e Lockable, sound deadened, weather-resistant powder coat, stainless steel fittings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (L x W x H):\u003c\/strong\u003e 141 x 73 x 111 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 724 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 12 months or 1,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrime (PRP) limits:\u003c\/strong\u003e Variable load, unlimited annual hours, average load factor below 70% per 24 hours, 10% overload for 1 hour in every 12\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandby (ESP) limits:\u003c\/strong\u003e 500 hours a year, up to 300 hours at a time, average load factor below 80% per 24 hours, no overload\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine configuration:\u003c\/strong\u003e 3 cylinder, 85 x 90 mm bore and stroke, 1.532 L, compression ratio 18, naturally aspirated, direct injection, mechanical governor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine output:\u003c\/strong\u003e 11.0 kWm prime, 12.1 kWm standby\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine capacities:\u003c\/strong\u003e Oil 4.5 L, coolant 3.5 L\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlternator model:\u003c\/strong\u003e PL1E-3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlternator construction:\u003c\/strong\u003e 4 pole, 100% copper windings, 2\/3 winding pitch, insulation class H, IP23, shunt self-excitation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage regulation:\u003c\/strong\u003e ±0.5%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection class:\u003c\/strong\u003e IP54\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating conditions:\u003c\/strong\u003e Ambient -25 to 45°C (coolant heater needed below 5°C), humidity below 80%, altitude below 1000 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRating test conditions:\u003c\/strong\u003e 25°C ambient, 100 m altitude, 30% relative humidity\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign standards:\u003c\/strong\u003e CE, ISO 8528-5:2005, AS 3000-2018, AS 3010-2017\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePart of the ABLE Power range at Gen4Sale.\u003c\/p\u003e","brand":"ABLE","offers":[{"title":"Default Title","offer_id":67546745536703,"sku":"PL11D3","price":7778.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/7409\/5295\/files\/ABLE-PL11D3.jpg?v=1791155218"},{"product_id":"13kva-able-diesel-generator-fs13x1","title":"13kVA ABLE Diesel Generator FS13X1","description":"\u003cp\u003eThe FS13X1 is a single phase diesel generator producing 240V at 50Hz with a power factor of 1.0. It is powered by a FAWDE 4DW81-23D, a four-cylinder, water-cooled diesel running at 1500 rpm, and drives a four-pole brushless synchronous alternator with AVR. A 12 volt battery is included for electric start, and protection is an IP67-enclosed RCD plus over current protection.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAt a power factor of 1.0 the kVA and kW ratings are the same figure, so the full rating is available as kW.\u003c\/li\u003e\n\u003cli\u003eThe brushless alternator has no brushes to replace, and its AVR keeps the voltage steady as the load changes.\u003c\/li\u003e\n\u003cli\u003eAn external switch or controller can start the set through the two-wire remote start input on the ComAp AMF20.\u003c\/li\u003e\n\u003cli\u003eOne 32A and three 15A outlets are rated IP66 (dust tight and protected against powerful water jets), and hardwire terminals are fitted for a fixed connection.\u003c\/li\u003e\n\u003cli\u003eThe canopy is lockable, which restricts access to the set, and it is sound deadened with a weather-resistant powder coat and stainless steel fittings.\u003c\/li\u003e\n\u003cli\u003eMine site ready bunding is included to contain fuel spills on sites that need it.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNoise is 63 dB(A) at 7 m. Prime power is available for an unlimited number of annual hours on a variable load.\u003c\/p\u003e\n\u003ch3\u003eWhat it will run\u003c\/h3\u003e\n\u003cp\u003eThe FS13X1 supplies single phase power at 240V with a rated current of about 54A. Typically that suits a workshop, a farm with pumps and power tools, a small shop or office, or the essential circuits of a home: lighting, fridges and freezers, a pressure pump and an air conditioner. An air conditioner, compressor or pump can draw several times its running current at start-up, so leave room for the largest motor you plan to start. Check each appliance's compliance plate for its running and starting power, add the figures up, and keep the total within the output of the set. If the set is for home backup, a licensed electrician should install the inlet and changeover switch it connects through. Send through your load list and we will help you choose the right size.\u003c\/p\u003e\n\u003cp\u003eThe FS13X1 suits farms, workshops, small commercial premises and home backup on single phase. It can provide emergency power during a mains outage, or work on a variable load as a prime power source.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul style=\"list-style-position: outside; padding-left: 1.5em; margin-left: 0;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput:\u003c\/strong\u003e 13kVA (13kW) prime, 14kVA (14kW) standby @ 1.0PF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated current:\u003c\/strong\u003e 54 Amps (prime)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine:\u003c\/strong\u003e FAWDE four-cylinder diesel, 1500rpm, water cooled\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlternator:\u003c\/strong\u003e Single phase 4-pole brushless synchronous alternator with AVR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController:\u003c\/strong\u003e ComAp AMF20, two-wire remote start\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStart type:\u003c\/strong\u003e 12 volt electric, battery included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhase \/ voltage:\u003c\/strong\u003e Single phase, 240V, 50Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel:\u003c\/strong\u003e Diesel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel tank:\u003c\/strong\u003e 90 L\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel use:\u003c\/strong\u003e 3 L\/hr at prime load\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRun time:\u003c\/strong\u003e 30 hrs continuous at prime load\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise level:\u003c\/strong\u003e 63 dB(A) @ 7m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlets:\u003c\/strong\u003e 1 x 32 Amp and 3 x 15 Amp IP66 outlets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardwire terminals:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection:\u003c\/strong\u003e RCD to Australian Standards (IP67 enclosed), over current protection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCanopy:\u003c\/strong\u003e Lockable, sound deadened, weather-resistant powder coat, stainless steel fittings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMine spec:\u003c\/strong\u003e Mine site ready bunding\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (L x W x H):\u003c\/strong\u003e 163 x 76 x 117 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 740 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 12 months or 1,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine model:\u003c\/strong\u003e FAWDE 4DW81-23D\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine output:\u003c\/strong\u003e 17.0 kW prime, 19.0 kW standby\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrime (PRP) availability:\u003c\/strong\u003e Unlimited annual hours on a variable load\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePart of the ABLE Power range at Gen4Sale.\u003c\/p\u003e","brand":"ABLE","offers":[{"title":"Default Title","offer_id":67546745635007,"sku":"FS13X1","price":8378.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/7409\/5295\/files\/ABLE-FS13X1.jpg?v=1791155220"},{"product_id":"17kva-able-diesel-generator-pl17x3","title":"17kVA ABLE Diesel Generator PL17X3","description":"\u003cp\u003eThe PL17X3 is a 17kVA three phase diesel generator rated 17kVA (13.6kW) prime (PRP) and 18.7kVA standby (ESP) at 415V, 50Hz and a power factor of 0.8. Its engine is a FAWDE 4DW81-23D, a four cylinder, water-cooled diesel of 2.16 litres running at 1500 rpm, and it drives a four-pole brushless synchronous alternator with AVR. The 12 volt electric start comes with the battery, and an IP67-enclosed RCD and over current protection are fitted.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe engine is naturally aspirated with direct injection and a mechanical governor, so it has no turbocharger or electronic governor.\u003c\/li\u003e\n\u003cli\u003eThe alternator has class H insulation and IP23 protection, and it holds voltage within ±0.5%, so the output stays steady as loads change.\u003c\/li\u003e\n\u003cli\u003eThe set can be started remotely: the ComAp AMF controller has a two-wire start input for an external switch or controller.\u003c\/li\u003e\n\u003cli\u003eThe lockable canopy has sound absorption and the base frame has vibration isolators, which limits noise and vibration.\u003c\/li\u003e\n\u003cli\u003eThree 15A single phase outlets and one 20A three phase outlet are rated IP66 (dust tight and protected against powerful water jets), and hardwire terminals are fitted for a fixed connection.\u003c\/li\u003e\n\u003cli\u003eThe set has mine site ready bunding for sites that need fuel spills contained.\u003c\/li\u003e\n\u003cli\u003eAmbient temperatures from -25°C to 45°C are specified, with a coolant heater needed below 5°C, along with humidity below 80% and altitude below 1000 m.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe tank holds 125 litres and noise is 65.6 dB(A) at 7 m.\u003c\/p\u003e\n\u003ch3\u003eWhat it will run\u003c\/h3\u003e\n\u003cp\u003eThe PL17X3 is a small three phase set. Typically it suits a mechanical or fabrication workshop, irrigation and grain handling on a farm, or a commercial kitchen. Start the largest motor first and add other loads afterwards, because motors draw several times their running current as they start, and keep the three phases balanced. Running and starting power are shown on each machine's compliance plate. Prime (PRP) is available for unlimited annual hours on a variable load, with an average load factor under 70% over 24 hours and 10% overload for 1 hour in every 12. Standby (ESP) is limited to 500 hours a year, with an average load factor under 80% and no overload. Get an electrician to assess the site load before the set is specified, and a licensed electrician to connect it to the switchboard. Send us your load list and we will help you work out the right size.\u003c\/p\u003e\n\u003cp\u003eThe PL17X3 suits farms, workshops, commercial kitchens and light industrial sites. It can stand by for a mains outage or serve as prime power on a variable load.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul style=\"list-style-position: outside; padding-left: 1.5em; margin-left: 0;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput:\u003c\/strong\u003e 17kVA (13.6kW) prime, 18.7kVA (15kW) standby @ 0.8PF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated current:\u003c\/strong\u003e 24 Amps per phase (prime)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine:\u003c\/strong\u003e FAWDE 4DW81-23D four-cylinder diesel, 1500rpm, water cooled\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlternator:\u003c\/strong\u003e Three phase 4-pole brushless synchronous alternator with AVR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController:\u003c\/strong\u003e ComAp AMF20, two-wire remote start\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStart type:\u003c\/strong\u003e 12 volt electric, battery included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhase \/ voltage:\u003c\/strong\u003e Three phase, 415V, 50Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel:\u003c\/strong\u003e Diesel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel tank:\u003c\/strong\u003e 125 L\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel use:\u003c\/strong\u003e 4.3 L\/hr at prime load\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRun time:\u003c\/strong\u003e 30 hrs continuous at prime load\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise level:\u003c\/strong\u003e 65.6 dB(A) @ 7m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlets:\u003c\/strong\u003e 3 x 15 Amp single phase and 1 x 20 Amp three phase IP66 outlets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardwire terminals:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection:\u003c\/strong\u003e RCD to Australian Standards (IP67 enclosed), over current protection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCanopy:\u003c\/strong\u003e Lockable, sound deadened, weather-resistant powder coat, stainless steel fittings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMine spec:\u003c\/strong\u003e Mine site ready bunding\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (L x W x H):\u003c\/strong\u003e 163 x 76 x 116 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 804 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 12 months or 1,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrime (PRP) limits:\u003c\/strong\u003e Variable load, unlimited annual hours, average load factor under 70% over 24 hours, 10% overload for 1 hour in every 12\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandby (ESP) limits:\u003c\/strong\u003e 500 hours a year, up to 300 hours at a time, average load factor under 80%, no overload\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine configuration:\u003c\/strong\u003e 4 cylinder, 85 x 95 mm bore and stroke, 2.16 L, compression ratio 18, naturally aspirated, direct injection, mechanical governor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine output:\u003c\/strong\u003e 17.0 kWm prime, 19.0 kWm standby\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine capacities:\u003c\/strong\u003e Oil 8.0 L, coolant 8.0 L\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlternator model:\u003c\/strong\u003e PL1F-3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlternator construction:\u003c\/strong\u003e 4 pole, 2\/3 winding pitch, insulation class H, IP23\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage regulation:\u003c\/strong\u003e ±0.5%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection class:\u003c\/strong\u003e IP54\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating conditions:\u003c\/strong\u003e Ambient -25 to 45°C (coolant heater needed below 5°C), humidity below 80%, altitude below 1000 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRating test conditions:\u003c\/strong\u003e 25°C ambient, 100 m altitude, 30% relative humidity\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards:\u003c\/strong\u003e CE, ISO 8528-5:2005, AS 3000-2018, AS 3010-2017\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePart of the ABLE Power range at Gen4Sale.\u003c\/p\u003e","brand":"ABLE","offers":[{"title":"Default Title","offer_id":67546745667775,"sku":"PL17X3","price":8578.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/7409\/5295\/files\/ABLE-PL17X3.jpg?v=1791155221"},{"product_id":"18kva-able-diesel-generator-pl18x1","title":"18kVA ABLE Diesel Generator PL18X1","description":"\u003cp\u003eThe PL18X1 is an 18kVA single phase diesel generator rated 18kVA (18kW) prime (PRP) and 20kVA (20kW) standby (ESP) at 240V, 50Hz and a power factor of 1.0. Power comes from a FAWDE 4DW91-29D, a four cylinder, water-cooled diesel turning at 1500 rpm, which drives a four-pole brushless synchronous alternator with AVR. The set starts electrically at 12 volts, the battery is included, and protection comes from an IP67-enclosed RCD and over current protection.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe engine is a naturally aspirated 2.54 litre four-cylinder, so there is no turbocharger in the build.\u003c\/li\u003e\n\u003cli\u003eThe alternator is brushless, with no brushes to wear, and its AVR holds voltage within ±0.5% as the load changes.\u003c\/li\u003e\n\u003cli\u003eThe ComAp AMF controller accepts a two-wire remote start, so a switch or external controller can start the set.\u003c\/li\u003e\n\u003cli\u003eThe canopy is sound deadened and finished in a weather-resistant powder coat, with stainless steel fittings and a lock.\u003c\/li\u003e\n\u003cli\u003eThree 15A outlets are rated IP66 (dust tight and protected against powerful water jets), and hardwire terminals are fitted for a fixed connection.\u003c\/li\u003e\n\u003cli\u003eMine site ready bunding is specified for sites that need fuel spills contained.\u003c\/li\u003e\n\u003cli\u003eThe set is specified for ambient temperatures from -25°C to 45°C (a coolant heater is needed below 5°C), humidity under 80% and altitude under 1000 m.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe tank holds 125 litres and noise is 65 dB(A) at 7 m. The design standards are CE, ISO 8528-5:2005, AS 3000-2018 and AS 3010-2017.\u003c\/p\u003e\n\u003ch3\u003eWhat it will run\u003c\/h3\u003e\n\u003cp\u003eAt 240V the PL18X1 has a rated current of about 75A. Typically that suits a workshop with several machines, a farm with pumps and outbuildings, a single phase commercial premises, or the essential circuits of a home. Starting current is the catch: a pump, compressor or air conditioner can draw several times its running current as it starts, so size around the largest motor. Check each appliance's compliance plate for its running and starting power, then add the figures up. Prime (PRP) allows unlimited hours on a variable load, with an average load factor below 70% per 24 hours and 10% overload for 1 hour in every 12. Standby (ESP) is limited to 500 hours a year, with an average load factor below 80% per 24 hours and no overload. Home backup needs an inlet and changeover switch fitted by a licensed electrician. If you send us your load list, we will help you size the set.\u003c\/p\u003e\n\u003cp\u003eThe PL18X1 suits farms, workshops, single phase commercial premises, small industrial sites and home backup. It can cover a mains outage as standby power, or run as prime power on a variable load.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul style=\"list-style-position: outside; padding-left: 1.5em; margin-left: 0;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput:\u003c\/strong\u003e 18kVA (18kW) prime, 20kVA (20kW) standby @ 1.0PF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated current:\u003c\/strong\u003e 75 Amps (prime)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine:\u003c\/strong\u003e FAWDE 4DW91-29D four-cylinder diesel, 1500rpm, water cooled\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlternator:\u003c\/strong\u003e Single phase 4-pole brushless synchronous alternator with AVR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController:\u003c\/strong\u003e ComAp AMF20, two-wire remote start\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStart type:\u003c\/strong\u003e 12 volt electric, battery included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhase \/ voltage:\u003c\/strong\u003e Single phase, 240V, 50Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel:\u003c\/strong\u003e Diesel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel tank:\u003c\/strong\u003e 125 L\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel use:\u003c\/strong\u003e 4.5 L\/hr at prime load\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRun time:\u003c\/strong\u003e 27 hrs continuous at prime load\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise level:\u003c\/strong\u003e 65 dB(A) @ 7m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlets:\u003c\/strong\u003e 3 x 15 Amp IP66 outlets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardwire terminals:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection:\u003c\/strong\u003e RCD to Australian Standards (IP67 enclosed), over current protection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCanopy:\u003c\/strong\u003e Lockable, sound deadened, weather-resistant powder coat, stainless steel fittings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMine spec:\u003c\/strong\u003e Mine site ready bunding\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (L x W x H):\u003c\/strong\u003e 167 x 76 x 117 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 866 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 12 months or 1,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrime (PRP) limits:\u003c\/strong\u003e Variable load, unlimited hours, average load factor below 70% per 24 hours, 10% overload for 1 hour in every 12\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandby (ESP) limits:\u003c\/strong\u003e 500 hours a year, up to 300 hours at a time, average load factor below 80% per 24 hours, no overload\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine configuration:\u003c\/strong\u003e 4 cylinder, 90 x 100 mm bore and stroke, 2.54 L, compression ratio 17, naturally aspirated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine output:\u003c\/strong\u003e 21.0 kWm prime, 23.0 kWm standby\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine capacities:\u003c\/strong\u003e Oil 8.0 L, coolant 8.0 L\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlternator model:\u003c\/strong\u003e PL1G-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage regulation:\u003c\/strong\u003e ±0.5%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection class:\u003c\/strong\u003e IP54\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating conditions:\u003c\/strong\u003e Ambient -25 to 45°C (coolant heater needed below 5°C), humidity below 80%, altitude below 1000 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRating test conditions:\u003c\/strong\u003e 25°C ambient, 100 m altitude, 30% relative humidity\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign standards:\u003c\/strong\u003e CE, ISO 8528-5:2005, AS 3000-2018, AS 3010-2017\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePart of the ABLE Power range at Gen4Sale.\u003c\/p\u003e","brand":"ABLE","offers":[{"title":"Default Title","offer_id":67546747928767,"sku":"PL18X1","price":9178.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/7409\/5295\/files\/ABLE-PL18X1.jpg?v=1791155372"},{"product_id":"22kva-able-diesel-generator-fs22x3","title":"22kVA ABLE Diesel Generator FS22X3","description":"\u003cp\u003eThe FS22X3 is a three phase diesel generator producing 415V at 50Hz with a power factor of 0.8. It is powered by a FAWDE 4DW91-29D, a four-cylinder, water-cooled diesel running at 1500 rpm, and drives a four-pole brushless synchronous alternator with AVR. Electric start is 12 volt and the battery is included. Protection is an IP67-enclosed RCD plus over current protection.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe alternator is brushless with IP23 protection, so there are no brushes to wear, and its AVR holds the output voltage steady as the load changes.\u003c\/li\u003e\n\u003cli\u003eRemote start is available through the two-wire input on the ComAp AMF20 controller, which an external switch or controller can operate.\u003c\/li\u003e\n\u003cli\u003eOne 32A and one 20A three phase outlet and two 15A single phase outlets are rated IP66 (dust tight and protected against powerful water jets), and hardwire terminals are fitted for a fixed connection.\u003c\/li\u003e\n\u003cli\u003eThe canopy locks and is sound deadened, finished in a weather-resistant powder coat with stainless steel fittings.\u003c\/li\u003e\n\u003cli\u003eMine site ready bunding is in the specification, so fuel spills stay contained on sites that need it.\u003c\/li\u003e\n\u003cli\u003eAmbient temperatures from -25°C to 50°C are specified, with a coolant heater needed below 5°C, which covers hot sites as well as cold starts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNoise is 65 dB(A) at 7 m.\u003c\/p\u003e\n\u003ch3\u003eWhat it will run\u003c\/h3\u003e\n\u003cp\u003eThe FS22X3 is a three phase set for farms, workshops and commercial sites, so frame the choice around the machines that need to start rather than single appliances. Typically it suits irrigation pumps, cool rooms, workshop machines and processing equipment. At a power factor of 0.8, add up the loads in kW as well as kVA. Large motors should start first, with other loads added afterwards, since motors draw several times their running current as they start. Spread the load evenly across the three phases. Use the compliance plate on each machine to find its running and starting power. An electrician should assess the site load before the set is specified, and connection to a switchboard should be made by a licensed electrician. Send us your load list and we will go through the sizing with you.\u003c\/p\u003e\n\u003cp\u003eThe FS22X3 suits farms, workshops, small factories and commercial premises, as standby power during a mains outage or as prime power on a variable load.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul style=\"list-style-position: outside; padding-left: 1.5em; margin-left: 0;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput:\u003c\/strong\u003e 22kVA (18kW) prime, 24kVA (20kW) standby @ 0.8PF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated current:\u003c\/strong\u003e 31 Amps per phase (prime)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine:\u003c\/strong\u003e FAWDE four-cylinder diesel, 1500rpm, water cooled\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlternator:\u003c\/strong\u003e Three phase 4-pole brushless synchronous alternator with AVR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController:\u003c\/strong\u003e ComAp AMF20, two-wire remote start\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStart type:\u003c\/strong\u003e 12 volt electric, battery included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhase \/ voltage:\u003c\/strong\u003e Three phase, 415V, 50Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel:\u003c\/strong\u003e Diesel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel tank:\u003c\/strong\u003e 90 L\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel use:\u003c\/strong\u003e 4.5 L\/hr at prime load\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRun time:\u003c\/strong\u003e 20 hrs continuous at prime load\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise level:\u003c\/strong\u003e 65 dB(A) @ 7m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlets:\u003c\/strong\u003e 1 x 32 Amp and 1 x 20 Amp three phase and 2 x 15 Amp single phase IP66 outlets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardwire terminals:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection:\u003c\/strong\u003e RCD to Australian Standards (IP67 enclosed), over current protection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCanopy:\u003c\/strong\u003e Lockable, sound deadened, weather-resistant powder coat, stainless steel fittings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMine spec:\u003c\/strong\u003e Mine site ready bunding\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (L x W x H):\u003c\/strong\u003e 167 x 76 x 117 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 770 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 12 months or 1,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine model:\u003c\/strong\u003e FAWDE 4DW91-29D\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine output:\u003c\/strong\u003e 21.0 kW prime, 23.0 kW standby\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlternator protection class:\u003c\/strong\u003e IP23\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating conditions:\u003c\/strong\u003e Ambient -25 to 50°C (coolant heater needed below 5°C)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards:\u003c\/strong\u003e CE, ISO 8528-5\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePart of the ABLE Power range at Gen4Sale.\u003c\/p\u003e","brand":"ABLE","offers":[{"title":"Default Title","offer_id":67546747994303,"sku":"FS22X3","price":8878.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/7409\/5295\/files\/ABLE-FS22X3.jpg?v=1791155374"},{"product_id":"24kva-able-diesel-generator-fs24x1","title":"24kVA ABLE Diesel Generator FS24X1","description":"\u003cp\u003eThe FS24X1 is a 24kVA single phase diesel generator rated 24kVA (24kW) prime (PRP) and 26kVA (26kW) standby (ESP) at 240V, 50Hz and a power factor of 1.0. It is powered by a FAWDE 4DW92-39D, a four-cylinder, turbocharged, water-cooled diesel running at 1500 rpm, and drives a four-pole brushless synchronous alternator with AVR. A battery is included for the 12 volt electric start, and the set has an IP67-enclosed RCD and over current protection.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe alternator has a 184G frame, 100% copper windings and IP23 protection, and its AVR holds the output voltage steady as the load changes.\u003c\/li\u003e\n\u003cli\u003eAn electric governor regulates engine speed, which keeps the 50Hz frequency steady as loads come on and off.\u003c\/li\u003e\n\u003cli\u003eThe 12 volt, 60 Ah battery comes with a charger and a lockable isolator, so it stays charged and can be isolated and locked off.\u003c\/li\u003e\n\u003cli\u003eThe ComAp AMF20 controller accepts a two-wire remote start, so a switch or external controller can start the set.\u003c\/li\u003e\n\u003cli\u003eThe lockable canopy is sound deadened and powder coated, and vibration isolators separate the engine and alternator from the steel base frame, which limits vibration.\u003c\/li\u003e\n\u003cli\u003eThe three 15A outlets are rated IP66 (dust tight and protected against powerful water jets), and hardwire terminals allow a fixed connection.\u003c\/li\u003e\n\u003cli\u003eA 50°C radiator and an ambient range of -25°C to 50°C are specified, with a coolant heater needed below 5°C.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe tank holds 130 litres, and the specification includes mine site ready bunding for containing fuel spills. Noise is 63 dB(A) at 7 m. The engine is rated 29.0 kW prime and 32.0 kW standby.\u003c\/p\u003e\n\u003ch3\u003eWhat it will run\u003c\/h3\u003e\n\u003cp\u003eAt 240V the FS24X1 has a rated current of 100A, and at a power factor of 1.0 the kVA and kW figures are the same. Typically that suits a rural store or service station, a farm with pumps and outbuildings, a workshop, or the essential circuits of a large home. The largest motor decides the headroom you need, because pumps, compressors and air conditioners draw several times their running current as they start. Each appliance's compliance plate gives its running and starting power. Prime (PRP) is available for unlimited annual hours on a variable load, with 10% overload for 1 hour in every 12. Standby (ESP) covers emergency use during mains outages, with no overload. Connecting to a home takes an inlet and changeover switch installed by a licensed electrician. Send us your load list and we will help you match the set to your loads.\u003c\/p\u003e\n\u003cp\u003eThe FS24X1 suits farms, workshops, rural stores, commercial and light industrial premises and home backup on single phase, either as standby power for mains outages or as prime power on a variable load.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul style=\"list-style-position: outside; padding-left: 1.5em; margin-left: 0;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput:\u003c\/strong\u003e 24kVA (24kW) prime, 26kVA (26kW) standby @ 1.0PF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated current:\u003c\/strong\u003e 100 Amps (prime)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine:\u003c\/strong\u003e FAWDE four-cylinder turbo diesel, 1500rpm, water cooled\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlternator:\u003c\/strong\u003e Single phase 4-pole brushless synchronous alternator with AVR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController:\u003c\/strong\u003e ComAp AMF20, two-wire remote start\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStart type:\u003c\/strong\u003e 12 volt electric, battery included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhase \/ voltage:\u003c\/strong\u003e Single phase, 240V, 50Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel:\u003c\/strong\u003e Diesel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel tank:\u003c\/strong\u003e 130 L\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel use:\u003c\/strong\u003e 6.5 L\/hr at prime load\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRun time:\u003c\/strong\u003e 20 hrs continuous at prime load\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise level:\u003c\/strong\u003e 63 dB(A) @ 7m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlets:\u003c\/strong\u003e 3 x 15 Amp IP66 outlets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardwire terminals:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection:\u003c\/strong\u003e RCD to Australian Standards (IP67 enclosed), over current protection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCanopy:\u003c\/strong\u003e Lockable, sound deadened, weather-resistant powder coat, stainless steel fittings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMine spec:\u003c\/strong\u003e Mine site ready bunding\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (L x W x H):\u003c\/strong\u003e 185 x 76 x 118 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 850 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 12 months or 1,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrime (PRP) availability:\u003c\/strong\u003e Unlimited annual hours on a variable load, 10% overload for 1 hour in every 12\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandby (ESP) use:\u003c\/strong\u003e Emergency use during mains outages, no overload, no parallel operation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine model:\u003c\/strong\u003e FAWDE 4DW92-39D\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine configuration:\u003c\/strong\u003e 4 cylinder, 2.54 L, turbocharged\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine output:\u003c\/strong\u003e 29.0 kW prime, 32.0 kW standby\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlternator construction:\u003c\/strong\u003e 184G frame, 100% copper windings, IP23\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGovernor and excitation:\u003c\/strong\u003e Electric governor, self-excited shunt excitation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery and charger:\u003c\/strong\u003e 12 V 60 Ah battery with charger and lockable battery isolator\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOther fitted features:\u003c\/strong\u003e 50°C radiator, steel base frame, anti-vibration mounts, dry air filter, fuel drain points\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating conditions:\u003c\/strong\u003e Ambient -25 to 50°C (coolant heater needed below 5°C), humidity below 80%, altitude below 1000 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards:\u003c\/strong\u003e CE marking, ISO 8528-5:2005, GB\/T 2820.5-2009\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePart of the ABLE Power range at Gen4Sale.\u003c\/p\u003e","brand":"ABLE","offers":[{"title":"Default Title","offer_id":67546748059839,"sku":"FS24X1","price":10878.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/7409\/5295\/files\/ABLE-FS24X1.jpg?v=1791155375"},{"product_id":"30kva-able-diesel-generator-fs30x3","title":"30kVA ABLE Diesel Generator FS30X3","description":"\u003cp\u003eThe FS30X3 is a 30kVA three phase diesel generator rated 30kVA (24kW) prime (PRP) and 33kVA (26kW) standby (ESP) at 415V, 50Hz and a power factor of 0.8. It is powered by a FAWDE 4DW92-39D, a four-cylinder, turbocharged, water-cooled diesel running at 1500 rpm, and drives a four-pole brushless synchronous alternator with AVR. Electric start at 12 volts uses the included battery, and protection is an IP67-enclosed RCD plus over current protection.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe alternator has class H insulation and IP23 protection, and its AVR holds the output voltage steady as loads change.\u003c\/li\u003e\n\u003cli\u003eThe electric governor holds engine speed, and with it the 50Hz frequency, as loads come on and off.\u003c\/li\u003e\n\u003cli\u003eA charger keeps the 12 volt, 60 Ah battery topped up, and a lockable isolator lets it be disconnected and locked off.\u003c\/li\u003e\n\u003cli\u003eThe ComAp AMF20 controller has a two-wire remote start input, and an emergency stop is fitted.\u003c\/li\u003e\n\u003cli\u003eThe canopy is lockable, sound deadened, galvanised and powder coated, and the steel base frame has vibration isolators.\u003c\/li\u003e\n\u003cli\u003eOne 32A and one 20A three phase outlet and two 15A single phase outlets are rated IP66 (dust tight and protected against powerful water jets), with hardwire terminals for a fixed connection.\u003c\/li\u003e\n\u003cli\u003eThe 130 litre fuel tank is bunded, and the specification includes mine site ready bunding for sites that need fuel spills contained.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNoise is 63 dB(A) at 7 m. The engine is rated 29.0 kW prime and 32.0 kW standby. Ambient temperatures from -25°C to 50°C are specified, with a coolant heater needed below 5°C, along with humidity below 80% and altitude below 1000 m.\u003c\/p\u003e\n\u003ch3\u003eWhat it will run\u003c\/h3\u003e\n\u003cp\u003eAt 24kW prime the FS30X3 has a rated current of about 42A per phase. Typically it suits irrigation pumps, a grain dryer, a commercial kitchen, a workshop with machining equipment, or the essential loads of a small business park. Motors draw several times their running current as they start, so start the largest first, add the other loads in steps and keep the three phases balanced. Gather the running and starting power from each machine's compliance plate. Prime (PRP) allows unlimited annual hours on a variable load, with 10% overload for 1 hour in every 12. Standby (ESP) is for emergency use during mains outages, with no overload. Have an electrician assess the site load before you specify the set, and have a licensed electrician make the switchboard connection. Send us your load list and we can help with sizing.\u003c\/p\u003e\n\u003cp\u003eThe FS30X3 suits three phase sites with heavier loads: farms, commercial kitchens and clubs, workshops and small business parks. It can provide standby power in a mains outage or prime power on a variable load.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul style=\"list-style-position: outside; padding-left: 1.5em; margin-left: 0;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput:\u003c\/strong\u003e 30kVA (24kW) prime, 33kVA (26kW) standby @ 0.8PF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated current:\u003c\/strong\u003e 42 Amps per phase (prime)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine:\u003c\/strong\u003e FAWDE four-cylinder turbo diesel, 1500rpm, water cooled\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlternator:\u003c\/strong\u003e Three phase 4-pole brushless synchronous alternator with AVR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController:\u003c\/strong\u003e ComAp AMF20, two-wire remote start\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStart type:\u003c\/strong\u003e 12 volt electric, battery included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhase \/ voltage:\u003c\/strong\u003e Three phase, 415V, 50Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel:\u003c\/strong\u003e Diesel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel tank:\u003c\/strong\u003e 130 L\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel use:\u003c\/strong\u003e 6.5 L\/hr at prime load\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRun time:\u003c\/strong\u003e 20 hrs continuous at prime load\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise level:\u003c\/strong\u003e 63 dB(A) @ 7m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlets:\u003c\/strong\u003e 1 x 32 Amp and 1 x 20 Amp three phase and 2 x 15 Amp single phase IP66 outlets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardwire terminals:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection:\u003c\/strong\u003e RCD to Australian Standards (IP67 enclosed), over current protection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCanopy:\u003c\/strong\u003e Lockable, sound deadened, weather-resistant powder coat, stainless steel fittings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMine spec:\u003c\/strong\u003e Mine site ready bunding\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (L x W x H):\u003c\/strong\u003e 185 x 76 x 118 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 850 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 12 months or 1,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrime (PRP) availability:\u003c\/strong\u003e Unlimited annual hours on a variable load, 10% overload for 1 hour in every 12\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandby (ESP) use:\u003c\/strong\u003e Emergency use during mains outages, no overload, no parallel operation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine model:\u003c\/strong\u003e FAWDE 4DW92-39D\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine configuration:\u003c\/strong\u003e 4 cylinder, 90 x 100 mm bore and stroke, 2.54 L, compression ratio 17.0:1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine output:\u003c\/strong\u003e 29.0 kW prime, 32.0 kW standby\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine capacities:\u003c\/strong\u003e Oil 8.0 L, coolant 8.0 L\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlternator construction:\u003c\/strong\u003e 184G frame, 4 pole, insulation class H, IP23\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGovernor and excitation:\u003c\/strong\u003e Electric governor, self-excited shunt excitation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery and charger:\u003c\/strong\u003e 12 V 60 Ah battery with charger and lockable battery isolator\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOther fitted features:\u003c\/strong\u003e Emergency stop, galvanised and powder-coated canopy, 50°C radiator, steel base frame with vibration isolators, bunded 130 L fuel tank\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating conditions:\u003c\/strong\u003e Ambient -25 to 50°C (coolant heater needed below 5°C), humidity below 80%, altitude below 1000 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards:\u003c\/strong\u003e CE certification, ISO 8528-5:2005, GB\/T 2820.5-2009, ISO 3046\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePart of the ABLE Power range at Gen4Sale.\u003c\/p\u003e","brand":"ABLE","offers":[{"title":"Default Title","offer_id":67546748125375,"sku":"FS30X3","price":10678.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/7409\/5295\/files\/ABLE-FS30X3.jpg?v=1791155377"},{"product_id":"35kva-able-diesel-generator-pl35x1","title":"35kVA ABLE Diesel Generator PL35X1","description":"\u003cp\u003eThe PL35X1 is a 35kVA single phase diesel generator rated 35kVA (35kW) prime (PRP) and 38kVA (38kW) standby (ESP) at 240V, 50Hz and a power factor of 1.0. Its engine is a Xinchai 4D35ZD, a four cylinder, water-cooled diesel of 3.5 litres running at 1500 rpm, and it drives a four-pole brushless synchronous alternator with AVR. With 12 volt electric start and the battery included, the set also has an IP67-enclosed RCD and over current protection.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe engine is naturally aspirated with direct injection and a mechanical governor, so it has no turbocharger.\u003c\/li\u003e\n\u003cli\u003eThe alternator has 100% copper windings, class H insulation and IP23 protection, and it holds voltage within ±0.5%, so the output stays steady as loads change.\u003c\/li\u003e\n\u003cli\u003eA ComAp AMF controller with a two-wire remote start input lets a switch or external controller start the set.\u003c\/li\u003e\n\u003cli\u003eThe canopy is lockable and sound deadened, with a weather-resistant powder coat and stainless steel fittings.\u003c\/li\u003e\n\u003cli\u003eThree 15A outlets have an IP66 rating (dust tight and protected against powerful water jets), and hardwire terminals suit a fixed connection.\u003c\/li\u003e\n\u003cli\u003eMine site ready bunding is included in the specification to contain fuel spills.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAt about 10 litres an hour at prime load, a full 290 litre tank gives about 29 hours of running. Noise is 66.1 dB(A) at 7 m. Its design standards are CE, ISO 8528-5:2005, AS 3000-2018 and AS 3010-2017.\u003c\/p\u003e\n\u003ch3\u003eWhat it will run\u003c\/h3\u003e\n\u003cp\u003eAt 240V the PL35X1 has a rated current of about 145A, and at a power factor of 1.0 the kVA and kW figures are the same. It is a large single phase set, so frame the choice around the loads of the site rather than single appliances. Typically it suits a rural property on single phase supply, a large homestead, a single phase commercial building with refrigeration and air conditioning, or a workshop. Motors in pumps, compressors and air conditioners can draw several times their running current as they start, so allow headroom for the largest. Check each appliance's compliance plate for its running and starting power. An electrician should assess the site load before the set is specified, and connection to a switchboard or for home backup should be made through an inlet and changeover switch installed by a licensed electrician. Share your load list with us and we will help with sizing.\u003c\/p\u003e\n\u003cp\u003eThe PL35X1 suits farms, workshops, single phase commercial and light industrial premises and large homes. Having prime and standby ratings, it can stand in during a mains outage or supply a site that runs it regularly.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul style=\"list-style-position: outside; padding-left: 1.5em; margin-left: 0;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput:\u003c\/strong\u003e 35kVA (35kW) prime, 38kVA (38kW) standby @ 1.0PF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated current:\u003c\/strong\u003e 145 Amps (prime)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine:\u003c\/strong\u003e Xinchai 4D35ZD four-cylinder diesel, 1500rpm, water cooled\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlternator:\u003c\/strong\u003e Single phase 4-pole brushless synchronous alternator with AVR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController:\u003c\/strong\u003e ComAp AMF20, two-wire remote start\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStart type:\u003c\/strong\u003e 12 volt electric, battery included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhase \/ voltage:\u003c\/strong\u003e Single phase, 240V, 50Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel:\u003c\/strong\u003e Diesel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel tank:\u003c\/strong\u003e 290 L\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel use:\u003c\/strong\u003e 10 L\/hr at prime load\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRun time:\u003c\/strong\u003e 29 hrs continuous at prime load\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise level:\u003c\/strong\u003e 66.1 dB(A) @ 7m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlets:\u003c\/strong\u003e 3 x 15 Amp IP66 outlets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardwire terminals:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection:\u003c\/strong\u003e RCD to Australian Standards (IP67 enclosed), over current protection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCanopy:\u003c\/strong\u003e Lockable, sound deadened, weather-resistant powder coat, stainless steel fittings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMine spec:\u003c\/strong\u003e Mine site ready bunding\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (L x W x H):\u003c\/strong\u003e 210 x 95 x 152 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1,312 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 12 months or 1,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine configuration:\u003c\/strong\u003e 4 cylinder, 98 x 115 mm bore and stroke, 3.5 L, compression ratio 18.5, naturally aspirated, direct injection, mechanical governor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine output:\u003c\/strong\u003e 49.0 kWm prime, 54.0 kWm standby\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine capacities:\u003c\/strong\u003e Oil 7.0 L, coolant 5.6 L\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlternator model:\u003c\/strong\u003e PL2C-1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlternator construction:\u003c\/strong\u003e 4 pole, 100% copper windings, 2\/3 winding pitch, insulation class H, IP23, shunt self-excitation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage regulation:\u003c\/strong\u003e ±0.5%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection class:\u003c\/strong\u003e IP54\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRating test conditions:\u003c\/strong\u003e 25°C ambient, 100 m altitude, 30% relative humidity\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign standards:\u003c\/strong\u003e CE, ISO 8528-5:2005, AS 3000-2018, AS 3010-2017\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePart of the ABLE Power range at Gen4Sale.\u003c\/p\u003e","brand":"ABLE","offers":[{"title":"Default Title","offer_id":67546748158143,"sku":"PL35X1","price":14869.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/7409\/5295\/files\/ABLE-PL35X1.jpg?v=1791155378"},{"product_id":"50kva-able-diesel-generator-pl50x3","title":"50kVA ABLE Diesel Generator PL50X3","description":"\u003cp\u003eThe PL50X3 is a 50kVA three phase diesel generator rated 50kVA (40kW) prime (PRP) and 55kVA (44kW) standby (ESP) at 415V, 50Hz and a power factor of 0.8. It is powered by a Xinchai 4D35ZD, a four cylinder, water-cooled diesel of 3.5 litres running at 1500 rpm, and drives a four-pole brushless synchronous alternator with AVR. It starts electrically on 12 volts from the included battery, and protection is an IP67-enclosed RCD plus over current protection.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe alternator is built with class H insulation and IP23 protection, and voltage regulation of ±0.5% keeps the output steady as loads change.\u003c\/li\u003e\n\u003cli\u003eA switch or external controller can start the set through the ComAp AMF controller's two-wire remote start.\u003c\/li\u003e\n\u003cli\u003eTwo 32A and one 20A three phase outlets and one 15A single phase outlet are rated IP66 (dust tight and protected against powerful water jets), and hardwire terminals suit a fixed connection.\u003c\/li\u003e\n\u003cli\u003eThe lockable, sound deadened canopy has a weather-resistant powder coat and stainless steel fittings.\u003c\/li\u003e\n\u003cli\u003eThe specification includes mine site ready bunding for sites that need fuel spills contained.\u003c\/li\u003e\n\u003cli\u003eAmbient temperatures from -25°C to 45°C are specified, along with humidity below 80% and altitude below 1000 m.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA 290 litre tank and fuel use of about 10 litres an hour at prime load work out to about 29 hours of running. Noise is 66.4 dB(A) at 7 m. The engine is rated 49.0 kW prime and 54.0 kW standby. The design standards are CE, ISO 8528-5:2005, AS 3000-2018 and AS 3010-2017.\u003c\/p\u003e\n\u003ch3\u003eWhat it will run\u003c\/h3\u003e\n\u003cp\u003eAt 40kW prime the PL50X3 has a rated current of about 69A per phase, and at a power factor of 0.8 the loads should be added up in kW as well as kVA. For a three phase set like this, frame the choice around the loads of the site. Typically it suits the refrigeration, pumps, lighting and motors of a cold store, a farm processing operation, a club or a small factory. Because motors draw several times their running current as they start, bring the largest on first, then add other loads, and keep the three phases balanced. The running and starting power of each machine is on its compliance plate. The site load should be assessed by an electrician before the set is specified, and a licensed electrician should do the switchboard connection. Send your load list to us and we will help with sizing.\u003c\/p\u003e\n\u003cp\u003eThe PL50X3 suits cold stores, farm processing, clubs and supermarkets, small factories, and mine and construction camps. With both prime and standby ratings it can cover a mains outage or supply a site that runs it for regular periods.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul style=\"list-style-position: outside; padding-left: 1.5em; margin-left: 0;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput:\u003c\/strong\u003e 50kVA (40kW) prime, 55kVA (44kW) standby @ 0.8PF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated current:\u003c\/strong\u003e 69 Amps per phase (prime)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine:\u003c\/strong\u003e Xinchai 4D35ZD four-cylinder diesel, 1500rpm, water cooled\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlternator:\u003c\/strong\u003e Three phase 4-pole brushless synchronous alternator with AVR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController:\u003c\/strong\u003e ComAp AMF20, two-wire remote start\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStart type:\u003c\/strong\u003e 12 volt electric, battery included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhase \/ voltage:\u003c\/strong\u003e Three phase, 415V, 50Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel:\u003c\/strong\u003e Diesel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel tank:\u003c\/strong\u003e 290 L\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel use:\u003c\/strong\u003e 10 L\/hr at prime load\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRun time:\u003c\/strong\u003e 29 hrs continuous at prime load\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise level:\u003c\/strong\u003e 66.4 dB(A) @ 7m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlets:\u003c\/strong\u003e 2 x 32 Amp and 1 x 20 Amp three phase and 1 x 15 Amp single phase IP66 outlets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardwire terminals:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection:\u003c\/strong\u003e RCD to Australian Standards (IP67 enclosed), over current protection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCanopy:\u003c\/strong\u003e Lockable, sound deadened, weather-resistant powder coat, stainless steel fittings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMine spec:\u003c\/strong\u003e Mine site ready bunding\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (L x W x H):\u003c\/strong\u003e 210 x 95 x 152 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1,315 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 12 months or 1,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine configuration:\u003c\/strong\u003e 4 cylinder, 3.5 L\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine output:\u003c\/strong\u003e 49.0 kWm prime, 54.0 kWm standby\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine capacities:\u003c\/strong\u003e Oil 7.0 L, coolant 5.6 L\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlternator model:\u003c\/strong\u003e PL2B-3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlternator construction:\u003c\/strong\u003e 4 pole, insulation class H, temperature rise class H, IP23\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage regulation:\u003c\/strong\u003e ±0.5%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection class:\u003c\/strong\u003e IP54\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating conditions:\u003c\/strong\u003e Ambient -25 to 45°C, humidity below 80%, altitude below 1000 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRating test conditions:\u003c\/strong\u003e 25°C ambient, 100 m altitude, 30% relative humidity\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign standards:\u003c\/strong\u003e CE, ISO 8528-5:2005, AS 3000-2018, AS 3010-2017\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePart of the ABLE Power range at Gen4Sale.\u003c\/p\u003e","brand":"ABLE","offers":[{"title":"Default Title","offer_id":67546748223679,"sku":"PL50X3","price":14869.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/7409\/5295\/files\/ABLE-PL50X3-1.jpg?v=1791155380"},{"product_id":"75kva-able-diesel-generator-pl75x3","title":"75kVA ABLE Diesel Generator PL75X3","description":"\u003cp\u003eThe PL75X3 is a 75kVA three phase diesel generator rated 75kVA (60kW) prime (PRP) and 82kVA (66kW) standby (ESP) at 415V, 50Hz and a power factor of 0.8. It is powered by a Xinchai AK41LD31, a four cylinder, water-cooled diesel of 4.1 litres running at 1500 rpm, and drives a four-pole brushless synchronous alternator with AVR. Starting is electric with the batteries included, and protection is an IP67-enclosed RCD plus over current protection.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe engine has direct injection and a mechanical governor, so engine speed is regulated mechanically rather than electronically.\u003c\/li\u003e\n\u003cli\u003eThe alternator is wound in 100% copper, with class H insulation, IP23 protection and voltage held within ±0.5%, so the output stays steady as loads change.\u003c\/li\u003e\n\u003cli\u003eThe ComAp AMF controller has a two-wire remote start input, so a switch or external controller can start the set.\u003c\/li\u003e\n\u003cli\u003eThe lockable canopy is sound deadened, with a weather-resistant powder coat and stainless steel fittings.\u003c\/li\u003e\n\u003cli\u003eTwo 32A and one 20A three phase outlets and one 15A single phase outlet are rated IP66 (dust tight and protected against powerful water jets), and hardwire terminals are fitted for a fixed connection.\u003c\/li\u003e\n\u003cli\u003eMine site ready bunding is specified, so fuel spills are contained on sites that need it.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe tank holds 420 litres and noise is 67 dB(A) at 7 m. The engine is rated 74.0 kW prime and 81.0 kW standby, and a coolant heater is needed when the temperature is below 5°C.\u003c\/p\u003e\n\u003ch3\u003eWhat it will run\u003c\/h3\u003e\n\u003cp\u003eAt 60kW prime the PL75X3 has a rated current of about 105A per phase, and at a power factor of 0.8 the loads should be added up in kW as well as kVA. Frame the choice around the combined loads of the site rather than single appliances. Typically it suits the refrigeration, motors, pumps and lighting of a factory, a warehouse or a cold chain facility. Stagger the starts: the largest motor first, then the rest, because motors draw several times their running current as they start. Keep the three phases balanced. Check the compliance plates for each machine's running and starting power. An electrician or engineer should review the site load before the set is specified, and a licensed electrician should make the switchboard connection. Send us your load list and we will help you check the set against your site.\u003c\/p\u003e\n\u003cp\u003eThe PL75X3 suits factories, warehouses, cold chain facilities and mine camps, either standing by for a mains outage or supplying a site with a variable load as prime power.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul style=\"list-style-position: outside; padding-left: 1.5em; margin-left: 0;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput:\u003c\/strong\u003e 75kVA (60kW) prime, 82kVA (66kW) standby @ 0.8PF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated current:\u003c\/strong\u003e 105 Amps per phase (prime)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine:\u003c\/strong\u003e Xinchai AK41LD31 diesel, 1500rpm, water cooled\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlternator:\u003c\/strong\u003e Three phase 4-pole brushless synchronous alternator with AVR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController:\u003c\/strong\u003e ComAp AMF20, two-wire remote start\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStart type:\u003c\/strong\u003e 24 volt electric, batteries included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhase \/ voltage:\u003c\/strong\u003e Three phase, 415V, 50Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel:\u003c\/strong\u003e Diesel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel tank:\u003c\/strong\u003e 420 L\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel use:\u003c\/strong\u003e 19 L\/hr at prime load\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRun time:\u003c\/strong\u003e 22 hrs continuous at prime load\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise level:\u003c\/strong\u003e 67 dB(A) @ 7m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlets:\u003c\/strong\u003e 2 x 32 Amp and 1 x 20 Amp three phase and 1 x 15 Amp single phase IP66 outlets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardwire terminals:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection:\u003c\/strong\u003e RCD to Australian Standards (IP67 enclosed), over current protection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCanopy:\u003c\/strong\u003e Lockable, sound deadened, weather-resistant powder coat, stainless steel fittings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMine spec:\u003c\/strong\u003e Mine site ready bunding\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (L x W x H):\u003c\/strong\u003e 242 x 95 x 164 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1,580 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 12 months or 1,000 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine configuration:\u003c\/strong\u003e 4 cylinder, 105 x 118 mm bore and stroke, 4.1 L, compression ratio 18.0, direct injection, mechanical governor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine output:\u003c\/strong\u003e 74.0 kWm prime, 81.0 kWm standby\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine oil capacity:\u003c\/strong\u003e 7.5 L\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlternator model:\u003c\/strong\u003e PL2D-3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlternator construction:\u003c\/strong\u003e 4 pole, 100% copper windings, 2\/3 winding pitch, insulation class H, IP23, shunt self-excitation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage regulation:\u003c\/strong\u003e ±0.5%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection class:\u003c\/strong\u003e IP54\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoolant heater:\u003c\/strong\u003e Needed when the temperature is below 5°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRating test conditions:\u003c\/strong\u003e 25°C ambient, 100 m altitude, 30% relative humidity\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards:\u003c\/strong\u003e CE, ISO 8528-5:2005, AS 3000-2018, AS 3010-2017\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePart of the ABLE Power range at Gen4Sale.\u003c\/p\u003e","brand":"ABLE","offers":[{"title":"Default Title","offer_id":67546748289215,"sku":"PL75X3","price":18868.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/7409\/5295\/files\/ABLE-PL75X3.jpg?v=1791155381"},{"product_id":"110kva-able-perkins-diesel-generator-pl110pl","title":"110kVA ABLE Perkins Diesel Generator PL110PL","description":"\u003cp\u003eThe PL110PL is a 110kVA three phase diesel generator rated 100kVA (80kW) prime (PRP) and 110kVA (88kW) standby (ESP) at 415V, 50Hz and a power factor of 0.8. A four cylinder, 4.4 litre Perkins diesel, water cooled and running at 1500 rpm, drives a Leroy Somer LSA44.3S5 four-pole brushless alternator with AVR. Electric start is at 12 volts, the battery is included, and an IP67-enclosed RCD and over current protection are fitted.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe ComAp MRS16 controller has a two-wire remote start input, so an external switch or controller can start the set.\u003c\/li\u003e\n\u003cli\u003eTwo 32A and one 20A three phase outlets and one 15A single phase outlet are rated IP66 (dust tight and protected against powerful water jets).\u003c\/li\u003e\n\u003cli\u003eHardwire terminals allow a fixed connection to a site switchboard.\u003c\/li\u003e\n\u003cli\u003eThe canopy has a lock, sound deadening, a weather-resistant powder coat and stainless steel fittings.\u003c\/li\u003e\n\u003cli\u003eFor sites that must contain fuel spills, mine site ready bunding is part of the specification.\u003c\/li\u003e\n\u003cli\u003eAmbient temperatures from -25°C to 45°C are specified, with a coolant heater needed below 5°C, so you can check the set against your site.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe tank holds 580 litres and noise is about 66 dB(A) at 7 m. Its design standards are CE, ISO 8528-5:2005, AS 3000-2018 and AS 3010-2017.\u003c\/p\u003e\n\u003ch3\u003eWhat it will run\u003c\/h3\u003e\n\u003cp\u003eA set this large is chosen for a site's total load rather than for single appliances. Start from a load schedule that lists every motor with its running and starting current and the phase it sits on, and keep the load balanced across the three phases. Pumps, compressors and chillers can draw several times their running current as they start, so the starting sequence matters as much as the total. Check each item's compliance plate, and have an electrician or engineer assess the schedule before the set is specified. Connection to a switchboard should be made by a licensed electrician. Send us your load list and we will help with sizing.\u003c\/p\u003e\n\u003cp\u003eThe PL110PL suits factories, warehouses, cold stores, pumping stations and commercial buildings, as well as mine and construction sites. Its prime and standby ratings let it serve as emergency backup or run regularly on a variable load.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul style=\"list-style-position: outside; padding-left: 1.5em; margin-left: 0;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput:\u003c\/strong\u003e 100kVA (80kW) prime, 110kVA (88kW) standby @ 0.8PF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated current:\u003c\/strong\u003e 140 Amps per phase (prime)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine:\u003c\/strong\u003e Perkins 1104C-44TAG2 diesel, 1500rpm, water cooled\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlternator:\u003c\/strong\u003e Leroy Somer LSA44.3S5 three phase 4-pole brushless alternator with AVR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController:\u003c\/strong\u003e ComAp MRS16 IL4, two-wire remote start\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStart type:\u003c\/strong\u003e 12 volt electric, battery included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhase \/ voltage:\u003c\/strong\u003e Three phase, 415V, 50Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel:\u003c\/strong\u003e Diesel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel tank:\u003c\/strong\u003e 580 L\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel use:\u003c\/strong\u003e 22.6 L\/hr at prime load\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRun time:\u003c\/strong\u003e 25 hrs continuous at prime load\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise level:\u003c\/strong\u003e 66 dB(A) @ 7m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlets:\u003c\/strong\u003e 2 x 32 Amp and 1 x 20 Amp three phase and 1 x 15 Amp single phase IP66 outlets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardwire terminals:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection:\u003c\/strong\u003e RCD to Australian Standards (IP67 enclosed), over current protection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCanopy:\u003c\/strong\u003e Lockable, sound deadened, weather-resistant powder coat, stainless steel fittings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMine spec:\u003c\/strong\u003e Mine site ready bunding\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (L x W x H):\u003c\/strong\u003e 242 x 113 x 171 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1,874 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 3 years or 2,000 hours, prime or standby use\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine configuration:\u003c\/strong\u003e 4 cylinder, 4.4 L displacement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection class:\u003c\/strong\u003e IP54\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating conditions:\u003c\/strong\u003e Ambient -25 to 45°C (coolant heater needed below 5°C)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesign standards:\u003c\/strong\u003e CE, ISO 8528-5:2005, AS 3000-2018, AS 3010-2017\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePart of the ABLE Power range at Gen4Sale.\u003c\/p\u003e","brand":"ABLE","offers":[{"title":"Default Title","offer_id":67546752549055,"sku":"PL110PL","price":31458.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/7409\/5295\/files\/ABLE-PL110PL.jpg?v=1791155531"},{"product_id":"125kva-able-diesel-generator-lg125d3","title":"125kVA ABLE Diesel Generator LG125D3","description":"\u003cp\u003eThe LG125D3 is a 125kVA three phase diesel generator rated 125kVA (100kW) prime and 137kVA (110kW) standby at 415V, 50Hz and a power factor of 0.8. It is powered by a four-cylinder turbo diesel, water cooled and running at 1500 rpm, and drives a four-pole brushless synchronous alternator with AVR. Starting is electric at 24 volts with the batteries included, and protection is an IP67-enclosed RCD plus over current protection.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe engine turns at 1500 rpm and drives a four-pole alternator, the pairing that produces a 50Hz supply.\u003c\/li\u003e\n\u003cli\u003eBrushless construction removes brush wear from the alternator, and the AVR keeps the output voltage steady as the load changes.\u003c\/li\u003e\n\u003cli\u003eThe set can be started remotely: the ComAp AMF20 controller has a two-wire start input for an external switch or controller.\u003c\/li\u003e\n\u003cli\u003eTwo 32A and one 20A three phase outlets and one 15A single phase outlet are rated IP66 (dust tight and protected against powerful water jets), and hardwire terminals are fitted for a fixed connection.\u003c\/li\u003e\n\u003cli\u003eAccess to the set is restricted by a lockable canopy that is sound deadened, with a weather-resistant powder coat and stainless steel fittings.\u003c\/li\u003e\n\u003cli\u003eThe specification includes mine site ready bunding, which contains fuel spills.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAt prime load the set uses 25 litres an hour, so the 680 litre tank gives about 27 hours of running. Noise is 67 dB(A) at 7 m.\u003c\/p\u003e\n\u003ch3\u003eWhat it will run\u003c\/h3\u003e\n\u003cp\u003eThe LG125D3 is a large three phase set, so size it around the combined loads of a site rather than single appliances. At prime it supplies 100kW, with a rated current of 175A per phase, and at a power factor of 0.8 the load should be added up in kW as well as kVA. Typically it suits a plant's motors, compressors and pumps together with lighting, refrigeration and air conditioning. Add loads in steps with the largest motor first, because motors draw several times their running current as they start, and keep the three phases balanced. Check each machine's compliance plate for its running and starting power. An electrician or engineer should assess the site load before the set is specified, and connection to the switchboard through a changeover switch should be made by a licensed electrician. We can help with sizing if you send us your load list.\u003c\/p\u003e\n\u003cp\u003eThe LG125D3 suits commercial and industrial sites: a shopping centre or large retail site, a manufacturing plant, irrigation and pump stations, and mining or construction camps. With both prime and standby ratings it can cover an outage or run for regular periods.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul style=\"list-style-position: outside; padding-left: 1.5em; margin-left: 0;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput:\u003c\/strong\u003e 125kVA (100kW) prime, 137kVA (110kW) standby @ 0.8PF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated current:\u003c\/strong\u003e 175 Amps per phase (prime)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine:\u003c\/strong\u003e Four-cylinder turbo diesel, 1500rpm, water cooled\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlternator:\u003c\/strong\u003e Three phase 4-pole brushless synchronous alternator with AVR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController:\u003c\/strong\u003e ComAp AMF20, two-wire remote start\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStart type:\u003c\/strong\u003e 24 volt electric, batteries included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhase \/ voltage:\u003c\/strong\u003e Three phase, 415V, 50Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel:\u003c\/strong\u003e Diesel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel tank:\u003c\/strong\u003e 680 L\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel use:\u003c\/strong\u003e 25 L\/hr at prime load\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRun time:\u003c\/strong\u003e 27 hrs continuous at prime load\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise level:\u003c\/strong\u003e 67 dB(A) @ 7m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlets:\u003c\/strong\u003e 2 x 32 Amp and 1 x 20 Amp three phase and 1 x 15 Amp single phase IP66 outlets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardwire terminals:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection:\u003c\/strong\u003e RCD to Australian Standards (IP67 enclosed), over current protection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCanopy:\u003c\/strong\u003e Lockable, sound deadened, weather-resistant powder coat, stainless steel fittings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMine spec:\u003c\/strong\u003e Mine site ready bunding\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (L x W x H):\u003c\/strong\u003e 266 x 107 x 188 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2,100 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 12 months or 1,000 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePart of the ABLE Power range at Gen4Sale.\u003c\/p\u003e","brand":"ABLE","offers":[{"title":"Default Title","offer_id":67546752614591,"sku":"LG125D3","price":23859.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/7409\/5295\/files\/ABLE-LG125D3.jpg?v=1791155533"},{"product_id":"165kva-able-diesel-generator-lg165d3","title":"165kVA ABLE Diesel Generator LG165D3","description":"\u003cp\u003eThe LG165D3 is a 165kVA three phase diesel generator rated 165kVA (132kW) prime and 182kVA (145kW) standby at 415V, 50Hz and a power factor of 0.8. Power comes from a six-cylinder turbo diesel, water cooled and turning at 1500 rpm, which drives a four-pole brushless synchronous alternator with AVR. It starts electrically at 24 volts with the batteries included, and protection is an IP67-enclosed RCD plus over current protection.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe six-cylinder turbo diesel runs at 1500 rpm, the speed at which a four-pole alternator produces a 50Hz supply.\u003c\/li\u003e\n\u003cli\u003eThe alternator is brushless, so there are no brushes to wear, and its AVR keeps the output voltage steady as loads come on and off.\u003c\/li\u003e\n\u003cli\u003eThe ComAp AMF20 controller supports two-wire remote start, so a switch or external controller can start the set.\u003c\/li\u003e\n\u003cli\u003eThree phase outlets (two at 32A and one at 20A) and one 15A single phase outlet are rated IP66 (dust tight and protected against powerful water jets), and hardwire terminals suit a fixed connection.\u003c\/li\u003e\n\u003cli\u003eThe lockable canopy is sound deadened, with a weather-resistant powder coat and stainless steel fittings.\u003c\/li\u003e\n\u003cli\u003eSites that need spill containment get mine site ready bunding as part of the specification.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA full 950 litre tank at 40 litres an hour gives about 24 hours of running at prime load. Noise is 67 dB(A) at 7 m.\u003c\/p\u003e\n\u003ch3\u003eWhat it will run\u003c\/h3\u003e\n\u003cp\u003eA set of this size is matched to the combined load of a site. At 132kW prime it has a rated current of 231A per phase, and at a power factor of 0.8 the loads should be totalled in kW as well as kVA. Typically it suits the motors, compressors, pumps, chillers, lighting and control systems of an industrial plant or a large commercial building. Start the largest motor first and add other loads in steps, because motors draw several times their running current as they start, and keep the three phases balanced. The compliance plate on each machine gives its running and starting power. An electrician or engineer should assess the site load before the set is specified, and a licensed electrician should connect it to the switchboard through a changeover switch. Send us your load list and we will help you check the sizing.\u003c\/p\u003e\n\u003cp\u003eThe LG165D3 suits industrial plants, large commercial buildings, communications sites, and mining and infrastructure projects. Its prime and standby ratings let it serve as outage cover or run for regular periods.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul style=\"list-style-position: outside; padding-left: 1.5em; margin-left: 0;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput:\u003c\/strong\u003e 165kVA (132kW) prime, 182kVA (145kW) standby @ 0.8PF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated current:\u003c\/strong\u003e 231 Amps per phase (prime)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine:\u003c\/strong\u003e Six-cylinder turbo diesel, 1500rpm, water cooled\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlternator:\u003c\/strong\u003e Three phase 4-pole brushless synchronous alternator with AVR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController:\u003c\/strong\u003e ComAp AMF20, two-wire remote start\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStart type:\u003c\/strong\u003e 24 volt electric, batteries included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhase \/ voltage:\u003c\/strong\u003e Three phase, 415V, 50Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel:\u003c\/strong\u003e Diesel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel tank:\u003c\/strong\u003e 950 L\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel use:\u003c\/strong\u003e 40 L\/hr at prime load\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRun time:\u003c\/strong\u003e 24 hrs continuous at prime load\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise level:\u003c\/strong\u003e 67 dB(A) @ 7m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlets:\u003c\/strong\u003e 2 x 32 Amp and 1 x 20 Amp three phase and 1 x 15 Amp single phase IP66 outlets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardwire terminals:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection:\u003c\/strong\u003e RCD to Australian Standards (IP67 enclosed), over current protection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCanopy:\u003c\/strong\u003e Lockable, sound deadened, weather-resistant powder coat, stainless steel fittings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMine spec:\u003c\/strong\u003e Mine site ready bunding\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (L x W x H):\u003c\/strong\u003e 320 x 115 x 215 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2,550 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 12 months or 1,000 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePart of the ABLE Power range at Gen4Sale.\u003c\/p\u003e","brand":"ABLE","offers":[{"title":"Default Title","offer_id":67546752647359,"sku":"LG165D3","price":28958.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/7409\/5295\/files\/ABLE-LG165D3.jpg?v=1791155534"},{"product_id":"200kva-able-diesel-generator-lg200d3","title":"200kVA ABLE Diesel Generator LG200D3","description":"\u003cp\u003eThe LG200D3 is a 200kVA three phase diesel generator rated 200kVA (160kW) prime and 220kVA (176kW) standby at 415V, 50Hz and a power factor of 0.8. A six-cylinder turbo diesel, water cooled and running at 1500 rpm, drives a four-pole brushless synchronous alternator with AVR. Electric start runs on 24 volts with the batteries included, and an IP67-enclosed RCD and over current protection are fitted.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eA turbocharged six-cylinder engine at 1500 rpm drives a four-pole alternator, which gives a 50Hz supply.\u003c\/li\u003e\n\u003cli\u003eThe alternator is brushless, so there are no brushes to wear, and the AVR corrects the output voltage as loads change.\u003c\/li\u003e\n\u003cli\u003eRemote starting is through a two-wire input on the ComAp AMF20 controller, which an external switch or controller can operate.\u003c\/li\u003e\n\u003cli\u003eTwo 32A and one 20A three phase outlets and one 15A single phase outlet are rated IP66 (dust tight and protected against powerful water jets), with hardwire terminals for a fixed connection.\u003c\/li\u003e\n\u003cli\u003eThe canopy is lockable and sound deadened, with a weather-resistant powder coat and stainless steel fittings.\u003c\/li\u003e\n\u003cli\u003eMine site ready bunding is part of the specification and contains fuel spills.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAt prime load the set uses about 48 litres of diesel an hour, so a full 950 litre tank lasts about 20 hours. Noise is 67 dB(A) at 7 m.\u003c\/p\u003e\n\u003ch3\u003eWhat it will run\u003c\/h3\u003e\n\u003cp\u003eSize the LG200D3 against the total load of a site rather than single appliances. At 160kW prime it has a rated current of 280A per phase, and at a power factor of 0.8 the loads should be added up in kW as well as kVA. Typically it suits the motors, compressors, conveyors, pumps and lighting of a processing plant or a large commercial complex. Bring the largest motors on first and add other loads in steps, because motors draw several times their running current as they start, and keep the three phases balanced. Each machine's compliance plate gives its running and starting power. An electrician or engineer should assess the site load and the connection before the set is specified, and a licensed electrician should connect it to the switchboard through a changeover switch. Send us your load list and we will help with sizing.\u003c\/p\u003e\n\u003cp\u003eThe LG200D3 suits heavy industrial and commercial sites: processing plants, large commercial complexes, and mining and construction projects. The prime and standby ratings allow either emergency cover or regular running.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul style=\"list-style-position: outside; padding-left: 1.5em; margin-left: 0;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput:\u003c\/strong\u003e 200kVA (160kW) prime, 220kVA (176kW) standby @ 0.8PF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated current:\u003c\/strong\u003e 280 Amps per phase (prime)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine:\u003c\/strong\u003e Six-cylinder turbo diesel, 1500rpm, water cooled\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlternator:\u003c\/strong\u003e Three phase 4-pole brushless synchronous alternator with AVR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController:\u003c\/strong\u003e ComAp AMF20, two-wire remote start\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStart type:\u003c\/strong\u003e 24 volt electric, batteries included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhase \/ voltage:\u003c\/strong\u003e Three phase, 415V, 50Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel:\u003c\/strong\u003e Diesel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel tank:\u003c\/strong\u003e 950 L\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel use:\u003c\/strong\u003e 48 L\/hr at prime load\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRun time:\u003c\/strong\u003e 20 hrs continuous at prime load\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise level:\u003c\/strong\u003e 67 dB(A) @ 7m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlets:\u003c\/strong\u003e 2 x 32 Amp and 1 x 20 Amp three phase and 1 x 15 Amp single phase IP66 outlets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardwire terminals:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection:\u003c\/strong\u003e RCD to Australian Standards (IP67 enclosed), over current protection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCanopy:\u003c\/strong\u003e Lockable, sound deadened, weather-resistant powder coat, stainless steel fittings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMine spec:\u003c\/strong\u003e Mine site ready bunding\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (L x W x H):\u003c\/strong\u003e 320 x 115 x 215 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2,550 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 12 months or 1,000 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePart of the ABLE Power range at Gen4Sale.\u003c\/p\u003e","brand":"ABLE","offers":[{"title":"Default Title","offer_id":67546752680127,"sku":"LG200D3","price":32858.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/7409\/5295\/files\/ABLE-LG200D3.jpg?v=1791155536"},{"product_id":"7kva-able-yanmar-diesel-generator-fp7y1","title":"7kVA ABLE Yanmar Diesel Generator FP7Y1","description":"\u003cp\u003eThe FP7Y1 is a 7kVA single phase diesel generator rated 6kVA (6kW) prime and 7kVA (7kW) standby at 240V, 50Hz and a power factor of 1.0. It is powered by a Yanmar 3TNV76-GGE, a three cylinder, water-cooled diesel running at 1500 rpm, and drives a four-pole brushless synchronous alternator with AVR. Its 12 volt electric start uses the included battery, and protection is an IP67-enclosed RCD plus over current protection.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe four-pole brushless alternator runs at 1500 rpm to give the 50Hz supply, and has no brushes to wear.\u003c\/li\u003e\n\u003cli\u003eThe AVR holds the output voltage steady as appliances switch on and off.\u003c\/li\u003e\n\u003cli\u003eA two-wire remote start input on the ComAp AMF20 controller lets a switch or external controller start the set.\u003c\/li\u003e\n\u003cli\u003eOne 32A outlet and three 15A outlets are rated IP66 (dust tight and protected against powerful water jets), and hardwire terminals are fitted for a fixed connection.\u003c\/li\u003e\n\u003cli\u003eThe canopy locks to restrict access, and it is sound deadened with a weather-resistant powder coat.\u003c\/li\u003e\n\u003cli\u003eMine site ready bunding is part of the specification, which keeps fuel spills contained.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAt 1.8 litres an hour at prime load, the 33 litre tank lasts about 18 hours. Noise is 60 dB(A) at 7 m.\u003c\/p\u003e\n\u003ch3\u003eWhat it will run\u003c\/h3\u003e\n\u003cp\u003eAt 6kW prime the FP7Y1 supplies about 25A at 240V, and at a power factor of 1.0 the kVA and kW figures are the same. Typically that suits lighting, fridges and freezers, a pressure pump, power tools and a home office, provided the combined running load stays within the rating. Pumps, compressors and air conditioners pull several times their running current as they start, so allow for the largest motor. Take the running and starting power from each appliance's compliance plate and total them. A licensed electrician should install the inlet and changeover switch for any home backup connection. Send us your load list and we will help you find the right size.\u003c\/p\u003e\n\u003cp\u003eThe FP7Y1 suits homes, small businesses and farms, from home backup and a farm cottage to a small shop or workshop. Carrying both prime and standby ratings, it can cover an outage or run for regular periods.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul style=\"list-style-position: outside; padding-left: 1.5em; margin-left: 0;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput:\u003c\/strong\u003e 6kVA (6kW) prime, 7kVA (7kW) standby @ 1.0PF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated current:\u003c\/strong\u003e 25 Amps (prime)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine:\u003c\/strong\u003e Yanmar 3TNV76-GGE three-cylinder diesel, 1500rpm, water cooled\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlternator:\u003c\/strong\u003e Single phase 4-pole brushless synchronous alternator with AVR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController:\u003c\/strong\u003e ComAp AMF20, two-wire remote start\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStart type:\u003c\/strong\u003e 12 volt electric, battery included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhase \/ voltage:\u003c\/strong\u003e Single phase, 240V, 50Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel:\u003c\/strong\u003e Diesel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel tank:\u003c\/strong\u003e 33 L\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel use:\u003c\/strong\u003e 1.8 L\/hr at prime load\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRun time:\u003c\/strong\u003e 18 hrs continuous at prime load\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise level:\u003c\/strong\u003e 60 dB(A) @ 7m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlets:\u003c\/strong\u003e 1 x 32 Amp and 3 x 15 Amp IP66 outlets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardwire terminals:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection:\u003c\/strong\u003e RCD to Australian Standards (IP67 enclosed), over current protection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCanopy:\u003c\/strong\u003e Lockable, sound deadened, weather-resistant powder coat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMine spec:\u003c\/strong\u003e Mine site ready bunding\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (L x W x H):\u003c\/strong\u003e 125 x 68 x 101 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 465 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 2 years or 2,000 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePart of the ABLE Power range at Gen4Sale.\u003c\/p\u003e","brand":"ABLE","offers":[{"title":"Default Title","offer_id":67546752712895,"sku":"FP7Y1","price":9878.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/7409\/5295\/files\/ABLE-FP7Y1.jpg?v=1791155537"},{"product_id":"11kva-able-yanmar-diesel-generator-fp11ys","title":"11kVA ABLE Yanmar Diesel Generator FP11YS","description":"\u003cp\u003eThe FP11YS is an 11kVA single phase diesel generator rated 10kVA (10kW) prime and 11kVA (11kW) standby at 240V, 50Hz and a power factor of 1.0. It is powered by a Yanmar 3TNV88-GGE, a three cylinder, water-cooled diesel running at 1500 rpm, and drives a Stamford four-pole brushless alternator with AVR. It has 12 volt electric start with the battery included, plus an IP67-enclosed RCD and over current protection.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe Stamford alternator is brushless, so there are no brushes to wear, and its AVR holds the output voltage steady as the load changes.\u003c\/li\u003e\n\u003cli\u003eThe ComAp AMF20 controller has a two-wire remote start input, so an external switch or controller can start the set.\u003c\/li\u003e\n\u003cli\u003eThree 15A outlets and one 32A outlet are rated IP66 (dust tight and protected against powerful water jets), and hardwire terminals are fitted for a fixed connection.\u003c\/li\u003e\n\u003cli\u003eA lock on the canopy restricts access to the set, and the canopy is sound deadened, with a weather-resistant powder coat and stainless steel fittings.\u003c\/li\u003e\n\u003cli\u003eThe mine spec includes mine site ready bunding for containing fuel spills.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAt prime load the set uses 2.7 litres an hour, so the 65 litre tank gives about 24 hours of running. Noise is 60 dB(A) at 7 m.\u003c\/p\u003e\n\u003ch3\u003eWhat it will run\u003c\/h3\u003e\n\u003cp\u003eAt 10kW prime the FP11YS supplies about 42A at 240V. Typically that suits a workshop, a farm with pumps and power tools, or the essential circuits of a home: lighting, fridges and freezers, a pressure pump and an air conditioner. Allow for starting surges: a motor in a pump, compressor or air conditioner can draw several times its running current when it starts, so leave headroom for the largest. Add up the running and starting power shown on each appliance's compliance plate. For home backup, connection is through an inlet and changeover switch installed by a licensed electrician. Send us your load list and we will help you size it.\u003c\/p\u003e\n\u003cp\u003eThe FP11YS suits farms, workshops, shops and offices, pump sites and home backup. With both prime and standby ratings it can serve as emergency power or as a set that runs for regular periods.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul style=\"list-style-position: outside; padding-left: 1.5em; margin-left: 0;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput:\u003c\/strong\u003e 10kVA (10kW) prime, 11kVA (11kW) standby @ 1.0PF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated current:\u003c\/strong\u003e 42 Amps (prime)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine:\u003c\/strong\u003e Yanmar 3TNV88-GGE three-cylinder diesel, 1500rpm, water cooled\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlternator:\u003c\/strong\u003e Stamford single phase 4-pole brushless alternator with AVR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController:\u003c\/strong\u003e ComAp AMF20, two-wire remote start\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStart type:\u003c\/strong\u003e 12 volt electric, battery included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhase \/ voltage:\u003c\/strong\u003e Single phase, 240V, 50Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel:\u003c\/strong\u003e Diesel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel tank:\u003c\/strong\u003e 65 L\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel use:\u003c\/strong\u003e 2.7 L\/hr at prime load\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRun time:\u003c\/strong\u003e 24 hrs continuous at prime load\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise level:\u003c\/strong\u003e 60 dB(A) @ 7m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlets:\u003c\/strong\u003e 3 x 15 Amp and 1 x 32 Amp IP66 outlets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardwire terminals:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection:\u003c\/strong\u003e RCD to Australian Standards (IP67 enclosed), over current protection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCanopy:\u003c\/strong\u003e Lockable, sound deadened, weather-resistant powder coat, stainless steel fittings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMine spec:\u003c\/strong\u003e Mine site ready bunding\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (L x W x H):\u003c\/strong\u003e 137 x 73 x 112 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 562 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 2 years or 2,000 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePart of the ABLE Power range at Gen4Sale.\u003c\/p\u003e","brand":"ABLE","offers":[{"title":"Default Title","offer_id":67546752778431,"sku":"FP11YS","price":12869.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/7409\/5295\/files\/ABLE-FP11YS.jpg?v=1791155538"},{"product_id":"14kva-able-yanmar-diesel-generator-fp14ys","title":"14kVA ABLE Yanmar Diesel Generator FP14YS","description":"\u003cp\u003eThe FP14YS is a 14kVA three phase diesel generator rated 13.5kVA (10.8kW) prime and 14kVA (11kW) standby at 415V, 50Hz and a power factor of 0.8. A Yanmar 3TNV88-GGE, a three cylinder, water-cooled diesel running at 1500 rpm, drives a Stamford four-pole brushless alternator with AVR. Electric start runs on 12 volts with the battery included, and an IP67-enclosed RCD and over current protection are fitted.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe Yanmar engine turns at 1500 rpm and drives a four-pole alternator, the pairing that produces a 50Hz supply.\u003c\/li\u003e\n\u003cli\u003eThe Stamford alternator is brushless and has an AVR, so there are no brushes to wear and the output voltage stays steady as the load changes.\u003c\/li\u003e\n\u003cli\u003eA two-wire remote start input on the ComAp AMF20 controller lets an external switch or controller start the set.\u003c\/li\u003e\n\u003cli\u003eThree 15A single phase outlets and one 20A three phase outlet are rated IP66 (dust tight and protected against powerful water jets), so both kinds of load can be connected, and hardwire terminals are fitted for a fixed connection.\u003c\/li\u003e\n\u003cli\u003eA lock, sound deadening, a weather-resistant powder coat and stainless steel fittings come with the canopy.\u003c\/li\u003e\n\u003cli\u003eMine site ready bunding keeps fuel spills contained.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAt prime load the set uses about 3 litres of diesel an hour, so a full 65 litre tank runs it for about 22 hours. Noise is 60 dB(A) at 7 m.\u003c\/p\u003e\n\u003ch3\u003eWhat it will run\u003c\/h3\u003e\n\u003cp\u003eAt 10.8kW prime the FP14YS has a rated current of 19A per phase. It is a small three phase set, so frame the choice around the machines on site rather than single appliances. Typically it suits workshop machines, a pump or small compressor, a cool room, and lighting and power for a small factory or commercial kitchen, with the single phase outlets for tools and lighting. Start the largest motor first and bring other loads on afterwards, because motors draw several times their running current as they start, and keep the three phases balanced. Take the running and starting power for each machine from its compliance plate. An electrician should assess the site load before the set is specified, and connection to the switchboard through a changeover switch should be made by a licensed electrician. If you have a load list, send it to us and we will help with sizing.\u003c\/p\u003e\n\u003cp\u003eThe FP14YS suits workshops, small factories, farms with irrigation pumps, cool rooms and commercial kitchens. Its prime and standby ratings let it cover an outage or run for regular periods on a working site.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul style=\"list-style-position: outside; padding-left: 1.5em; margin-left: 0;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput:\u003c\/strong\u003e 13.5kVA (10.8kW) prime, 14kVA (11kW) standby @ 0.8PF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated current:\u003c\/strong\u003e 19 Amps per phase (prime)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine:\u003c\/strong\u003e Yanmar 3TNV88-GGE three-cylinder diesel, 1500rpm, water cooled\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlternator:\u003c\/strong\u003e Stamford three phase 4-pole brushless alternator with AVR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eController:\u003c\/strong\u003e ComAp AMF20, two-wire remote start\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStart type:\u003c\/strong\u003e 12 volt electric, battery included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhase \/ voltage:\u003c\/strong\u003e Three phase, 415V, 50Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel:\u003c\/strong\u003e Diesel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel tank:\u003c\/strong\u003e 65 L\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel use:\u003c\/strong\u003e 3 L\/hr at prime load\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRun time:\u003c\/strong\u003e 22 hrs continuous at prime load\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise level:\u003c\/strong\u003e 60 dB(A) @ 7m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlets:\u003c\/strong\u003e 3 x 15 Amp single phase and 1 x 20 Amp three phase IP66 outlets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardwire terminals:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection:\u003c\/strong\u003e RCD to Australian Standards (IP67 enclosed), over current protection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCanopy:\u003c\/strong\u003e Lockable, sound deadened, weather-resistant powder coat, stainless steel fittings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMine spec:\u003c\/strong\u003e Mine site ready bunding\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (L x W x H):\u003c\/strong\u003e 138 x 71 x 108 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 530 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 2 years or 2,000 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePart of the ABLE Power range at Gen4Sale.\u003c\/p\u003e","brand":"ABLE","offers":[{"title":"Default Title","offer_id":67546752843967,"sku":"FP14YS","price":12869.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/7409\/5295\/files\/ABLE-FP14YS.jpg?v=1791155539"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/7409\/5295\/collections\/ABLE-PL8D1.jpg?v=1791156494","url":"https:\/\/gen4sale.com.au\/collections\/able-generators.oembed","provider":"Gen4Sale","version":"1.0","type":"link"}